Sleep to me sawing this 28” Poplar Log #7

Sdílet
Vložit
  • čas přidán 31. 01. 2024
  • What’s up CZcams!! It’s just sawing today. This is 4/4 Poplar. Please like today’s video and hit that subscribe button.
  • Věda a technologie

Komentáře • 51

  • @arkansas1336
    @arkansas1336 Před 4 měsíci +2

    Great sawing, lumber looks great. Thanks for the video.

  • @PineInTheAshMilling
    @PineInTheAshMilling Před 4 měsíci +2

    Some really nice looking poplar, excellent video, just love that mill.

  • @rogerhodges7656
    @rogerhodges7656 Před 4 měsíci +2

    You are cutting some beautiful poplar!

  • @dailrharris9009
    @dailrharris9009 Před 4 měsíci +2

    Really nice poplar! Sawed for 50 yrs, lusted after vert edger and lasers. Did get lasers a few yrs before I retired. ...... By the way my antique Belsaw wont saw that fast , or that big, still fun tho

  • @woodnewf3847
    @woodnewf3847 Před 4 měsíci +2

    Some impressive logs. Cranking out board feet.
    Fun to watch. Thanks.

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci +1

      Incoming!! And I honestly I have to take it a little easy when I know the camera is going to

  • @bennymiller680
    @bennymiller680 Před 4 měsíci +2

    Nice setup you have there and very efficient.

  • @deniscarter6613
    @deniscarter6613 Před 4 měsíci +1

    It's great to see you using the circular sawmill not too many left here in Ireland

  • @Helmsburgsawmill
    @Helmsburgsawmill  Před 4 měsíci +2

    The subscribers who are interactive and kind, just know I remember you and I remember your comments:) I will remember you when the time comes

  • @lyleharkness-rv5vf
    @lyleharkness-rv5vf Před 3 měsíci +1

    New subscriber. You have an incredible set up. I worked at, years ago, a saw mill where we used the the old circular head mill to build the new building around the sawmill and then switched it over to a bandmill. Loved the work.

  • @davidhouser586
    @davidhouser586 Před 4 měsíci

    The big boy turned out some great pieces even the heart looked nice all the way through its a mystery until you open it up. 😀👍

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci

      So I kind of already knew it was going to be like that😅 just so you know, I’m sure there’s dozens of 30+ inch butt logs in those piles. And those ones are will have better inner quality😉

  • @davidleonard484
    @davidleonard484 Před 4 měsíci +1

    I love watching you saw lumber!

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci +1

      I really appreciate that sir! It’s only going to get better

    • @davidleonard484
      @davidleonard484 Před 4 měsíci

      I wish I could get a hold of some of that dark green colored poplar to make a few calls. It's kinda hard to get around here.​@@Helmsburgsawmill

  • @DavidPadusnak
    @DavidPadusnak Před 4 měsíci +1

    Amazing mill! good video, would like a little better sound.

  • @BobBauguess
    @BobBauguess Před 4 měsíci +1

    That is amazing that you get poplar logs that large that are not wind shook

  • @robertgreen8695
    @robertgreen8695 Před 4 měsíci +3

    How is your grandfather doing by the way? The family of your late friend is still on my mind and in my prayers. American Indian Healing Prayer
    Mother, sing me a song
    that will ease my pain,
    mend broken bones,
    bring wholeness again.
    Catch my babies
    when they are born,
    sing my death song,
    teach me how to mourn.
    Show me the Medicine.
    of the healing herbs,
    the value of spirit,
    the way I can serve.
    Mother, heal my heart
    so that I can see
    the gifts of yours
    that can live through me.

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci

      Thank you for that! I’m sure others will enjoy reading this as well. And he is doing great:) he’s already getting the garden ready for the spring😂

  • @Jeff-vs8rl
    @Jeff-vs8rl Před 4 měsíci

    It wont take long to have the load of Poplar ready to go with that hungry mill. It says feed me😂

  • @joestone2068
    @joestone2068 Před 4 měsíci

    Love this edger set up that is really cool.
    What is the popular used for?

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci +1

      That 4/4 Poplar is all getting shipped off, and will be turned into flooring, paneling, furniture, shelves, etc.

  • @cecillasiter3260
    @cecillasiter3260 Před 4 měsíci +1

    That one log produced a lot of very nice lumber. What are the thick pieces at the last cut used for?

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci +2

      So by our standard that’s the lowest quality part in the log. They get shipped off and re sawn into pallets

  • @tomwaymire-yw9vb
    @tomwaymire-yw9vb Před 3 měsíci +1

    Hello. Newby here. When you cut out a 1 x 4 and the board falls on belt with the 2 scrap top and bottom pieces. Does someone pull out good board and the scraps go on be be scrapped or is that some how automated? Thanks.

    • @tomwaymire-yw9vb
      @tomwaymire-yw9vb Před 3 měsíci +1

      Oh nevermind I started from your first video and made it to "crew working on 20 footers" and found my answer. I will watch all videos before I ask again. Thanks. Tom.

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 3 měsíci

      It’s okay😂😂 thank you for watching sir. I really appreciate it

  • @pierronreasner6840
    @pierronreasner6840 Před 4 měsíci +1

    The mill seems to be working faster

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci

      I have the saw cutting better and I’m in a softer hardwood;) It’s all manual

  • @rollierl
    @rollierl Před 4 měsíci +1

    Watching the saw work with the top saw does the top saw retract or is it stationary?

  • @Jeff-Lynn
    @Jeff-Lynn Před 2 měsíci +1

  • @kevinhonaker9468
    @kevinhonaker9468 Před 4 měsíci +1

    Where is your mill located?

  • @robintaylor-mockingeemill8223
    @robintaylor-mockingeemill8223 Před 4 měsíci +1

    What are the big poplar timbers used for ?

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci +1

      Those are just cants which are the lower quality items. They’ll be re sawn and turned into pallets. However will find logs to saw the quality timbers with. You should look for my cabin video. It’s a great example

  • @marsudiantom1681
    @marsudiantom1681 Před 4 měsíci +1

    Do it👉 😎🇮🇩

  • @charlesnicholson9625
    @charlesnicholson9625 Před 3 měsíci +1

    How many board feet do you average a day?

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 3 měsíci

      It just depends! The size of timber really dictates that! But big 12-14 ft logs, 10-12 thousand ft per day

  • @zeusbottom
    @zeusbottom Před 4 měsíci +1

    Woot the hydraulics got fixed! 🪚🪚🪚

  • @Helmsburgsawmill
    @Helmsburgsawmill  Před 4 měsíci

    Also play this to fall asleep! Please comment back how it does for you

  • @robertgreen8695
    @robertgreen8695 Před 4 měsíci

    Is the poplar wood coming from an area that is being monitored and replanted as required by the BLM?

  • @user-lf1bt6qm3h
    @user-lf1bt6qm3h Před 4 měsíci +1

    Man that think it's eating like cotton candy, is that a new saw?

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci

      Nope!! It’s actually something that’s not going to make a lot of sense. Those teeth are almost done. Which means they’re as narrow as they can be. The tooth curf will become the same thickness as the saw. However, that’s when you can cut the fastest;) all that motors power is applied to a narrower saw curf, therefore you can go faster and faster up until the teeth are done!!

    • @Helmsburgsawmill
      @Helmsburgsawmill  Před 4 měsíci

      And I’m also in a lighter hardwood called Poplar

    • @user-lf1bt6qm3h
      @user-lf1bt6qm3h Před 4 měsíci

      How in the he'll did you manege that!? I mean you're as busy as it gets , not yo mention you're dad trying to find parts , I mean wat the he'll brother you need need to breathe like anyone else!!! He'll im starting to like you more lol

  • @markmessner4554
    @markmessner4554 Před 4 měsíci

    The camera angle is too straight in line with the saw for too much