Video není dostupné.
Omlouváme se.

DX27 Clamshell Rooftop Tent - The Bush Company

Sdílet
Vložit
  • čas přidán 29. 05. 2021
  • www.thebushcom...
    Designed and manufactured in South Africa, the Clamshell Rooftop Tent DX27 brings together The Bush Company's many years of experience in aluminium manufacturing with first hand experience of touring/camping to deliver an innovative yet proven product that sets new benchmarks in quality, practicality and reliability, plus the convenience of setting up/packing down in under 90 seconds.
    Whether you are looking for your first roof top tent or upgrading your existing setup, the Clamshell Rooftop Tent DX27 has a number of unique features that will leave you knowing from the outset that you made the right choice. The basic dimensions of the DX27 are listed below, but check out the product description below to see a full list of the features and find out why this is one of the best roof top tent on the market
    Clamshell Rooftop Tent - DX27 Key Features
    - External Length: External Frame 2.25m /7' 4.6" (2.32m / 7' 7" inc hinges & handles)/ internal (mattress) 2.15m (7' 0.6")
    - External Width: External 1.4m (4' 7.1"), 1.45m (4' 9") including gas struts, / internal (mattress) 1.3m (4' 3.6")
    - Height (exterior, closed): 28cm (10.7") including roof rails and base extrusions
    - Max Height (exterior, open): 1.77m (5' 9")
    - Max Height (interior, headroom open): 1.7m (5' 7")
    - Internal Mattress: Length 2.13m / 7', Width 1.28m / 4' 2"
    - Weight: Approximately 99kg (218lbs) excluding telescopic ladder
    - Standard fitting kit/brackets included with tent.
    - Fully seam welded lightweight alloy frame with high quality powder coated finish.
    - 2m (6' 6.7") long cargo rails welded to side of the roof, suitable for attaching accessories or the optional roof load bars .
    - Internally reinforced roof load rated to 200Kg (440lbs) when roof closed, gas struts able to open unaided with 50kg (110 lbs) on roof.
    - 'Ezi-Solts' folded into sides of base and roof for easy attachment of accessories such as awnings, hi-lift jacks, light bars etc.
    - Single layer of 310g poly cotton rip stop mold and mildew resistant canvas on body of tent.
    - Easy set up external on piece rainfly covering sides and rear as standard
    - All entry points use YKK zips and high quality midge mesh and internal canvas door.
    - Internal wired LED light (shines white or amber).
    - Electrical socket each with twin USB & CIG Socket plug, mounted to internal roof.
    - 12cm (4.7") of storage space above mattress when tent closed, so plenty of room for bedding, pillow, fishing rods, rifles etc.
    - 3 storage pouches on inside of roof, large storage pouch on each side.
    - 70mm / 3.2" thick super high density mattress with removable zipped canvas cover.
    - Marine carpet underneath mattress and carpeted internal roof.
    - Telescopic 2.6m (8' 4.3") aluminium ladder with attachment points at rear and sides, comes with canvas storage bag.
    - Two heavy duty 20mm (0.08" high) aluminium extruded rails with M8 extrusion on sides and base underneath tent for easy mounting.
    - 2 Year conditional warranty.
    Social Media Sites
    You Tube: / thebushcompanyaustralia
    Facebook: / thebushcompany
    Instagram: / thebushcompany
    #thebushcompany #rooftoptent #letsgoplaces #liftedtoyota #campinglife #overlandlife #adventuremobile #vanlife #overlandbound #overlanding #offroad #overland #adventure #camping #explore #offroading #overlanderr #lifted #expedition #outdoors #camp #tent #offroadnation #offroadlife #4wd #rooftoptentliving #rooftoptentlife #gobush #bushlife

Komentáře • 32

  • @MILLSYDOG1
    @MILLSYDOG1 Před 3 lety +5

    Awesome video . Would love one, but god dam they are so heavy think my roof would brake haha

  • @MrDeymann
    @MrDeymann Před 8 měsíci

    Why not put a slot in for a heater hose???

  • @HammerRocks
    @HammerRocks Před 3 lety +4

    Do you guys plan to offer a clamshell style tent with a closed height of 200mm or less? I like your products but 280mm is just too tall for my liking. I'm in the market for a RTT now but would like to keep weight and closed height to a minimum. At the moment non of your RTT offering fits the bill. But if you have something that is 200mm or less in closed height that is due for release, I'd wait to see it before making my final decision.

    • @hieuphan4264
      @hieuphan4264 Před 3 lety

      Yeh, i aslo refer a thinner close height due to it will look a lot better on the the roof

    • @ricko2282
      @ricko2282 Před 3 lety

      Agree too, similar to motop

    • @hieuphan4264
      @hieuphan4264 Před 3 lety

      Yeh. I will go with motop too

  • @johndiaz7240
    @johndiaz7240 Před 3 lety

    Excellent products thanks

  • @fabienpics
    @fabienpics Před 3 lety

    LIKE ALL YOU RE PRODUCT, VERY GREAT ONE . 🥇🥇🥇🥇🥇

  • @OzYeti
    @OzYeti Před 3 lety

    Like the less canvas and height option than the Alpha. Can the Alpha be converted to this?

  • @ryoc2138
    @ryoc2138 Před 3 lety

    Nice tent, but is there any plan to make a hardshell RTT with the 8 mil accessory mounting channels that open straight up on both ends? Something similar to the Bundatec, minus the winch and cables...

  • @stuartkcalvin
    @stuartkcalvin Před 3 lety +1

    Good piece, thanks.

  • @darrenc4096
    @darrenc4096 Před 3 lety

    Nice bit of kit. 👍🍺

  • @blanchardelectrical1245
    @blanchardelectrical1245 Před 3 lety +13

    Any options that don’t need a second mortgage? 😂😉

    • @lukewarm2075
      @lukewarm2075 Před 3 lety +2

      Yeah my thought too. You can buy alot of double swags

    • @dylanjames5499
      @dylanjames5499 Před 3 lety

      Can buy the motop rooftop tent for 3700

    • @TyFenwick
      @TyFenwick Před 3 lety +2

      Good gear ain’t cheap and cheap gear ain’t good mate. These tents are the best on the market !

    • @blanchardelectrical1245
      @blanchardelectrical1245 Před 3 lety

      @@TyFenwick I’m sure if I owned one I would be saying the same, but personally I cannot justify a $4k+ bed for the night 😂

    • @TopoPilot
      @TopoPilot Před rokem

      @@blanchardelectrical1245 You spend more than that a year at the pub.

  • @brianostwald802
    @brianostwald802 Před 3 lety

    Brilliant guys

  • @potentpossum1
    @potentpossum1 Před 2 lety

    Is this an upgrade to the Alpha tent?

  • @taylorbovell4948
    @taylorbovell4948 Před 3 lety

    Looks good, do you have any stockists near Darwin, NT?

  • @jacks86australia
    @jacks86australia Před 3 lety

    It would be good to offer a narrower and slimmer option. Something with an outside dimension of 1200. Lighter the better. I had a motop tent and liked the dimensions, just hated the quality. Just checked, these are 94kg, that's far too heavy for most roofs when you then throw on an awning and mounting systems.

    • @jacks86australia
      @jacks86australia Před 2 lety

      Hey mate, they are fine if you understand that you get what you pay for, the canvas is thin, it will leak, condensation and overall build quality is low. It's budget for a reason. The leaking was what I hated.

  • @Bigsoot7393
    @Bigsoot7393 Před 3 lety

    I want to buy a rooftop tent off you but you have none in stock and won't get back to me when they will be in stock?

    • @TyFenwick
      @TyFenwick Před 3 lety

      Best to put your name down on one with your local dealer mate. Stock is all pre sold because there such high quality tents.

    • @Bigsoot7393
      @Bigsoot7393 Před 3 lety

      @@TyFenwick too late now bought another brand

  • @FelipeSarmiento
    @FelipeSarmiento Před rokem

    $?

  • @JayDee25895
    @JayDee25895 Před 3 lety +1

    I want a BLK Series If you guys would support it I would buy one at cost and put your LOGO on my truck for Five Years as I drive to events all around Texas.

  • @229Reaper
    @229Reaper Před 3 lety

    do you shipp to Canada?

  • @stevendilnott4399
    @stevendilnott4399 Před 3 lety

    how hi