Westfalia luggage rack and frame install | Building our dream VW Vanagon / T3 | Pop Top - Part 3
Vložit
- čas přidán 27. 08. 2024
- This is a series in which we convert our yellow Volkswagen T3 Sunny to our dream camper van. Follow us as we work on the engine, the interior and as we even swap our tin top to a pop top!
In this part of the conversion, we'll get to installing the luggage rack that comes with the pop top. As a side project, we're finalizing the riveting frame for the roof cutout. For that, we get a little help from Arjen.
----
Part one of the pop top: • We cut a hole in our r...
The start of our journey: • Swapping Seats and Gai...
----
You can now buy our awesome print as t-shirts to support our journey! ✨
Available in two colours.😎
Shop them here! Which one do you prefer?
sunnyadvanture...
----
Follow us on instagram! www.instagram....
----
Ready for the full van build? Subscribe now! 🔧 - Auta a dopravní prostředky
This helped me install my luggage rack
Nice work, I've done the same on my T3.
One tip regarding the removal of old paint from the frame (or from metal in general): There is a tool called "Reinigungsscheibe" in german (f.e. the product xt pro from 3M) which works like a charm to bring blank metal to the surface. Keep up the good work 👍
Thanks! We will definitely check out that tool for next time! 😄
Looking good so far ☺
Nice and simple. Congrats!
Do not forget to put the rubber washers under the 4 bolts of the tray. The brackets are sealed with teroson.
Thanks for the tip! We still need to look into the best way to seal all the holes we drilled all around. But I'll definitely look up Teroson :)
@@sunnyadvantures teroson RB2759, you can also use sika flex but it is glue. RB is sealant and can be removed.
🥰😍🤩❤️👌💪👍😁
😊🤩