Is there a maintenence mode u need to put the vehicle in? Can I just compress the brake caliper pistons without worrying about the back flow ruining seals? Thank you take care!
Front Brakes nothing is needed. On the Rear though you would need to set the Parking Brake Actuators to Open Zero Position with a Scanner or otherwise you will not be able to open them to replace the brake pads and rotors. Thanks 👍
Hi, can you give me a little help? I have a 2007 bmw 750li, and i have replaced my rotors and breaks all around the car, but when I was opening de calipers pads break oil start liking like on the middle passenger side under the car, and now when I step on the breaks, breaks go down to the floor, I have to pumped 2 or 3 times so the car can stop, what will you recommend me todo to get it fix? Thank you, an advanced, best regards.
You have air in the system most likely! You need to get someone to help you bleed the vehicle completely at the bleed valves on each brake caliper and see if this fixes the problem. On person pumps the brakes and holds while the other one bleeds the calipers. Starting from Rear Righ, Rear Left , Front Right and lastly Front Left calipers. You may want to see first where this leak is coming from because you may have on the lines under the car being rusted or broken and this is why it has started to leak. So check and inspect first before bleeding... Thanks hopefully this helps... Write again if you have other questions... Thanks 🙏
The comments about "Rubber Shits" was a what you dont see at a mechanic shop moment....hilarious, great video!!!
Haha 😂 Love it! Thanks for the support! 👍
best let me teach you how to do it video ever!
💯🤞💪👍
Watched video to see how you dealt with the spring clip on the front of caliper. I had similar issues. Very annoying to get on. 😂
Yeap 💯 💪 👍
Thanks for the video brother!
Glad to help!
Is there a maintenence mode u need to put the vehicle in? Can I just compress the brake caliper pistons without worrying about the back flow ruining seals? Thank you take care!
Front Brakes nothing is needed. On the Rear though you would need to set the Parking Brake Actuators to Open Zero Position with a Scanner or otherwise you will not be able to open them to replace the brake pads and rotors. Thanks 👍
@@projectathos awesome. Thank you!! 🙌
Hi, can you give me a little help? I have a 2007 bmw 750li, and i have replaced my rotors and breaks all around the car, but when I was opening de calipers pads break oil start liking like on the middle passenger side under the car, and now when I step on the breaks, breaks go down to the floor, I have to pumped 2 or 3 times so the car can stop, what will you recommend me todo to get it fix? Thank you, an advanced, best regards.
You have air in the system most likely! You need to get someone to help you bleed the vehicle completely at the bleed valves on each brake caliper and see if this fixes the problem. On person pumps the brakes and holds while the other one bleeds the calipers. Starting from Rear Righ, Rear Left , Front Right and lastly Front Left calipers. You may want to see first where this leak is coming from because you may have on the lines under the car being rusted or broken and this is why it has started to leak. So check and inspect first before bleeding... Thanks hopefully this helps... Write again if you have other questions... Thanks 🙏