Thank god someone with common sense. Thanks man. Everyone was posting it without a full charge and turning it on and i thought it was weak. Now I know they’re not too bad
@@oskr05k look at how you’re intentionally forcing the lever. Duh. That’s going to happen. Just move the lever slowly or slightly loosen the lever screw for smoother fluidity. Now you could have a faulty clipper. It’s possible. If you send them to Andis they’ll replace them or fix the issue free of charge.
awesome video ! I noticed the blade on this black reVite is the same as Andis Envy Li fade blade and I assuming the Andis Alloy Pro blade is on the the other Revite blade.
Just did comparisons. You just may be correct. 👍 So… if one has a blade only issue then that’ll likely be the first option ($22) as opposed to buying the specific replacement blades for ($50). Just a thought 💭
They perform well....No frills... so I chose not do a cut video at the time of making this video. I used them on a client during a phone call and they weren't as loudly annoying as other Andis clippers...Hope that helps?
😂I can hardly see how a video of them in use is going to convince anyone to buy them. Just sayin. Most of my clientele aren’t likely to be open to me doing that unfortunately. Definitely gotta respect their privacy 😉
@@petelikes you would be surprised . A lot of barbers do comparison videos of one clipper on one side and another on the other side and discuss the different nuances between the two. It makes for an interesting video.
Can you put on the other andis detachables like a bgrc. I’d literally only use these forever if they could use detachable blades and an adjustable in one clipper.
So the taper blade for the Revite is supposed to open up to a 1. When I compare it to the Andis master it actually looks like it doesn’t open up as much. What are your thoughts?
There is no real definitive size to clipper blade settings. It’s more of a guesstimate I’d say. Taper blades and fade blades open differently depending on how they’re adjusted.
Don’t think so and wouldn’t try it my friend. Even if it was possible that particular blade’s weight would offset the clipper which is already light weight. Why would you want to make it heavier?
If you’re going to spend the money on the clippers why not buy the single magnetic guards and stop modifying the clippers? Tampering with the ReVites are somewhat pointless. Just sayin.
The rotary motor in the masters are programmed to run full speed in order to provide the power. Unfortunately that’s going to make a bit louder noise. Hopefully as technology gets better this will change. For now the only choice for a quieter Master clipper is an electric one 😏
These aren't as loud and as costly as the Master cordless. As far as clipper prices goes, unfortunately 'us' the consumer have set the standards for prices. Now we have to expect "Professional" corded clippers to cost around $100+ and Pro cordless from $160-$299. I know..... it sucks.
I’m asking, because I just bought the snap fx trimmer and clipper, and my plug was telling me these are coming out, other than the switching blades, what is the benefit of buying them?
@@ricardobrooks4337 the BabylIss snap fx are ok products. I dont see why you would want or need these after making that purchase. If you’re not interested in spending more money to buy more clippers I’d suggest you go with your instincts. For myself personally, I only get the clippers that I feel will improve my workflow. There have been a few I’ve purchased and sold that I didnt care for. Babyliss has some I like and Andis has some I dont care for. I say get whatever you’re comfortable with my friend 😉👍
@@ricardobrooks4337 Andis Masters are always going to be their top of the line clipper. Anything else they manufacture will only and always be secondary.
Was hoping it brought a charging standing doc but doesn’t, it brings one blade, you gonna have to purchase the second blade separately that’s $50 extra and once the charging doc comes out you are looking at $300 plus dollars. Well done Andis not for the ppl.
Pretty sure Andis is just trying to keep the price point within reason by offering a less expensive clipper. It cannot compete with a Master Cordless so I personally would use this as a secondary clipper. Its much lighter, ergonomic and cuts nicely. No negative complaints here......yet.
You can order them from about anywhere online if you can’t find them at your local beauty supply. If it’s a problem they’re probably on back order. Remember Andis shipments come in from China so because of supply chain it may take a bit longer if you’re having trouble getting them. Be patient. They’ll eventually be everywhere soon.
No because of the less powerful motor but they do go through hair well and are lighter than the Masters. Remember it’s ultimately the barber who makes the cut look good 😉
All Andis clippers cut good but nothing compares to the Masters speed and performance. Can you complete a haircut with these and only these…. Yes. But not with the workhorse power of the Andis Masters. As far as the blade adjustment, it will depend on rather you get the white pair which features the taper blade (000-1) or black with the fade blade (00000-000).
@@petelikes dang man. Andis let us down. This is their 100 year anniversary. You’d think they would have used this technology to upgrade the Masters. Smh
@@demodemo9698 better battery and quieter would do it. Had to send a pair to Andis for battery replacement outside the warranty. I will assess the Master batteries will need replacement within 1- 2 yrs. Depending on usage.
@@demodemo9698 can’t quiet those pivot motors bro. They’re all a bit noisy. Andis places a thin foam sound dampening sheet and metal housing to make it as quiet as possible in the masters. These are quieter because of the less powerful rotary motor. Good torque in these rotary motors so that’s a good thing I guess.
I bought mine a month ago.....I was so ready.....the clippers are a disappointment. I have the black ones with both taper and fade blades. I wish I had my $219 back. Guess I will keep using my babyliss and wahls seniors😑😥
I guess it’s a matter of opinion. I think the Revite is an good optional clipper to have because it’s lightweight and less fatiguing than heavier clippers. That was likely Andis intent when they crafted it. It is not a cordless Master. One shouldn’t expect it to be as miraculous a clipper. Babyliss and Wahl senior are just as efficient. So as stated it’s all a matter of preference my friend. 👍🏽
@@formallyjacobs true Wahl Seniors are been tried and true and they have not gotten crazy with their cordless clipper prices....yet. Unfortunately brands are averaging $200+ for their clippers now. But we're buying them and they're gonna keep those high prices because of it😝 Maybe when we stop getting caught up in the hype of owning the newest products these brands will ease up? Just laughing at the barbers who bragged about owning 2 pair. You at least did the rational thing by getting the other blade instead of spending another $200. Look on the bright side... I'm sure you made your money back?
Thank god someone with common sense. Thanks man. Everyone was posting it without a full charge and turning it on and i thought it was weak. Now I know they’re not too bad
Oh they’re worth having a pair. And buying the optional blade whenever it becomes available.
Best review out so far finally thanks
Thanks 🙏🏽
Only review out 😂
@@cdblends2514 just trying to make it easy for people like us to decide if it’s worth the purchase…. I’d say yes. Andis should cut us a check 🤣
Truthfully, being a barber, buying clippers are not only a write off but an investment in your craft.
Absolutely! I agree 1000%
Great review brotha!
Thanks bro
First real review
Which is exactly why I posted. Thankyou
Solid review 👍🏽
Thanks.
Great review. ! I’m waiting on mine !
Hope you like them. I do
Bro. I can’t even use them on a client. The blade pops off when I use the lever n the clipper on. Check out the short I just Made for it
@@oskr05k look at how you’re intentionally forcing the lever. Duh. That’s going to happen. Just move the lever slowly or slightly loosen the lever screw for smoother fluidity. Now you could have a faulty clipper. It’s possible. If you send them to Andis they’ll replace them or fix the issue free of charge.
reminds me of the Andes trimmers they have back then corded that you can detach the T blade and put on the shaver
I had that flop
Great review ❗⭐ thanks for sharing 🔥
🙏🏽😉
awesome video ! I noticed the blade on this black reVite is the same as Andis Envy Li fade blade and I assuming the Andis Alloy Pro blade is on the the other Revite blade.
Just did comparisons. You just may be correct. 👍 So… if one has a blade only issue then that’ll likely be the first option ($22) as opposed to buying the specific replacement blades for ($50). Just a thought 💭
Those look nice
Doing a hair cut with them to see how they perform would have been nice.
😂
They perform well....No frills... so I chose not do a cut video at the time of making this video. I used them on a client during a phone call and they weren't as loudly annoying as other Andis clippers...Hope that helps?
@@petelikes nope. We want video lol
😂I can hardly see how a video of them in use is going to convince anyone to buy them. Just sayin. Most of my clientele aren’t likely to be open to me doing that unfortunately. Definitely gotta respect their privacy 😉
@@petelikes you would be surprised . A lot of barbers do comparison videos of one clipper on one side and another on the other side and discuss the different nuances between the two. It makes for an interesting video.
I love the master
Can you put on the other andis detachables like a bgrc. I’d literally only use these forever if they could use detachable blades and an adjustable in one clipper.
Unfortunately no. They only have 2 blades for the ReVite. Fade and taper blades
So the taper blade for the Revite is supposed to open up to a 1. When I compare it to the Andis master it actually looks like it doesn’t open up as much. What are your thoughts?
There is no real definitive size to clipper blade settings. It’s more of a guesstimate I’d say. Taper blades and fade blades open differently depending on how they’re adjusted.
Do you think the top phat master blade can fit on that step up?
Don’t think so and wouldn’t try it my friend. Even if it was possible that particular blade’s weight would offset the clipper which is already light weight. Why would you want to make it heavier?
What about Double magnetic guards bro? Tnx. Great preview
No not double but the single magnetic guards do.
Bet I have both
You can mode it to accept double magnetic guards
If you’re going to spend the money on the clippers why not buy the single magnetic guards and stop modifying the clippers? Tampering with the ReVites are somewhat pointless. Just sayin.
Why the Masters sound like they in pain 🤣 all jokes aside I appreciate the comparison 🙏🏽
The rotary motor in the masters are programmed to run full speed in order to provide the power. Unfortunately that’s going to make a bit louder noise. Hopefully as technology gets better this will change. For now the only choice for a quieter Master clipper is an electric one 😏
Does it have masters crunch sound?
No crunch sound like the Masters because it doesn't have the more powerful cut rotations of the Masters cordless.
They open as much as the masters?
These blades are fade blades so no. They're adjustment isn't as open as Masters' taper blade.
There’s a lot of barber reviews saying they pop off during cuts ouch !!!
I personally have not had that issue
Good review but I m over andis loud ass clippers for outrageous prices
These aren't as loud and as costly as the Master cordless. As far as clipper prices goes, unfortunately 'us' the consumer have set the standards for prices. Now we have to expect "Professional" corded clippers to cost around $100+ and Pro cordless from $160-$299. I know..... it sucks.
Would you say this would replace the cordless masters?
Absolutely NOT!!! Andis Masters are a workhorse of a clipper. Definitely not replaceable.
I’m asking, because I just bought the snap fx trimmer and clipper, and my plug was telling me these are coming out, other than the switching blades, what is the benefit of buying them?
@@ricardobrooks4337 the BabylIss snap fx are ok products. I dont see why you would want or need these after making that purchase. If you’re not interested in spending more money to buy more clippers I’d suggest you go with your instincts. For myself personally, I only get the clippers that I feel will improve my workflow. There have been a few I’ve purchased and sold that I didnt care for. Babyliss has some I like and Andis has some I dont care for. I say get whatever you’re comfortable with my friend 😉👍
@@petelikes you are right, I was under the impression they would replace the masters, but, I’m good now
@@ricardobrooks4337 Andis Masters are always going to be their top of the line clipper. Anything else they manufacture will only and always be secondary.
Sound like the slim line pros
But much more powerful 💪🏽
Was hoping it brought a charging standing doc but doesn’t, it brings one blade, you gonna have to purchase the second blade separately that’s $50 extra and once the charging doc comes out you are looking at $300 plus dollars. Well done Andis not for the ppl.
Pretty sure Andis is just trying to keep the price point within reason by offering a less expensive clipper. It cannot compete with a Master Cordless so I personally would use this as a secondary clipper. Its much lighter, ergonomic and cuts nicely. No negative complaints here......yet.
How do they cut?
They cut well. Masters bulk cut is better but the Revites will still give an amazing cut. Remember the motor isn't as fast as the Masters.
Where u get that from?
You can order them from about anywhere online if you can’t find them at your local beauty supply. If it’s a problem they’re probably on back order. Remember Andis shipments come in from China so because of supply chain it may take a bit longer if you’re having trouble getting them. Be patient. They’ll eventually be everywhere soon.
Do these cut like masters?
No because of the less powerful motor but they do go through hair well and are lighter than the Masters. Remember it’s ultimately the barber who makes the cut look good 😉
@@petelikes Mos def 👍🏽
Do they cut like masters
And do they open to a 1
All Andis clippers cut good but nothing compares to the Masters speed and performance. Can you complete a haircut with these and only these…. Yes. But not with the workhorse power of the Andis Masters. As far as the blade adjustment, it will depend on rather you get the white pair which features the taper blade (000-1) or black with the fade blade (00000-000).
Crunch sound like the Masters? 🔥
NO crunch. less revolutions in the motor. They perform well though. Not as aggressive as the Master so I wouldn't recommend bulk cutting with these.
@@petelikes dang man. Andis let us down. This is their 100 year anniversary. You’d think they would have used this technology to upgrade the Masters. Smh
@@demodemo9698 better battery and quieter would do it. Had to send a pair to Andis for battery replacement outside the warranty. I will assess the Master batteries will need replacement within 1- 2 yrs. Depending on usage.
@@petelikes damn that sucks man. You should make a video on how to make them quieter. Haven’t bought one yet. Been waiting for a new drop
@@demodemo9698 can’t quiet those pivot motors bro. They’re all a bit noisy. Andis places a thin foam sound dampening sheet and metal housing to make it as quiet as possible in the masters. These are quieter because of the less powerful rotary motor. Good torque in these rotary motors so that’s a good thing I guess.
Andis must hate charging docks 😵💫
I just think Andis is just trying to keep the price point down on the revite. Docks are cool but aren’t necessary
I bought mine a month ago.....I was so ready.....the clippers are a disappointment. I have the black ones with both taper and fade blades. I wish I had my $219 back. Guess I will keep using my babyliss and wahls seniors😑😥
I guess it’s a matter of opinion. I think the Revite is an good optional clipper to have because it’s lightweight and less fatiguing than heavier clippers. That was likely Andis intent when they crafted it. It is not a cordless Master. One shouldn’t expect it to be as miraculous a clipper. Babyliss and Wahl senior are just as efficient. So as stated it’s all a matter of preference my friend. 👍🏽
@@petelikes for 200 buck yes I expected it to be a clipper on the lines with babyliss.My wahls seniors cut a lot better and way less expensive.
@@formallyjacobs true Wahl Seniors are been tried and true and they have not gotten crazy with their cordless clipper prices....yet. Unfortunately brands are averaging $200+ for their clippers now. But we're buying them and they're gonna keep those high prices because of it😝 Maybe when we stop getting caught up in the hype of owning the newest products these brands will ease up? Just laughing at the barbers who bragged about owning 2 pair. You at least did the rational thing by getting the other blade instead of spending another $200. Look on the bright side... I'm sure you made your money back?
I love Andis clippers, but why do they all have to sound like weed eaters
Lol IKR !?!
Seem like a no imo
So f__king loud
Gotta expect it from these rotary motors if you want that power 😣
Hey good brother what is your IG ?
Had to take a break to revamp the content.
@@petelikes just wanted to give you a heads up you can put a ceramic blade on that and you can put a Wahl still blade also
Oh, ok…. But why would I want to put a Wahl blade on an Andis clipper??? These blade that come on it are perfectly fine. 😉Just sayin.
@@petelikes or you could put any Andis Envy blade or Andis pro alloy blade top and bottom
@@junebug8808jec but why would I want to tamper with the warranty? Again…. Just sayin😉