AMAZING...!!! CARA MEMBUAT LAYANG LAYANGAN NAGA PART 40 DARI LIDI KELAPA/How To Make Dragon Kite
Vložit
- čas přidán 31. 10. 2023
- membuat layang layangan naga part 40 dari lidi kelapa.
Bahan yang digunakan adalah:
Lidi kelapa
bambu untuk batang tengah
lem super
lem fox
pisau lipat
benang nilon
benang cap jagung
kertas plastik
#minecraft
#layanganmineraft
#layangan
#layanganlidi
#layanganparasut
#waumalaysia
#wauatokdalang
#waubulanmlaysia
#waulidi
#kite
#layanganburung
#layangangapangan
#layangannaga
#layangannagamini
#layangannagaviralditiktok
#layanganjanggan
#layangannagaraksasa
#naga
#dragonkite
#layangannagaraja
#layangangapanganbanyuwangi
#layanglayangan
#layanganviral
#kite
#kiteflying
#layanganpohon
#layanganlabalaba
#spiderkite
#layangansikepok - Jak na to + styl
अच्छी पतंग बनाई है 👍👍
Mantap bg
Dragon kite beautiful nice i dol
Thank you
❤❤❤❤ Mantaap
Thank you
Bạn sử dụng vật liệu gì cho tôi thống kê chi tiết được không kể cả loại keo
Coba bikin layang-layang kotak
Nice projet !
Thank you very much
Angas
Si tan alguien me hubiesen enseñado a hacer esta cometa cuando era niño 😞😎
Quedó bien ❤❤
Marvellous.
Bu chekinish yonima🎉🎉
Wow😮
😮😮
Thats sick
❤❤❤❤❤❤❤❤❤
Hay quá ha
WOW 🥰
❤❤❤❤❤
Tutor cr rautanx mas karena SMA video kebanyakan dr lidi.mohon tolong pakai bambu aja serta cr rautanx sedetil mungkin.trima kasih
Makasih masukannya
👏👏👏👏❤
ffffffff hhhhiiii wo wai mo sukuna sukuna wo wai mo
mirip layangan aang avatar
Sekdar saran bang,dr setiap videonya.yg sya tonton sangat di sayangkan tidak d penjelasan step by stepnya,mrut sya itu sangat membingungkan bagi pemula seperti saya..terlebih saat video perakitannya malah di percepat..jadi malah tmbah bingung,itu aj sih saran saya,selebihnya ok semua trima Kasih
Haha
Udh detail itu bang ada ukuran juga Lo 😁🤣
IQ 20 lagi menjelaskan kluhan hati😂
like🥰
Is everything made using the broomsticks?
Buena tarde por favor me envían el nombre de los materiales qué hay que comprar pero en español gracias
per stick the size
is that paper or plastic? thanks for the reply
Paper
Instructions unclear, made toothless
Por favor me dicen el nombre de los materiales? Gracias
it's in the video description ☺️
kok belum upload bang
Udah bang
Live ff
kerangka tengah dari bambu y bang
Betul
### Tools needed:
- Small knife
- Scissors
- Hot glue gun
- Marker
### Media needed:
- Two wooden dowels (one 40 inches/100 cm, one 34 inches/85 cm)
- String
- Garbage bag or thin plastic sheet
### Steps:
1. Cut one dowel to 34 inches (85 cm).
2. Lay the 40-inch dowel flat.
3. Place the 34-inch dowel on top, 4 inches (10 cm) above the midpoint, perpendicular to the first dowel.
4. Wrap string around the intersection and hot glue to secure. Let dry.
5. Cut a notch in each dowel end.
6. Run string around the dowel ends, using the notches to hold it in place. Pull taut and tie.
7. Cut off excess string.
8. Lay the frame on a garbage bag or plastic sheet. Outline with a marker.
9. Cut the plastic, adding 2 inches (5 cm) around the outline.
10. Glue the frame to the plastic. Fold the excess plastic over the dowels and press into the glue.
11. Tie a piece of string to each dowel end and connect them with a third string at the intersection for the bridle.
to make a kite first you'll need two wooden dowels that are less than two inches five centimeters in diameter and about 40 inches 100 centimeters long cut one of the dowels so it's about six inches 15 centimeters shorter than the other one then lay the longer dowel down on a flat surface and place the shorter dowel on top of it about four inches 12.5 centimeters above the midpoint so they're perpendicular wrap string around the point where the two dowels meet and use hot glue to cover the string and seal the two dowels together wait a few minutes for the hot glue to dry next cut a notch in the end of each dowel using a small knife run a long length of string around the ends of the dowels to connect the four ends use the notch as you cut to keep the string in place pull the string so it's taut then tie the two ends into a knot cut off the excess string with scissors now lay your frame on top of a garbage bag or sheet of thin plastic and outline the frame with a marker set the frame aside and cut around the outline you drew adding two inches five centimeters to each side as you cut then lay the frame on top of the sheet you've cut and line the inside of each dowel with hot glue fold the excess plastic over the dowel and press it into the hot glue next tie a piece of string to the end of one of the dowels run the other end of the string to the opposite end of the dowel and tie it there repeat this process with the other dowel and a second piece of string finally tie the two lengths of string to a third piece of string at the junction where the two strings meet to make your brindell and line
thank you bro❤😊🦸
### Tools needed:
- Small knife
- Scissors
- Hot glue gun
- Marker
### Media needed:
- Two wooden dowels (less than 2 inches/5 cm in diameter, one 40 inches/100 cm long, the other 34 inches/85 cm long)
- String
- Garbage bag or sheet of thin plastic
### Steps:
1. Cut one of the wooden dowels to be about 34 inches (85 cm) long.
2. Lay the longer dowel (40 inches/100 cm) on a flat surface.
3. Place the shorter dowel (34 inches/85 cm) on top of the longer one, about 4 inches (10 cm) above the midpoint, so they are perpendicular.
4. Wrap string around the point where the two dowels meet.
5. Use hot glue to cover the string and seal the two dowels together. Wait a few minutes for the hot glue to dry.
6. Cut a notch in the end of each dowel using a small knife.
7. Run a long length of string around the ends of the dowels to connect the four ends, using the notches to keep the string in place. Pull the string taut and tie the ends into a knot.
8. Cut off the excess string with scissors.
9. Lay your frame on top of a garbage bag or sheet of thin plastic and outline the frame with a marker.
10. Set the frame aside and cut around the outline you drew, adding 2 inches (5 cm) to each side as you cut.
11. Lay the frame on top of the sheet you've cut and line the inside of each dowel with hot glue.
12. Fold the excess plastic over the dowel and press it into the hot glue.
13. Tie a piece of string to the end of one of the dowels, run the other end of the string to the opposite end of the dowel, and tie it there.
14. Repeat this process with the other dowel and a second piece of string.
15. Finally, tie the two lengths of string to a third piece of string at the junction where the two strings meet to make your bridle and line.
Good luck