We had a repairing video about how to fix the problem of Face ID set up failure by grinding the metal shield on the Face ID module before, but some fans left comments that grinding method would leave obvious traces on Face ID module, which is not good for repair shop recycling. Now we will solve this problem by using hot air gun and updated JC V1S machine.
Hi Dear, nice Video Thanks! i have a question, i have a this same problem (upper / lower) but after DOT test i get S,B,D,A abnormal but rest ist normal ( ICC, NTC ) what is the problem? and in dont see "Results" or "FUSED" message. Thank you so much
@@now6942 Hi, probably the power suply diode has been short-circuited, need use tin wire to connect it again. Pls check video from 2:35, connect it and test again.
@@Faiz_k_fk Face ID not working, depends on many possibilities on front camera module: Dot projector, Infrared Camera Flex, Flood illuminator etc, so we suggest you go to local shop and check what's the exact problem then fix it. And for true tone problem, probably your screen isn't genuine, or the new screen wasn't copy&write genuine true tone data from old screen. Hope it helps.
Face ID problem is more complicated and more important than true tone, because it's about privacy and financial safety. But JC V1S launched the new dot projector board and upgraded its software, which make it easier to repair.
I've been doing board level repair for almost 20 years, but this one looks more complicated than brain surgery with so many things could go wrong. Yikes! lol Oh and fuq Apple!
@@Elekworld - Sure, anything is possible given enough time and money spent. Unfortunately in certain countries you simply can't charge the customer enough to pay your techs doing a couple of hours of highly skilled jobs. :( It all comes down to a cost/benefit ratio. Apple has got us by our balls (as a metaphor lol).
@@BillAnt lol, easier to understand your feeling with metaphor. Anyway, we can tell the repair price before customer decide to fix the problem or not, then maybe it's easier decision for both customer and us.
No, it won't work, because data can't be burn in it by 3rd party except Apple itself, it wasn't designed for this. Have to use JC blank dot projector flex and its device.
@@Elekworld I've subscribed instantly. But I have a small request. I really want to know how the JC VS1 Programmer works and how I am able to use it to its full potential. Can you make a video explaining everything about the JC VS1. Love your content!!!
@@pacmaninfinity4015 Yes, actually we have made this video 1 year ago, check this: czcams.com/video/n7Z_-g1q0Pc/video.html. However, bcuz JC tools is always keep upgrading, so please stay tuned with our video update, we might use JC V1S and upgraded board&function to repair more phones.
@@Elekworld Perfect!!! Thank you. I really love what you are doing. I my self bought the JC VS1 and I wanted to fix a phone I owned. I'm not a professional but I do have a passion in repairing phones and other devices. I'd love to learn more from you and this channel in the future.
Please check this link and login to see price: www.elekworld.com/Shop/productinfo.aspx?proid=13658&categoryid=289. Also you can email service@elekworld.com to get exclusive 1 on 1 service.
Yes, make sure that two things have been settled. First, make sure your JCID V1S has been upgraded with the dot projector repair software. Second, make sure you have the new Dot project testing board.
@@valentinopaco The mosfet was short circuited so we have to make it again. And, the mosfet is bundled with iPhone one by one, you must use the genuine mosfet to resume the Dot project function.
Hello, what a nice and helpful video you guys did here... I bought the machine and did the same as you guys did, but there is a problem is that when i add my face, and lock the phone it won't open to my face. So let me be clear... The thing is that at the beginnning it was giving a warning to get the phone lower and upper. right now everything looks great. Just that when i put my face and it says everything is complete . My face id restarts directly. So please if someone can help me with this or anything because i've tried several times. Thank you so much and i appreciate your help.
Dear friend, we can't exactly know what's the problem by "Face ID restart", so if possible maybe we can contact with skype: sales-elekworld to send a video showing the problem, then we might can be helpful.
Please goes to below weblink and download JC repair platform, register and login, then connect V1S with computer, and click "Repair Fitting" to find the upgrade option: www.jcprogrammer.com/download-center
Please goes to link below and register to see price: www.elekworld.com/shop/productinfo.aspx?proid=12539&categoryid=287, or contact service@elekworld.com for exclusive service.
Hello Sir, thanks for this amazing help i have an issue with my Face id on iPhone X the problem is it keeps saying (move your head a little higher/ position your face inside the square) but nothing happens after i checked the 2 dots and they are there and working, i checked the flood illuminator by calling and the screen went black which means it's also working, i checked the portrait for the front camera and it also worked, everything in the phone works perfectly, but i should mention that the Display is Damaged and contains a green lines from the left side, could that be a reason for why the face id isn't working, or just my face id died and that's it?
@@Elekworld oh, thanks for the reply, but i would like to add that i replaced the screen and in the process i noticed that some dust got into the phone on the face id components and everywhere so i gave it a little bit of cleaning, and Face ID works again
I have a question please , i changed my iphone X batterie by another and i copied data from the old battery to the new battery but in settings it shows service . I did changed sn again with icopy in program on pc , i fixed it it shows the capacity but after few days the battery health shows service again in settings????? What should i do ?
Hey, the best method to remove both battery warning message and show battery capacity is like below two videos: czcams.com/video/AWyLDQIuIBU/video.html with Qianli tool, and czcams.com/video/q7_GLdJ6Oso/video.html with JC tools.
@Elekworld i have iphone X normal not xs or xr. I dont have battery message warning. I Have service and( - - ) in battery health in settings after copying Sn from old battery. Because the JC did not copy just the SN it did copy the battery health status from the old battery also , how to fix this please .
@@thisisben7411 I wonder if your new battery is original quality or not please? Technicians said this works on original quality battery and stable, but aftermarket quality might unstable.
I can’t write data on another dot matrix ☹️ I have 2 dot matrix for xs max one of them fused the 2nd one perfect but when i try to write the data the device say that its impossible to verify dot matrix material and burning! failed
@@thedarknesscrazy1200 You need below items to complete the fix: JC V1S+Dot matrix board(You already have) + JC Blank dot projector flex(Check video 1:29).
Bro, considering all the risk and cost during export&important customs clearance, sipping cost, shiping time, privicy&financial safety, we suggest you find a professional local repair shop to fix it. We might launch repair course in future, if you're interested in this, pls sub our channel and stay tuned for update, bro.
Sir. I am having a Querry My face id is asking to move phone lower and higher. But my Dot projector and flex cables are working fine. We checked it on Flex cable data copying Device Face Id status is normal. Portrain mode is working Fine. But still face id is not working
Hey Syed, pls check below two potential problems: 1- if the flood illuminater flex damaged or not; 2- check if all the portrait under natural light still workable.
@@syedomairrr One more possibilities: Need adjust the infrared camera location slightly higher or lower. You don't have to move infrared camera, just adjust the metal bracket which hold infrared camera higher or lower. And pls note don't touch Dot projector camera when you doing this.
If you have all other repair tools, you need just JC V1S programmer with truetone board + extra Dot projector board, totally about $63. For any other questions and exclusive service, please contact service@elekworld.com. :-)
@@Elekworld my mobile in warranty but its water damage bcoz i swim with my iPhone 11 Pro After that my face id stop working But i was ok till now it happened before 20 days But from yesterday i have one new from I don’t its come after the new update or else My right side screen from corner not working properly like it difficult to press (p) button Full Vertical line from Top to lower screen do u have any idea about the problem
If u r perfect answer dis I have done all d work as i seen d vedio but Stil my phone read d face and setup face id complet but when i lock my my phone then not open phone. Swap d phone massage display
it? a big fake !!! I tried yo copy an original face id module to another and it does't work. the replacement part is ok an the original also,. is wasting your time and money! verry disapointed
Bro, it won't work if you use another original Face ID module, because data can't be burn in it by 3rd party except Apple itself, it wasn't designed for this. You have to use JC blank dot projector flex and its device to complete the repair.
i don't get why theses videos . just have writing why would i look for a video on how to do something. if I wanted to just read something with pictures i would read an article or find some site on google, just bugs me... i came for a talk through not a read through
Thx for advice, Kym. Pls check our latest videos, we've complete videos with audio for better understanding. Pls stay tuned with us if you like our video and content. :-)
We had a repairing video about how to fix the problem of Face ID set up failure by grinding the metal shield on the Face ID module before, but some fans left comments that grinding method would leave obvious traces on Face ID module, which is not good for repair shop recycling. Now we will solve this problem by using hot air gun and updated JC V1S machine.
Hi Dear, nice Video Thanks! i have a question, i have a this same problem (upper / lower) but after DOT test i get S,B,D,A abnormal but rest ist normal ( ICC, NTC ) what is the problem? and in dont see "Results" or "FUSED" message. Thank you so much
@@now6942 Hi, probably the power suply diode has been short-circuited, need use tin wire to connect it again. Pls check video from 2:35, connect it and test again.
@@Elekworld my iphone x showing Face ID not available
@@Elekworld and also not showing True Tone feature...
@@Faiz_k_fk Face ID not working, depends on many possibilities on front camera module: Dot projector, Infrared Camera Flex, Flood illuminator etc, so we suggest you go to local shop and check what's the exact problem then fix it.
And for true tone problem, probably your screen isn't genuine, or the new screen wasn't copy&write genuine true tone data from old screen. Hope it helps.
Excellent work Good for new user of Jc v1s as i am ❤️
Thanks bro, pls stay tuned with us for more update. :-)
Nice One
Thanks, Rana. If you like our video, pls sub for more helpful video update. ☺️
Wow I didn’t know it was possible to do all of this with the JCVS1 I was about to buy the I2C face Id repair kit
Yes, JC V1S is one of the best programmer that is very helpful and powerful.
Nice
Thanks for comment, pls subscribe our channel for more helpful update. :-)
Good vid as always
I thought this would have been a simple repair like the True Tone , where you would copy and paste the data
Face ID problem is more complicated and more important than true tone, because it's about privacy and financial safety. But JC V1S launched the new dot projector board and upgraded its software, which make it easier to repair.
I've been doing board level repair for almost 20 years, but this one looks more complicated than brain surgery with so many things could go wrong. Yikes! lol Oh and fuq Apple!
@Bill A Vivid metaphor! Maybe we need thanks Apple for bring all repairmans' skill going up to higher level.😂
@@Elekworld - Sure, anything is possible given enough time and money spent.
Unfortunately in certain countries you simply can't charge the customer enough to pay your techs doing a couple of hours of highly skilled jobs. :( It all comes down to a cost/benefit ratio. Apple has got us by our balls (as a metaphor lol).
@@BillAnt lol, easier to understand your feeling with metaphor.
Anyway, we can tell the repair price before customer decide to fix the problem or not, then maybe it's easier decision for both customer and us.
Good video. is it possible to use a healthy face id original module and program it with the one that is defective?
No, it won't work, because data can't be burn in it by 3rd party except Apple itself, it wasn't designed for this. Have to use JC blank dot projector flex and its device.
Amazing!!!
Thx for comment, if you like our video pls sub us and stay tuend for more helpful update. 😊
@@Elekworld I've subscribed instantly. But I have a small request. I really want to know how the JC VS1 Programmer works and how I am able to use it to its full potential. Can you make a video explaining everything about the JC VS1. Love your content!!!
@@pacmaninfinity4015 Yes, actually we have made this video 1 year ago, check this: czcams.com/video/n7Z_-g1q0Pc/video.html.
However, bcuz JC tools is always keep upgrading, so please stay tuned with our video update, we might use JC V1S and upgraded board&function to repair more phones.
@@Elekworld Perfect!!! Thank you. I really love what you are doing. I my self bought the JC VS1 and I wanted to fix a phone I owned. I'm not a professional but I do have a passion in repairing phones and other devices. I'd love to learn more from you and this channel in the future.
@@pacmaninfinity4015 You are so welcomed, friend. Actually we will launch more and more tech videos in future, I beileve it will helps a lot.
Where can I buy the dot projector test board
Please check this link and login to see price: www.elekworld.com/Shop/productinfo.aspx?proid=13658&categoryid=289. Also you can email service@elekworld.com to get exclusive 1 on 1 service.
Why bridge the connection on the fuse instead of replacing it with a non-blown fuse?
Many reasons: 1- A tin wire has same function, 2- there isn't extra fuse to buy and use; 3- same cost and safe enough.
I have jcid also the extension of face id...but its not showing like u menu...do i need to update the firmware
Yes, make sure that two things have been settled. First, make sure your JCID V1S has been upgraded with the dot projector repair software. Second, make sure you have the new Dot project testing board.
Why it is necessary to remove and scaffold the mosfet thank
@@valentinopaco The mosfet was short circuited so we have to make it again. And, the mosfet is bundled with iPhone one by one, you must use the genuine mosfet to resume the Dot project function.
@@valentinopaco I'll recommend Gacktech on Instagram to you.. He's very fast and reliable
Hello, what a nice and helpful video you guys did here... I bought the machine and did the same as you guys did, but there is a problem is that when i add my face, and lock the phone it won't open to my face. So let me be clear... The thing is that at the beginnning it was giving a warning to get the phone lower and upper. right now everything looks great. Just that when i put my face and it says everything is complete . My face id restarts directly. So please if someone can help me with this or anything because i've tried several times. Thank you so much and i appreciate your help.
Dear friend, we can't exactly know what's the problem by "Face ID restart", so if possible maybe we can contact with skype: sales-elekworld to send a video showing the problem, then we might can be helpful.
I'll recommend Gacktech on Instagram to you.. He's very fast and reliable
@@Elekworld how can i contact with you on skype and send you the video ?
@@quadraquadra8838 add me with Skype ID： sales-elekworld
I’ve got the board how do I update my jcv1s to do this as when I plug in the board nothing comes up even when I connect the dot projector
i am having same problem
Please goes to below weblink and download JC repair platform, register and login, then connect V1S with computer, and click "Repair Fitting" to find the upgrade option: www.jcprogrammer.com/download-center
Where is the shop?
Please goes to link below and register to see price: www.elekworld.com/shop/productinfo.aspx?proid=12539&categoryid=287, or contact service@elekworld.com for exclusive service.
Skills
Thanks friend.
Hello Sir, thanks for this amazing help
i have an issue with my Face id on iPhone X
the problem is it keeps saying (move your head a little higher/ position your face inside the square) but nothing happens after
i checked the 2 dots and they are there and working, i checked the flood illuminator by calling and the screen went black which means it's also working, i checked the portrait for the front camera and it also worked, everything in the phone works perfectly, but i should mention that the Display is Damaged and contains a green lines from the left side, could that be a reason for why the face id isn't working, or just my face id died and that's it?
The display screen have nothing to do with Face ID, so probably the dot projector or the sensor flex were damaged.
@@Elekworld oh, thanks for the reply, but i would like to add that i replaced the screen and in the process i noticed that some dust got into the phone on the face id components and everywhere so i gave it a little bit of cleaning, and Face ID works again
@@ahmedp3 Great update ,bro, thanks for sharing.
I have a question please , i changed my iphone X batterie by another and i copied data from the old battery to the new battery but in settings it shows service . I did changed sn again with icopy in program on pc , i fixed it it shows the capacity but after few days the battery health shows service again in settings????? What should i do ?
Hey, the best method to remove both battery warning message and show battery capacity is like below two videos:
czcams.com/video/AWyLDQIuIBU/video.html with Qianli tool, and czcams.com/video/q7_GLdJ6Oso/video.html with JC tools.
@Elekworld i have iphone X normal not xs or xr. I dont have battery message warning. I Have service and( - - ) in battery health in settings after copying Sn from old battery. Because the JC did not copy just the SN it did copy the battery health status from the old battery also , how to fix this please .
@@thisisben7411 I wonder if your new battery is original quality or not please? Technicians said this works on original quality battery and stable, but aftermarket quality might unstable.
@@Elekworld original 100% i took it from a broken iphone x and the jcid also say its original . Do you have any solution that i can try
True depth sensor failed
Hi
I can’t write data on another dot matrix ☹️
I have 2 dot matrix for xs max
one of them fused the 2nd one perfect
but when i try to write the data the device say that its impossible to verify dot matrix material and burning! failed
The key point is that you have to use JC's Blank dot projector flex instead of original dot projector, because it can't be writing and burning data.
@@Elekworld
Is it a read only or whats the problem ???
Bcz i have the v1s with its dot matrix board
And i have 2 front camera assembly
@@thedarknesscrazy1200 You need below items to complete the fix: JC V1S+Dot matrix board(You already have) + JC Blank dot projector flex(Check video 1:29).
@@Elekworld
Thats hard bro 😩
Its gonna take alot of time and work and in the end it might not work and i have to do it again and again 😩
@@thedarknesscrazy1200 Yes, professional skill required and time consuming. Compared with recover Face ID, I still think it's deserves.
Please how can I send my phone to you guys for Face ID repair?
Bro, considering all the risk and cost during export&important customs clearance, sipping cost, shiping time, privicy&financial safety, we suggest you find a professional local repair shop to fix it. We might launch repair course in future, if you're interested in this, pls sub our channel and stay tuned for update, bro.
Sir.
I am having a Querry
My face id is asking to move phone lower and higher.
But my Dot projector and flex cables are working fine.
We checked it on Flex cable data copying Device
Face Id status is normal.
Portrain mode is working Fine.
But still face id is not working
Hey Syed, pls check below two potential problems:
1- if the flood illuminater flex damaged or not;
2- check if all the portrait under natural light still workable.
@@Elekworld sir Both are working Fine.
portrait Under Natural light and Flood illuminator Flex
@@syedomairrr One more possibilities: Need adjust the infrared camera location slightly higher or lower. You don't have to move infrared camera, just adjust the metal bracket which hold infrared camera higher or lower.
And pls note don't touch Dot projector camera when you doing this.
What will be cost for repair
If you have all other repair tools, you need just JC V1S programmer with truetone board + extra Dot projector board, totally about $63.
For any other questions and exclusive service, please contact service@elekworld.com. :-)
@@Elekworld bro i dont even know ABCD about repair ☹️
@@davinder_sasan If so we suggest you go to local repair shop for the help bro.
@@Elekworld my mobile in warranty but its water damage bcoz i swim with my iPhone 11 Pro
After that my face id stop working
But i was ok till now it happened before 20 days
But from yesterday i have one new from I don’t its come after the new update or else
My right side screen from corner not working properly like it difficult to press (p) button
Full Vertical line from Top to lower screen do u have any idea about the problem
@@Elekworld some time its working sometimes not
can you help me broo
yea, what can we do for you？
@@Elekworld can you repair my faceid
@@danpwa2659 It depends on what's the problem of the face ID. Please contact service@elekworld.com for more help.
If u r perfect answer dis
I have done all d work as i seen d vedio but
Stil my phone read d face and setup face id complet but when i lock my my phone then not open phone. Swap d phone massage display
A sake not edit
it? a big fake !!! I tried yo copy an original face id module to another and it does't work. the replacement part is ok an the original also,. is wasting your time and money! verry disapointed
Bro, it won't work if you use another original Face ID module, because data can't be burn in it by 3rd party except Apple itself, it wasn't designed for this. You have to use JC blank dot projector flex and its device to complete the repair.
I'll recommend Gacktech on Instagram to you.. He's very fast and reliable
i don't get why theses videos . just have writing why would i look for a video on how to do something. if I wanted to just read something with pictures i would read an article or find some site on google, just bugs me... i came for a talk through not a read through
Thx for advice, Kym. Pls check our latest videos, we've complete videos with audio for better understanding.
Pls stay tuned with us if you like our video and content. :-)