Everything you NEED TO KNOW to Cut Shadow Foam!
Vložit
- čas přidán 3. 07. 2024
- I've been cutting Shadow Foam for over 10 years now, and along the way I've learnt and created a lot of "top tips" to help make the process easier, quicker and produce better results! You may often see these tips in my videos as "Jona's Top Tips"!
Well, this week, I've decided to lump them all together and create the dedicated encyclopaedic video containing every top tip I have for cutting Shadow Foam! It's a masterclass video that is essential viewing for anyone looking to take their tool storage and organisation seriously! Check it out at the link below!
00:00 Top Tips for Shadow Foam
00:52 Tips for Cutting Shadow Foam
01:42 How to Attach Blades to Scalpels
03:49 How to Avoid Cutting Yourself
04:27 How to Cut around Delicate Items
04:57 Paper Templating Tips
06:11 Tips for Peeling Shadow Foam
07:04 Depth Marking Tips
07:39 How to Peel Shadow Foam
09:56 Alternative Ways to Peel Shadow Foam
11:43 How to Peel Narrow Items
13:04 How to Peel All the way Through
16:38 Tips for Smoothing
17:00 How to Smooth in Awkward areas
18:17 Tips for Layouts
19:39 How to Save Space in the Layout
20:41 How to Save Space with Pliers
21:34 How to straighten layouts
23:07 Hot to reduce the tact of masking tape
23:55 How I do Layouts
26:13 Hiding Items underneath others in Shadow Foam
29:43 Tips for Accessibility
31:16 Alternative Ways to add Fingerpulls to Shadow Foam
32:26 Adding "Tram lines" to Shadow Foam
36:18 Submit your own Shadow Foam Tips!
Have a SUGGESTION of what you want to see NEXT? Comment below!
SUBSCRIBE for more videos:
bit.ly/SFSUBSCRIBE
Watch our LATEST VIDEO:
bit.ly/SFVIDEO
Made possible with Shadow Foam, get yours here:
bit.ly/SHADOWFOAM
FOLLOW US ON
Facebook: / shadowfoam
Twitter: / shadowfoam
Instagram: / shadow_foam
CZcams: / shadowfoam
Music:
All music used has been licensed for third party usage through motionarray.com - Jak na to + styl
Thanks to you today i made my first knife collection using foam which is looking nice❤
Great timing, my order arrived today so armed with these tips I'm going to start play testing layouts tomorrow.
Feel a lot more optimistic that I'll get a decent result having watched this video.
Great tips 👍🏼
Looking forward to this! Love a tips video!!!
Hope I didn’t disappoint! 🙏
Always love your stuff mate!
I have foam inserts for my DeWalt Tough 2 rolling system. I’m currently buying a premium tool set from scratch to go in it, as it’s pretty much Knipex lead it’s expensive and taking me a while to afford to get them all together before I cut my foam. I’m really looking forward to the day when I can start it 😊
Great tips.
Thanks Mark, any stand out to you?
You must have heard me on Wednesday experimenting on my first project with Shadowfoam, thank you for the invaluable tips to help those with arthritic hands.
Great video Jonathan.
My pleasure mate, I hope these tips help! 👍
Love the wee pop up trick because I don’t really like a visual finger pull I’ll definitely be using this 👌
Happy to help mate, let me know how it goes on your project! 👍
Great set of tips, the pop up of the pad saw is 1 I am going to steal 👍. For my test leads, I use a wooden or steel object to scribe around, so I don't cut into the lead insulation. In my Teng tool chest, they have double layered a lot of tools, the pliers are a good example, where they would lay the side cutters on top of the combo pliers.
Great tips Three Phase, why does that not surprise me?
That’s good advice👍👍👍👍🙂🙂👌👌
Glad you think so!
Metalworker here - Springs, like the one in your pliers, don't wear out from being compressed. They don't wear out from being opened. They wear out from being repeatedly compressed and uncompressed. You won't wear out your pliers with the handles squeezed together in your display. You will wear them out actually using the pliers, but what good is a tool you don't use?
Thanks for the info! 👍
I found that for large areas where you have to peel, scoring lines along the area to the same depth as your outline helped as you were peeling back several smaller strips instead of trying to peel one massive strip. A similar process you would use when you are removing garden turf
Not a bad shout that, thanks for sharing that tip! 👍
Nice video there m8 love the stuff just need afford buy some 🏴👍
Thanks Michael, appreciate that! 👍
NIfty pop up seems a great idea
Definitely, worth a go!
Hey brilliant helpful video, one question i have though is im using some shadow foam for a shadow box and id like to paint the shadow foam what would be the best way to go about doing that ?
Great video good tips “ where did you get them screwdriver extensions from and what brand are they “
Can we have a video on the Bosch 12V FC35 to put in l box as I don’t seem to see many videos on Bosch equipment only Dewalt, Ryobi,Milwaukee and skill lets us know please 🙏 thank you
Hi mate, I know you've done a halfords one already however was just wondering if you've got any tips for the big toolkit they do (the 200 piece one) as the toolbox is pretty hopeless and feel like you could come up with a better solution including a different toolbox, look forward to hearing your thoughts!
Thank you for the video this is great i have just bought my new tool box so will be ordering some soon, any news on purple color ?
Working on purple, hope to have an announcement soon! 👀
Hi there , I’m getting the orange foam for a triple rollar pack to put my photography lenses and gear. Any tips!! ?? Lenses will go downwards on double set I think and now bought the Bosch hole saw set!! Will be ideal for the lense holes. And my lights and flashes.
Great set by bosch btw. Next my festool kit. Wanna help?
Hi there, thanks for the video. I have just invested a Makita set and will be using shadowfoam to get them nicely organised. Quick question - I'd like to get some of my other corded power tools in foam too. I have searched through your vids tips on this but didn't spot anything so far. Do you have any advice for corded tools? E.g. where to set the cables/plug. Would you get really thick foam to cut a deep cavity behind the tool or is there some other good method to keep it all looking tidy? Many thanks. Keep up the good work.👍
20:27 If the spring does wear out, you can replace it with a binder clip/ bulldog clip spring. They're cheap at the dollar store.
Thanks for the tip mate I appreciate that!
Great tips, if you had something particularly large can you stack shadow foam? Like a bottle jack for example.
Absoluteky! You can stack Shadow Foam as trays or glue it together! 👍
Trying to find the right case to organise my EDC knives, tools etc
What have you got so far?
About 20 knives, four or five multitools, pocket screwdrivers, Knipex cobra XS etc and about half a dozen torches. Some AAA, some much bigger. Currently it’s kinda all over the place! All “pocket” sized though overall so should be easy enough to find a box big enough!
Any tips for if the base of your box isn’t flat. I’m looking to do the inside of a BMW Vario top box and so the base is not square and flat. So need to get the foam to fit before worrying about tool layout
Hi Johnathan, quick question. Can I join 2 together (side by side) to make 1.2m in length with perhaps double sided tape or something else, put them in a frame to make a housing for my parallel guides?
Idea for the foam cutting kit.
Can you make a tool with a sort of U-Shaped blade on the end to easily cut out slots to take out tools from the foam
why not just cut some fingerpulls into the foam so you can take the tool out with your hand?
Lots of good tips there.
I have 200 router cutters that I want to store in drawers and a systainer for mobile use. What is the best way to cut 200 neat holes in 8mm, 1/4 and 1/2 inch diameters into shadowfoam?
Thanks David! I’d say templating is a good option.
If I were to do that I would probably mark out a grid of dots with a silver sharpie and then heat up a 1/4” metal bar and melt the holes.
I may have to make a video about cutting circles 👍
Are there things like solvents that I need to keep away from the foam? Don't want to melt it!
Any suggestion on shadow foam suppliers in the US? Will get a bit pricey to ship it from the UK 🙈
I'm ordering this now! where do you suggest purchasing the shadow foam itself?
Www.shadowfoam.com
You should've shown the tip for hiding the longer items, like screwdrivers, underneath other items so you can only see the handle but you can lift it and slide it out.
Is there an option to have a Smoothing spinner to fit a rotary tool? Those who struggle with dexterity may favour the lighter tool option
Definitely something I can look into 👍
Use the 'forceps' Luke.
😅😅😅
Could you add an option on your site for the milwaukee drawers to select if you want 2 or 3 inserts? I cant justify buying 2 twin packs when i will have one insert go to waste.
Shall pass this on to my web team! 👍
@@ShadowFoam Thanks
Pls allow one question: Is finding the right layout the hardest thing? I've got now the 30mm/50mm-Set for my Makita-Boxes and I'm goin to be crazy to find the best layout 🤪
It is tricky mate, but once you’ve found it, you’re golden!
Ik it's sounds stupid but how would I cut the sheet down to fit into my toolbox drawer as I want some for the draws in my top box and the smallest sheet you offer is too big lol. Just mask a straight line and go down it with a blade?
Is it a box we make inserts for?
Why is it you can't buy a milwaukee packout 3 draw foam pack. They only come in packs of 2
Well first feedback/tip from an utter novice. I failed to factor in how a bag reacts when stretched slightly meaning the foam I ordered was slightly too long (better than short!)
So needed to cut 30mm off one end and to be honest didn't fancy using a scalpel. So armed with ad much courage ad I could muster I borrowed a large kitchen knife (non serrated) and using a slow sawing motion keeping neat to vertical and using a metal straight edge it produced a perfect cut through 70mm of shadowfoam.
Slow and steady produced a great cut, can’t in good faith agree with the knife but I’m happy you ordered slightly big rather than slightly small! What was your Shadow Foam project?
Agree the large kitchen knife isn't the ideal tool but the result wad very neat
Haven't finished the project yet but it will be a duffel style kit bag for holding a crossbow in it's primary component parts.
Wouod love to put shadow foak into my big costco toolbox but its just too expensive for me i had to resort to get like the foam gym mats and cut them out.
Too expensive? What were you ordering and from where?
You can get packs of 5 online for cheap. Big enough to fit in my snap-on tool box.
Wow
Thanks Andrew! Some great tips in here!
Great vid from over in the UK land area... tho my people dont use Shadow foam.... they use WRAITH foam... SFMF
What area are you from?
@@ShadowFoam Arifkknzona, USA. my mom was born in IRE however.
Some use typical PE closed cell packaging foam. It is a little cheaper and you get a bit more of it for your buck but it only comes in black and white. I used it as I had some lying around from a delivery and it did the same purpose and cut like a charm. Shadow foam's vibrant colours is where they excel and is worth the little extra money if you want a really professional looking tool storage solution! Shadowfoams layers are slightly thinner at 5mm also meaning its easier to achieve the depth you want whereas the one I used is 10mm layers. Wraith foam does looks a little crumbly like the stuff you press fake flowers into
i'm currently trying to get a halfords 1/2" ratchet set into a packout compact organise / half of a packout organiser but proving to be a tight fit. Anyone attempted this?
Have you tried putting the ratchets on their sides to reduce space?
@@ShadowFoam i shall try this out, thanks 😀
When are you doing the results for the Allen key giveaway video
In a couple weeks! Don’t worry, we will announce it! 👍
Where can I buy 4ft by 8 ft sheets of shadow foam
Check out our custom sizes page at www.shadowfoam.com
@@ShadowFoam tjanks
that foam, what is it called, I know you call it shadow foam, but does it have a special name, trying to locate it in my area in Denmark..
We ship to Denmark at www.shadowfoam.com
thanks.. ill look into it.@@ShadowFoam
Can I have some of your stickers for my 1:32 scale modelling so I can make a layout of your unit and vans
Hi Tom, that sounds fantastic! Drop my team an email at m.wood@shadowfoam.com and they’ll get that sorted for you!
For us Americans please use both Metric and Imperial measurements it will make life much easier for us.
Duly noted! Thank you! I’d be happy to do any conversion you need here in the comments
I can do most of it in my head but some people might have a hard time figuring it out@@ShadowFoam
the pop up is the best in my opinion lol, im nearly at 1000 subs 😃 cmon 😅
I quite like it too! I’ve subbed to your channel! The first 1000 is the hardest, cmon!
ooooyeah!!!! thankyou!!!! much appreciated 👏
You have a screwdriver missing
And look how easily that is to identify thanks to Shadow Foam! 👍
😂 Was just looking at that on last video.
Your shadow foam is expensive
Are you looking on www.shadowfoam.com?
It’s a once in a while purchase. For me, as I spend a fair bit on tools, housing them in an expensive case is an investment. The coloured Shadow Foam will show up if you’re missing a tool, that could pay for itself in one instance.
A 125mm Knipex plier/wrench I have is about the £40 mark, having foam to ensure I don’t leave it anywhere is a bargain. If you have scruffy cheap tools ( nothing wrong with that, some people don’t want to spend money on expensive tools) then I’d agree, no point in buying foam inserts.
From what I’ve read, foamed toolboxes came from the aviation industry. It confirmed the presence of all the engineers tools, so nothing was left behind to cause possible damage, which could be catastrophic.
@@cerealkiller4248 couldn’t have said it better myself 👌
We didn't use foam in the Forces but we had shadow boards which as you describe instantly highlights a tool is in use. Each engineering tech had numbered tags which where put on a pin next to a tool taken to an aircraft. Certainly ensured you knew exactly where the tools where at all times!