Video není dostupné.
Omlouváme se.
Plowing Snow With Meyer Diamond Edge 7.5' Plow and Ford F-250
Vložit
- čas přidán 20. 02. 2018
- Did some snow plowing with the -03 F-250 and Meyer snow plow, had about 8 inches of new snow to clean up with more accumulation forecasted in the next few days.
Thank you so much for lifting the blade as you push into the bank. I've seen so many videos of people who don't 'stack' the snow when they get into the bank. Nice to see someone doing it right.
that's a nice setup... I wanted to get one of those plows 7 years ago... thanks for sharing
Very nice fluffy snow here you did a good job
This brings back memories when I had a good old 'shortie' GMC 4 -WD pickup with a 350CID and a 7' Fisher Snow Plow on. Man, that could push snow too.
I like how this one connects to your truck., it does so with a breeze.
Nice video.
If you paint the back of your plow primer black it will cut down significantly on glare. I've been plowing for years and this is to help tremendously
That's some deep light snow!
If we got snow like that up here that didn't blow in and drift I probably wouldn't hate winter as much as I do!
Never know when you might need to get your plow and tumble bug to do some scraping and plowing! 😀
Great video , and great tip about creeping in to an old snow pile slowly. I see too many dudes ramming than they wonder why there stuff breaks.
Meyer Diamond is an interesting plow... Looks like a Fisher style trip-edge and mount.
Fine job, fine rig but I was expecting that! Saves a lot of scooting around. A helpful neighbor scooped what little snow we had and a lot of rock off the road. Some help. Maybe I can drag it back in this spring. Maple bud clusters big as nickels but we're due a deep freeze BUT when it quits raining I've got high spots to mow. Tis the season! Thanks, Buddy and hope that thumb is better!
I feel for you and the thumb but it's better to bleed it out for sure. And that's a fine way to work deep snow.. If the guy had just left ours along it'd been gone in no time because there wasn't much of it but instead of letting the sun do the work he tried to get every flake and can't run a skid steer to start with. It's in yards and pushed over culverts where it melted out. It's a mess but I'll try and at least make it look a little better a little later. And that plow hitch is a trick but it's also like you said, you got to Watch What YOu're DOing because one miss lick and the $$$ would go flying. Good running truck but I know how you are. I try hard myself. Take care, Pal!
I have an old western snowplow with a joystick its been 15 years since it ran and the 1960s ford with it and thanks for the tips for when it snows again
I’m glad I have North Dakota between me and those cold Minnesota winters. :)
It's only 25 below zero here in Minnesota tonight with a 50 below wind-chill.🥶
Great vid
nothing beats sitting on the tractor seat moving snow. alas I have gotten soft in my old age. I bought a bobcat and snow blower last fall. now my 4 hrs of seat time is down to less than 1
I got a western uni mount for my truck. I would have burned 1/2 tank tho gotta love that V10! Lol
worst part of snowplowing is the gas. My 1986 K30 has a 454 in it and oh my god you'd think you had a hole in the gas tank.
You do a terrific job with that straight blade!
Good day BOY you still have alot of snow Here in Ont.Canada, we have severe flooding. Yea pushing snow would be hard on gas. Thanks for now
Yes Don, I heard about the state of emergency being declared for the rising Grand River. That's tough man! Stay safe brother.
we need snow!
Mighty Moe Excavating likes the snow! Does the speedo actually work while reversing? Ty for the entertainment
nice video thx alot... dam was is it always the drivers side wiper lol
# why is it always the drivers side wiper lol
Something wrong here. I'm two hours north of you on the Canadian side of the Rainy River, You have more snow than we have?
What's up with that? I've got a new Western plow on a 2016 F150, you don't get fuel millage when snowplowing, doesn't matter what your driving. I put a 4" piece of rubber belting on the plow, keeps the truck hood cleaner, should have used 6" belting.
Keep smiling.
nice rig man.. i have a 2002 f 350 7.3 western pro,, nice. i also was watching you steer and back hand shift with left hand , i was doing the same thing till i ran a buddys truck with plow controls on left side of wheel ( driver door side), i was a little awkward at first (being rt handed), but once you get used to it , its great ,run plow with left and steer /shift with right ,then its also easier if you need hang out window to spot objects ,give it a try,,you will thank me later ,to each its own tho ..plow on bro, ,, regards scn
I love plowing in my stick shift 7.3s better then my auto 7.3 and auto 6.0
I sold my older truck and purchased new F350 wonder if I should purchase fisher or Myers. Mostly being used on gravel road. I’m running out of time it’s the end of August now. You really did a good job on plowing thanks.
Fisher or Western.
@@oby-1607 fisher and western along with snoex are made by the same company Douglas Dynamics
If you plow gravel or dirt roads try putting roundstock the length of the plow and have 2 posts welded to the the roundstock so you can mount it where the "shoes" or "feet" would Normally go and use washers to adjust the height, it cleans awesome, smooth and doesn't dig in or tear anything up.
@@Terk131 I purchased the fisher HDX plus purchased the shoe kit. Fisher new shoe kit is not round they don’t use the washer system to adjust the height. New system for HDX bolt on has adjustable by using pins. You have about 6 adjusting wholes. Only used my plow only 3 times now as of 1/9/21. It’s really easy installing the plow on & off.
Where is your rubber flap on the front top of your blade. Mine is 10 inches wide and full length across. Sure helps keep the snow off of the windshield. Nice video.
Can you do more plowing videos
I wish I could plow so slow...just not a option when your trying to make money
Your gas mileage would go up if you added in backing miles covered.
Thanks for the great reply. I'm 76 and back in the 50's car dealers would just hook up a cable to the odometer and spin it backwards. That worked until cars came with a small wire that would scratch the numbers if they were turned backwards. I'm a mopar guy but won't hold it against you for liking Fords. I also enjoy your vids.
Good job. Do you have the 5.4L gas in the Superduty?
@@squatch253 Oh yeah-the V10 is a monster. Likes gas too.😁