Argon ONE V2 M.2 SATA SSD Raspberry Pi 4 Case: Full Setup Guide

In this video we will checkout the Argon One M.2 SATA Raspberry Pi 4 case. This impressive case provides both passive and active cooling and can automatically adjust the fan speed as the CPU temperature rises. The timing when the fans kick-in are adjustable using their configuration script.
May not need the external enclosure shown ( see this video for another option, link below skips to the relevant section ): • NESPi 4 Cart Shell, Ar...
To help you even more with your Argon One M.2 Raspberry Pi 4 case, I've setup an Argon One page which you may find here: wagnerstechtalk.com/argonone
Chapters
========
00:00 - Introduction
00:29 - Unboxing
02:07 - Assembly
06:13 - First Boot
09:02 - M.2 SSD Enclosure
10:38 - Important Stuff
Items Shown in this video
=====================
* Argon ONE M.2 Case for Raspberry Pi 4 (Argon M.2 CASE ONLY) | SATA SSD Support | B-Key and B+M Key Compatible: amzn.to/3pI4V8L
* Argon ONE M.2 Raspberry Pi SSD Board (M.2 Expansion Board ONLY): amzn.to/3ke9JBE
* Argon ONE Raspberry Power Supply 18 Watts 5.25 Volts 3.5 Amps (USB-C) Power Adapter: amzn.to/2Snl0FR
* Raspberry Pi Official Keyboard and Mouse Value Pack (U.S. Version Red/White): amzn.to/3pLuy8x
* Samsung 860 EVO SSD 500GB - M.2 SATA Internal Solid State Drive: amzn.to/2ZKMtS8
* SSK Aluminum USB 3.1 to M.2 NGFF SSD Enclosure Adapter: amzn.to/3dGmByX
Software Used
============
* Raspberry Pi Imager: www.raspberrypi.org/software
* BerryBoot: www.berryterminal.com/doku.ph...
Videos Referenced
===============
* Boot multiple OSs from an SSD with BerryBoot on a Raspberry Pi 4/400: • Boot multiple OSs from...
* Recalbox 7.1 Install on a Raspberry Pi 4: • Recalbox Setup on a Ra...
* RetroPie 4.6 Install on a Raspberry Pi 4 : • RetroPie 4.6 Setup on ...
* 10 RetroPie Setup TIPs in 20 minutes for your Raspberry Pi 4: • 10 RetroPie Setup Tips...
COMMAND USED
=-=-=-=-=-=-=-=-=-
*NOTE: A simple way to copy/paste these commands to your Pi4 is to load up this page wagnerstechtalk.com/argonone and copy/paste the commands from there or from below.
Download/install the Argon One Software on the Pi 4 :
curl download.argon40.com/argon1.sh | bash
For Stress Testing (Download stress):
sudo apt-get install stress
(run stress for 15 min. and report the temperature to the terminal)
while true; do vcgencmd measure_clock arm; vcgencmd measure_temp; sleep 10; done& stress -c 4 -t 900s
If you found this video helpful/informative, please ...
**** Like / Share and Subscribe ****
I
*As an Amazon Associate I earn from qualifying purchases.
→→ wagnerstechtalk.com ←←
SUBSCRIBE for the latest TechTalk: czcams.com/users/wagnerstechta...
----------------------------------------------------------------------------------------------------------------------
Feel free to ask us a question in the comments below or visit our website, we try to answer most questions that we can.
Email: [e-mail]
Website: wagnerstechtalk.com
Or join us on one of the following social media sites...
Facebook: / wagnerstechtalk
Twitter: / wagnerstechtalk