#Adamsclasp

Hii Friends!
This is a video on demonstration of adams clasp. In this video i have made step by step preparation of making adams clasp fast and easily.
If you have any question and if this video was helpful pls do write in the comment section below.
pls like and subscribe my channel.
#adamsclasp

[@AtoZKidsdental]

Hii Friends!
This is a video on demonstration of adams clasp. In this video i have made step by step preparation of making adams clasp fast and easily.
If you have any question and if this video was helpful pls do write in the comment section below.
pls like and subscribe my channel.
#adamsclasp

[@Dr.Madhav_sunil]

AtoZ Kidsdental . In the arrow head portion there must be a 45 degree bend not a 90 degree bend .

[@AtoZKidsdental]

@@Dr.Madhav_sunil The bridge of the adams clasp should be at 45 degree angulation not the arrow head so per convenience if we bend the wire at 90 degree at the arrow head Was done at one of steps so the bridge will follow a 45degree angulation.

[@MeheraMirge]

Finally the video that shows million dollar bend...Thank You Sir !!

[@AtoZKidsdental]

Your welcome Doctor

[@ais_h_u]

When I was in final year😂😂 I was watching step by step and doing.. now in internship I'm watching them again.. next in pg also maybe will watch.. literally your videos are saving my life

[@AtoZKidsdental]

That’s So Motivating and Inspiring for me Doctor
Thanks

[@shinu_arts7764]

It was so useful tqsm . I was struggling so much asking my frnds all the time ,but this one was really easy to understand and make tqsm ❤️🥺.

[@AtoZKidsdental]

Thanks for your appreciation doctor 👨‍⚕️

[@AsmaAbbas-jh5hx]

thank you so much this made so much difference

[@dr.rafsunsams8193]

awsome simple demonstration

[@AtoZKidsdental]

Thanks for your appreciation doctor

[@ksamrithaparvathy8135]

Thank you for this wonderful demo💯

[@AtoZKidsdental]

Thanks for your appreciation doctor 👨‍⚕️

[@omnia5100]

عااش❤️❤️

[@AtoZKidsdental]

Thankyou so much Dr 😇

[@explaindentistry]

Very helpful video

[@AtoZKidsdental]

Thanks for your appreciation doctor

[@dentistvsgamer2236]

Nice demo sir

[@AtoZKidsdental]

Thanks

[@user-ji5eo6mq3z]

Awesome

[@AtoZKidsdental]

Thanks for your appreciation Doctor

[@olgaskrypka3726]

Really appreciate your video🙏, I was struggling with Adam's clasps because the way I did them was way harder, thanks a lot! Subscribed👍

[@AtoZKidsdental]

Thankyou so much doctor for your appreciation 😇

[@Ram-zi1if]

I'm watching this sitting in our department of orthodontics.
I have my final year exams in may-june 2023.

[@AtoZKidsdental]

That’s Great
Wish you all the best 👍🏻

[@Ram-zi1if]

@@AtoZKidsdental thank you sir☺️

[@AtoZKidsdental]

Your welcome doctor

[@dantegeethika3178]

Very helpful

[@AtoZKidsdental]

Thanks for your appreciation Doctor

[@akshaymanoj4964]

Wow! 🤩😍 That was really Simple and Helpful!! ... Thank You So Much!!

[@AtoZKidsdental]

Thanks Doctor

[@ThelmaFabian-bx9vn]

Nice video sir

[@AtoZKidsdental]

Thanks for your appreciation Doctor

[@odontoiatria01]

DentistryUnlimited
👍👍👍

[@AtoZKidsdental]

Thanks

[@Dr_Jeeshma]

@AtoZ kidsdental,sir,practised by seeing this demonstration.Passed final yr🙏

[@AtoZKidsdental]

That’s so great
Congratulations Dr

[@Dr_Jeeshma]

@@AtoZKidsdental thank u sir🙏

[@AtoZKidsdental]

Your welcome doctor

[@shivkr7559]

What's the steel wire u used? Can u drop any links to buy?

[@AtoZKidsdental]

Hi Doctor
The steel wire is 21 gauze stainless steel wire
It’s from company smith
You can get these wire from any dental material shops around you or from dental expodents

[@chienvu8605]

Ok

[@AtoZKidsdental]

Thanks

[@blooooke]

Stuck at Million dollar bend

[@Dr_Jeeshma]

Sir,u have given 90 degree bend in one step ..is it not 45 degree? At time 5:17 you r giving 90 degree bend for arrowheads ,is it not 45 degree?

[@iHelpNEETAspirants]

Hi Dr Pls elaborate so that I can be sure at which point if I am right or wrong

[@AtoZKidsdental]

Ok Dr that bent at 90 degree is given so that the angulation of bridge When arrow head rest on the undercuts is at 45degrees .. that is when we place arrow heads perpendicular to the undercuts then our bridge should be angulated at 45degrees
Hope you got my point doctor

[@Dr_Jeeshma]

@@AtoZKidsdental I didn't understand sir..sir,u mean when we give 90 degree for arrowheads, automatically bridge will be at 45 degree?

[@AtoZKidsdental]

@@Dr_Jeeshma suppose doctor we place any thing perpendicular to one surface and again place a 90 degree bend of that thing then the relation of this second bend would be at 45 degrees to the surface on which we placed our first bent

[@Dr_Jeeshma]

@@AtoZKidsdental ok sir, thank u so much.Tmrw is practical exam.Adams clasp will come.Thank u for ur demonstration.Plz wish me luck

[@omarnawar5289]

لابس جلوفز ليه ي فلاح

[@AtoZKidsdental]

Pls explain in english Dr

[@dr.soumyasalinikar7664]

What gloves are you wearing sir?? My palms are always sweaty

[@AtoZKidsdental]

Hi Dr...these are nitrile gloves..u can use them as they are powder free and more comfortable..but choose the size wisely..also what i realized is that sweating is more when you deglove it after your work..

[@dr.soumyasalinikar7664]

@@AtoZKidsdental thank you sir.😊

[@ashfaqkhantarani5531]

A grade de denge kia yad rakhoge,wese aise clasp hamare ortho teacher bahir phenk dete hai

[@AtoZKidsdental]

It is not about the teacher who may throw or not
It is about the method to prepare the clasp and steps involved that will refine once you master it
Hope you got my point doctor

[@bracesndfaces]

Shouldn't mislead the students. There are so many errors in your clasp design. And the adams clasp gets retention from mesiobuccal and distobuccal under cuts not from embrasures.

[@AtoZKidsdental]

It’s better to concentrate on the steps of fabrication rather than the final design
Also didn’t mentioned anything related to retention from undercuts
Thanks

[@befreeman5195]

​@@AtoZKidsdental.

[@Choudhary.923]

Fir bhi sign nhi dete teacher 😢

[@AtoZKidsdental]

Don’t worry
Don’t work for sign
Learn to be perfect

[@nihalindianartist7289]

Wrong dlt it

[@AtoZKidsdental]

Why wrong
Can you elaborate

[@ciaramcwilliams5291]

I cannot understand some words you are saying

[@AtoZKidsdental]

Pls elaborate which words dr

[@ciaramcwilliams5291]

You said engaging into the something its at 7.06 in the video

[@AtoZKidsdental]

Yes I said it is engaging in the embrasure...I.e mesial and distal embrasure Of tooth

[@ciaramcwilliams5291]

Thank you so much 😁

[@AtoZKidsdental]

@@ciaramcwilliams5291 Thankyou so much dr if i could fulfill my motive of helping

[@karthikanair1565]

This is so wrong method to made Adams clasp

[@AtoZKidsdental]

Nope

[@livebet5832]

​@@AtoZKidsdentalisn't it 45 degree

[@AtoZKidsdental]

Yes Doctor it is

[@livebet5832]

@@AtoZKidsdental then why are you using 90 degree doc.

[@AtoZKidsdental]

For the bridge when bent at !90 degrees then during million dollar bend it will angulate at 45 degrees finally

[@harshitkumar4217]

Nice video sir

[@AtoZKidsdental]

Thanks for your appreciation doctor

[@mercykivuva6905]

Nice video Sir

[@AtoZKidsdental]

Thanks for the appreciation Dr