TIG Stacking Metal | Laywire Root Pass + Hot & Fill In One Pass
Vložit
- čas přidán 10. 07. 2022
- Weld fast and stack the metal with Riley Reed. On tonights video @amishmafiafabworx shows us some TIG welding techniques that weld fast check out this 6" SCH 80 pipe, Root pass, hot pass + fill and cap.
#weldtube #southcoastweldingacademy #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en - Jak na to + styl
👇WeldTube Store👇
www.weldlife.com
was he wearing a northeast tech jacet?
Man, I love when Riley Reed teaches me how to lay pipe
🥴😂
😂
Lmao
😂😂😂
came here looking for this comment
Oh man I love Riley Reed… oh a different one than I’m use too..
Hahahahhaa I’m glad someone made this comment
😂😂😂
I had to.laugh for about 5 min I feel so bad
@@Yeoified What are all you nggas laughing about? I don't get it.
@@jayrod92 What is the mufckn joke?
I’m speechless! Work in a fab shop and have never seen this technique. I mainly MIG but now I want to try this. Awesome job!
Thanks!
This is a tig / gtaw welding use the argon gas.
Riley always teaches me the best technique
Really neat, and Great consistency from end to end. Thankyou.
Good to see some different free hand technique, it has its place. Ive reverted to it in tight spaces.
I have used this technique before on heavywall carbon and chrome. Just stacking metal like there is no tomorrow. Good job!!!
Is there a trick for the bottom on a fixed position?!! Cause I’ve tried it but no luck at the bottom.
@@josemurillo1039 I can only tell you take a cutting blade and open that root gap at the bottom. Always do what is necessary to ensure yourself that u are penetrating on bottom without getting suck back or lack of fusion and breaking down both edges. Open it up bro. Do what u know is best. Don't take extreme risks but never be afraid of your own skills
@@josemurillo1039 run a couple of passes between 5-7 and then do the rest like he does
Small hot pass in the bottom helps with the duck back doesn’t take much time and gives you some forgiveness.
gotcha down! Riley answered my question during the video, ty weldtube!
Thank You 🙏 Great Tutorial from Riley Reed. Appreciate it
one of the best on weld tube. great vid bro!! top notch talent
Best welding I’ve ever seen, cool as hell
Had a bunch of 8" schedule 40 rollouts come into the shop and I was trying to figure a way out to knock them out as quick as possible. Tried this technique and it worked amazingly. My heat preferences are a bit different but it got the job done all the same. I found 180-190 on my hot pass/fill was as high as I could go without the puddle becoming volatile and sloppy.
All machines and travel is different. But thank God u finished up.
Hi there good evening. It's already evening here in the Philippines around 10:33 pm I love watching your tutorials sir and I am a new subscriber and honestly I am learning a lot thanks for sharing it means a lot to me as a newbie Tig practitioners
Riley really showed us all something here!
I would like to see this technique on the bottom from 6 to 9 O'Clock instead of rolling it out
Yea same
I just said this out loud lol. Every video it's the easiest position. Most of us are coming to see the difficult stuff
true, waiting also for 6 to 9 cause in the field u cant rotate the fuckin pipe, this is just a controled environment
Yea every video can we get a 6
@@australiabuhayofw4402you can do it. But these guys just wanna show the best weld they can for the camera. You can still get pen on bottom though
Many thanks man. I've really been struggling with this wire on site
Purfect dude thanks for sharing this wonderful video.
Dude! I have been looking for more info about this technique since the "The Fastest Welding Technique?", after watching this vid it really puts all the pieces together, thanks!
You pay cheap for fast, you get cheap crap. Pay wage for quality and not quantity. You get respect and more work
really very good teaching. good luck
Good work,good quality.
Again bravo dude you just done something that needed to be done that’s how we do it get money brother
This dude is RUNNNIIINNGGGG true professional right here
Yeah, free handing is a must for well balanced versatile welder. I got a colleague who starts walking the cup even if asked to simply put a small tack
Maybe you should say it to him instead of on the internet.
@@jg8060maybe I should have, but we are no longer colleagues, plus we had no common language and had to communicate when needed through Google translator
Crazy skills, I just started welding. I wish I was that good!
youll get there - just pay attention to the weld pool. make sure the shape of it remains as close to a circle as possible- move the drop of water and try to make the outside edge remain a circle. That's it. 2G to 6G, sparks flying down your neck, fire everywhere, keep it a circle. Out in the field in a ditch in 2 feet of muddy water and cold, 6G, slight sense of electrocution in your arm--- KEEP IT A CIRCLE
Great video! Very well explained! Thank you sir for sharing
great info thanks
Sangat profesional dan terlatih
Trima kasih untuk semua ilmu dan pengalaman yang anda bagikan untuk saya sangat sangat bermanfaat
Thanks bro gonna use this technique Monday for my pipe class
So uhhhhhh how did it go? Did you try this root technique starting from the bottom at 6 o'clock?
Very good job
That guy is great wish I could tig weld like him..
RIELY good job that mate the free hand on the tig looks smart mate I done loads of tig work before but I always struggle on the cap
Really I like this man
Good job boss i am also do this weldeing .Nice teaching that .🤗
That is scary good!
Thank you brother!
Like a BOSS!
Muy buen colega buena presentación de esa junta en 5G gran trabajo
Awesome.
Never seen Riley reed get down with the pipe so well 😅
@weldtube where can I get the insulated tig Welding gloves you memtioned in the video?
I know it would pass x ray but would it pass tofd? (Time-of-flight diffraction)
Wat about the bottom does it correspond the same or is it another technique cause I know gravy plays a part
Great tutorial. I’m an old school free-hander.
More than one way to skin a cat!👌🏻👌🏻
Free hands...ihand and highhands bro..nice skills
skills!👌👍👍
Awesome video, I would of liked to see how the root looked using that technique though.
@7:27
Riley Reed welds too!? What's the rod of preferance?
Bro using gas like he worked in Auschwitz 😂, but those welds.....perfect
Hello there! I am also your colleague from the East. I have 16 years of experience in this field. my dream is to work in America in this field
nice welding. @:) ( Yes ... good jawb .. ) Greetings from Copenhagen Dinmarc .. just east of the big pudle lake.
Stop showing everyone our secrets Riley lol good to see u good job
Thanks buddy! Gotta keep making welders like us we’re dying breed!
Really wish you would’ve approached the weld in position . I want to learn how to bead like that without having to roll it. From 6-3 . Like do you put the torch in a different angle? Do you walk it fast towards you and lay wire? So many questions unanswered 🥲🥲
also! is that 70s-2? 3/32 and 1/8..thanks again - Bass
Perfect Cap
Can you show how to weld stainless pipe with this tigh gap on this videos
Hey Champ x danish vet here.. im welding. its so good. doing tig for like 3 years. Where Can I buy that handle you have got and do you use scratch start and or lift start for it ? I have a Kempi Welder machine.
Sick
Very well done and explained..Walking the cup is like the dessert after a good meal for me..
Do pipe fitters makes good money ? Tig welding ?
Mister mafia blessing
Hey brother I’m in Tulsa piece rate tig welder well done I’ve been wanting to make this video myself for awhile
where at in tulsa? im also doing some piece rate at the moment but their rates arent so good about $10/inch so on an 18" im getting $180 all 100% xray
Watching this makes me think I really enrolled in the wrong welding school in houston
Masha Allah, you have done a very nice job. God bless you brother
WPS Max interpass temp
: all of the temperatures
Fingers resting on the pipe: no more feeling in them 😂
Nice welding ol son
Is that a rocker rig?
What size tungsten
🔥
One problem I’m having is my root suckback on the hot pass if I run too hot. And I am trying to dump metal in it to cool it
Maybe going too slow on hot pass
Pause on your side walls more, and try and push your rod between steps. You probably pushing so much new metal in that it slows you down and you have to heat more to wet it out ond keep the tungsten I'm the wrong position. Practice with smaller filler rod and then push for fast welds that will pass
Wow i didnt know riley reid was a welder too!
Great techniqe. Reduces welding time at least for 30%
Damn all my pipe weld tests are fixed position.. Being able to rotate the pipe would make it a breeze.
Good
Use a 2.4mm filler rod and can really get some speed up on that root👌
Damn this dudes good
pretty good. a touch of undercut on the cap but other than that not bad.
is this a scratch start machine or pedal usage? TY ladies and gents and special guest Riley Reed from @weldtube
special shout out to the welders in oklahoma with it.
I like the welding very mucho .I want to learm tig welding
I am from D..R.
40 cfh?
#15 cup is Pyrex glass not ceramic.
That guy was good get him in there more
Thanks brother! I will be from time to time!
At 210amps how are u not cracking and cooking your cup... that's my issue.. I love welding hot but I go thru so many cups
Más videos en español por favor 🙏
Pretty sure I have cold rolled all my X-ray welds 😭 the edge was rolling over as I was feeding
Can i do this on stainless steel or is that to much heat input?
Not all stainless. Some are more workable than others but you don't wanna be running too fast or too hot on that white iron bro.
Wouldn’t recommend it on stainless, it needs to be kept a little cooler, but you can definitely speed it up a little and add more wire. Just lower Amps and smaller passes.
👍👍👍👍👍
Show us how to do that on the bottom of pipe . Gravity will fight you on the bottom and have a sucked back root
what bench vice is that you are using?
Y e a h
B u d d y !!!!!!
Can't lie, I'm not a shop welder. Feild guy myself. If you would of done this in a fix 6G position, then I would try. I run 70amp on 2" heavy wall and pass my gate test to wedding band and the checks keep cashing. Do this on the bottom side
You running cold there bro
it works on bottom side bro, I do it every day same technique
“THE ROOT GETS YOU PAYED AND THE CAP GETS YOU LAYED” 💪😎💵🤑
Works for 5g?
You don't purge the root from the inside ??
Carbon doesn’t need an inside purge. As far as I know only your alloys do to prevent sugaring
No purge needed on carbon unless you’re putting a stainless root in it.
I did this technique but ended up having a small flush ring in the pipe
Gotta push more rod, as long as you get a happy trail you know walls are broke down, flush is okay, as long as you don’t suck it back on your hot you’re golden. Hope that helps
Why always 3 to 1 oclock position?
Just for demo purposes and camera angles, if you’re going to do this in position a small hot pass helps
Is this technique good only for roll outs? I was waiting to see how he does it on the bottom with that root opening at that temperature.
Me too
Same. Show a position weld using this technique. Good technique here but I would say only for rollout.
Yes its mainly for rollout. We do the same thing at the shop i work for, but if we have to do an in position weld, I’ll open the root up like you normally would. You can still hot and flush it at the same time like he shows though, you just have to be way more careful about getting suck back on the bottom of the pipe.
He would need leather sleeves for that heat vs speed. Not to mention the suck-back on the root, fisheye in the arc break from bad tech, or arch marks from lack of experience and knowledge. Good for a shop welder, not a feild guy
I definitely have done this in position we mainly stayed in 1g for demo purposes and camera angles. However I do run a quick small hot pass in the pipe to help prevent suck back on the bottom, thanks for watching fellas
Make sure we get the spelling correct when we Google this guy
No pic of the rut🧐
7:27
That's easy because he's rolling it but try that in the pipe rack you won't penetrate the bottom of it plus you'll get under cut
yeah you can just use a little more heat so it keyholes then you can dab wire in on yhe bottom. once you hit 3-4 o’clock you can use this technique.
Is a really good technique to speed it up but I really think the cap is gonna b a little low need more meat and is to much risk on a lack of fusion when filling