Notes - You can see I get some lag spikes around 4:14, that only occurs when trying to render the canon for some reason, both of the builds are really lag friendly overall going barely over 7mspt from my testings - Despite being quite similar, all this was develloped independently from cubic's recent work, I've actually had this idea for almost a year, just haven't found the time or the will to design smthing -for nether compatibility of the third design, just replace the waterlogged stair with an enchant table, this just makes the build a bit less idiotproof since the thing must be started already lazy loaded
This is amazing! I have a question to you: As far as i understand, the tnt cannon lauches the tnt's into unloaded chunks, where they load the chunk for a single tick, making it lazy processing, thus it does not process entities. Does this basically mean, that you are theoretically able to load the chunk anywhere in the world for a single tick with similar contraption? But my biggest question is what would have been, is you load like this a grid 3x3 of chunks in the same tick? Will the middle chunk become entity processing for that tick? If so, i'd imagine it might be possible to have a portal-based chunk-loader in this midde chunk, which would have been launched remotely like this! If this is true, then you basically invented the way to load chunks anywhere in the world, and having stasis chambers + portal loaders there you can make a working single-person teleportation which is not relying on another person loading the stasis chambers/chunks to make you eligible to teleport. This might finally overcome another major problem of all chunk-loaders being turned down on server restart.
Nice to see you using the trick I discovered/s. But seriously though these tiny cannons are impressive and I don't doubt that many people have thought of this concept. In fact I first thought of it during a computational modelling and control lecture almost a year ago. The general practice for when multiple authors publish similar works independently is we cite the others work. I have been consistent in citing the sources for my own research into cannon tech and I think you should do the same.
@@cubicmetreand you're right, I just clearly don't put as much effort into the editing than you do because that's not what interests me so I tend to omit stuff, I can add your name in desc too if that's fine with you
@@_darkvictor_ With that in mind I'll add a link to this video in my description. Just know I respect your work and whenever anyone comes to me with problems about my moss farm or how to farm bonemeal I always reccomend your design because its the best.
@@travisferrin Docm77 starts talking about it around 31:08 in "The Court Case - Hermitcraft Season 10 Episode 19": czcams.com/video/4YgPMJieSA4/video.html
Just when you thought Dark coun't get any more impressive, he makes a quarry you can build in 20 mins and a 7-block device that allows you to travel back in time!
So doing some maths i've found some timings For the 2nd design, it can be found out by using the equations (X-1)*7 = time to wait in minutes, where x = dropper count Ex: 2 items in dropper, (2-1)*7 -> 1*7 = 7 mins for the 2D mining machine, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. Ex: 72 items in tunnel length, barrel count = 48, row spacing = 4 (24*(72) * (48/4) + 20(72))/1200 -> ((1728*12) + 1440)/1200 -> (20736 + 1440)/1200 -> 22176/1200 = 18.48 minutes. Round up you'll have to wait for 19 minutes
@table5816 how can I know if it is time to load chunks and turn of the machine? I am testing the 2d version and when I load the chunks it explodes. Also how many items should I add to explode lets say 100*100 chunks? Thanks
Thank you so much for doing this! The formula(s) here have been a great boon in helping me not spend loads of extra time waiting after the canon has finished its mining job. Somehow I can't believe your comment has only 1 like, I mean, it's SO FLIPPING USEFUL from any kind of practical standpoint regarding these machines. Again, thanks ⛏ . edit, how does the initial offset affect this? Or is it done in a way which doesn't change the time?
@@PatAnderson1 No. It has to be lazyloaded when started. Docm goes over it in his video around 43:30: czcams.com/video/4YgPMJieSA4/video.htmlfeature=shared&t=2583
I'm convinced this man is too powerful. If he didn't take a hiatus for the past year tmc would already be complete, there would be nothing left to do because dark already did it better. Truly a tmc legend, welcome back!
Saw Doc's video, so of course I needed to come see your video. Im not likely to build this, but its such an impressive feat I had to see it. Amazing stuff; absolutely amazing...
This is not the coolest thing you've done. This is the coolest thing anyone has done. So impressive... And the fact that the redstone is also compacted so well is just ridiculous in the best way possible.
I recommend using TISCarpet "EntityTrackerInterval" set to 1, TweakerMore "disableEntityRenderInterpolation" set to true, and tweakeroo "disableClientEntityUpdates" set to true. With these, the server sends entity packets every tick, and the entities you see are forced to correspond to the those packets, instead of simulating and interpolating clientside. Game changer for showing other people what TNT machines are actually doing (and also a quality of life feature while working on them) Cool stuff 👍
I just came from seeing this in action on Docm77's channel. Do you realize you've designed a *Discontiguous Particle Acceleration System?* You're the friggin' *Edward Teller* of Minecraft, and I for one, am terrified! 🤣
For me the 2D cannon works great in the overworld, but I just can't get it to work in the nether, it either makes a really long tunnel in the x direction before exploding or works, but makes first tunnel really short, next a bit longer and so on, I've made sure to make clearance tunnel in x direction and checked my schematics, but nothing helped, does someone knows if there is something I can do to fix it? Forgot to edit the comment. Turns out I was making tunnels only in front of 2x2 hole in the machine and x direction, but I also needed to make one in front of 3x1 hole (not the one with grindstone showing), this fixed it for me.
This is such a compact TNT warping cannon! Amazing how the technology has been refined in just a short time. I'd make one for the nether, and hope most items get melted in lava.
So I built the "2d nether version" which subs out an enchanting table for the waterlogged stair in survival... Twice. Lessons learnt: 1. When I rotated my schematic, I completely forgot that TNT always moves in the x direction first and I rotated the "clearance tunnel" with the cannon. Don't do this. Make your 2x2 tunnel in the x direction regardless of the canon's orientation. 2. In theory, for maximum debris, the enchanting tables should be at y13. However, this is going to blow out the bottoms of lava lakes. Save yourself a headache and put the enchanting tables at y11 and this won't happen.
actually no, tnt moves first vertically then horizontally in the axis with the most momentum first (this changed at one point), but there is 2 clearance tunnel to dig either way for both axis, because the axis with the most momentum isn't always the same, one 1x2 tunnel and one 2x2 tunnel
hey if you got this to work could you help me troubleshoot it? im building this in my hardcore world rn and it seems to always blow itself up no matter what i do
Tu apportes vraiment une nouvelle vague de fraîcheur à la scène Minecraft. Le travail bien pensé, innovant et nouveau que tu apportes est une réelle valeur ajoutée à ta chaîne et à tes vidéos. Continue à prioriser la qualité à la quantité. Cette vidéo est encore une fois une dinguerie
i cant for the life on me manage to get the 2D cannon working in the nether, i have replaced the waterlogged stairs with an enchanting table and as far as i know i'm starting the machine while in lazy chunks. Every time i return to see the results it just blows up and only a small tunnel has been created. I would really appreaciate if somebody could help me out, i've read every comment and cant find anything that works.
Can the 2d version be modified so it doesn't drop any items? If I want to use it in the nether it seems like a waste to cause all that lag while only collecting ancient debris
A video following up Docm77's explanation about how to configure this and set it up for different digging situations would be lovely. For example I was wondering how configureable this would be for digging out custom perimeters as opposed to an overhead system since it seems so incredibly fast. Can they can vertically stacked effectively to do that and how would that effect the performance of it in terms of block breaking?
so far i understood most of it, the biggest thing, especially for the 2D Canon are the signs, im not entirely sure how the math of them works, for example does havin more Items in Tunnel Length increase the size and by how much? i tested it once and put in 3 Items after i came back it created a 200 Blocks long tunnel, now i did mess up the timing then but thats generally another concern, how can i calculate how long it takes till its finished, also does tunnel length only set the length in 1 direction or both? i want to build this one on my server but i would like to understand how big of an Area i can create with the current design
One problem I ran to while using the 2D cannon is some blocks getting stuck in the barrel, making the whole thing explode no matter how long I let it run, is there a way to fix it? Edit: It seems that there always need to be more block in "tunnel length" droppers then in the barrel and "initial offset" droppers combined, or at least it fixed the problem for me.
For nether compatibility of the third design, just replace the waterlogged stair with an enchant table, this just makes the build a bit less idiotproof since the thing must be started already lazy loaded
Would it be possible to modify any of these designs so that they DO destroy items? For ancient debris tunneling, you could cut down on a lot of lag by doing so.
Im having a few problems with the 2d cannon its making a diagonal tunnel so like the tunnels get longer everytime it shoots But the first tunnel has like no leingth at all
it should definitely be fine, after all he's on a low-end pc and recording at the same time and it was able to handle tick warps left right and center. hopefully your server isn't from the 1800s. if you know the server's cpu, go onto passmark and search it up. e.g. this guy's is the i3-1005g1, which has a rating of 5000, which is pretty bad. a 100$ ryzen 5600x has a rating of 20k
where do you need to stand for this? is there a certain distance, or can you be right next to the machine? im a little confused on that part, just confused on the actual setup of how to do this
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use) Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length. Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one. flip the lever on the 2D blaster and go into the chunk loader portal AFK for roughly 1.5 hours, tho id give it 2 just to be safe pop back through the chunk loader portal. It should work, if it doesn't, check to make sure you have no mods installed. to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation) hope this helped. Extra tips/requirements: -Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper -Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
i wanted to use this machine but every time i tried it exploded, from comments i found out some equation for the time it should run but that still didnt change anything, do you know/remember how should the machine be operated, is there a minimal/maximat time in should be loaded before it is unloaded so it works correctly, and also if you know if it works for newer versions like 1.20.4 would be great
Hey there, I have been trying to make these work for me even just in your creative world download for a couple of days now, I am using carpet mod and intricarpet to turn off chunkloading in the video for testing it but I still can't seem to get it working is there any help or advice you can give me? (incase you couldn't tell I am not very technically inclined)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length. Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one. flip the lever on the 2D blaster and go into the chunk loader portal AFK for roughly 1.5 hours, tho id give it 2 just to be safe. (In your case, instead of going through the portal and afking for 2 hours, you can just use /interaction chunkloading false, followed by /tick rate 500, and wait about 2 minutes, then turn tick rate back to 20 and use /interaction chunkloading true) pop back through the chunk loader portal. It should work, if it doesn't, check to make sure you have no mods installed. to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation) hope this helped.
Hey dark, amazing video! I got the 2d one working in the nether with commands, but when i do it in survival exactly the same without commands the tnt stops generating and nothing explodes. I even got it to work in my survival world but only if i set the tick rate to 500, the chunk loader seems to work. any ideas to fix it? not sure what i could have messed up if its working with commands
i don't understand how to use the second model i built it twice and it blew up both times idk much about this tech so someone help can i just stand near it or do i need to be 64 blocks away so the tnt doesn't render or idk
hey uh ... I found these cannons very intresting, and I see some of the chunks are marked out with green blocks, does that mean all I need to do is make a chunk loader that loads the green chunks, and 1 wireless redstone that loads the red chunks when I send the signal. Will that make this cannon accessable whenever and wherever I wish to use it ?
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use) Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length. Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one. flip the lever on the 2D blaster and go into the chunk loader portal AFK for roughly 1.5 hours, tho id give it 2 just to be safe pop back through the chunk loader portal. It should work, if it doesn't, check to make sure you have no mods installed. to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation) hope this helped. Extra tips/requirements: -Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper -Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
hey any chance you could help me? I built this in my hardcore world and it works in testing with commands, but every time I try to run it in my world it seems to stop generating tnt and doesn't blow anything up
Technical minecrafters rarely do tutorials. They provide a world download, and assume everyone else uses litematica too… Alternatively you could keep switching worlds
I'm attempting to build the 2D tunneler in my SMP server. I took a schematic of it set up to work from the world download and it provides no errors (not even incorrect block states) other than replacing the waterlogged stair with another enchanting table. As far as I can tell all the inventories are filled properly. Yet despite that the scaffolding does not update when the TNT portion shifts under it, leading to the piston not shoving the TNT/observer/deepslate blocks back over and never dropping any tnt. The only thing I changed was adding a redstone repeater at the end of a line leading to a lever, pointing into where the lever usually is. Not sure what to try here. Edit: Ok, some quick testing shows that with solid blocks the pistons work correctly. Replacing them with TNT again stops it working. I'm also noticing that the "tunnel length" dropper clock thing is not pushing items between the droppers
@@hastinrhenius193 Yes, if the server doesn't have any mods that cause issues it works perfectly fine - I believe the issue I had was that I had the number of items in one of the setup portions too low.
where can i get che tutorial of how to do it? and, more important, can i do these machines in my survival world without using any kind of cheat like stop the chunkloading, tick booster, etc?
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length. Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one. flip the lever on the 2D blaster and go into the chunk loader portal AFK for roughly 1.5 hours, tho id give it 2 just to be safe pop back through the chunk loader portal. It should work, if it doesn't, check to make sure you have no mods installed. to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation) hope this helped. Extra tips/requirements: -Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper -Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player. -If you have modifications, it might not work. Anything fabric, minihud, litematica, or carpet related should be safe, but if you followed all the previous steps and it still isn't working in the test world, try it in vanilla. -If you want to build it in survival, just reply to this comment asking and ill type up a comment on how to do that. (I saw your comment, I will work on another copypasta for this later, as its late right now)
hey any chance you could help me? ive built this in my hardcore world but i cant get it to work. my setup works if i test it with the tick rate 500 command, but when i wait normally the machine seems to stop making tnt and never blows anything up@@shadowpanther298
How do we use this? Do we build a chunk loader in the light Green square and afk in the nether? Also, if you have ignited tnt in a lazy chunk which has been subjected to an explosion by a TNT in a non lazy chunk, will that that get propelled once loaded into an entity processing chunk? I really had a lot of trouble getting the second one to work in the given wdl. I turned off the explosion damage rile btw but I have no idea where to AFK [Edit] Ok, so I've been messing around with the 1D cannon which I managed to get working and the 2D cannon too. In terms of chunk loading, the chunk with the lime concrete floor is the right position relative to all the devices. The 2D cannon is on the corner of the entity processing chunks, bordering 3 lazy chunks. This is what lets the machine achieve the 2nd dimension (i think?). Build the chunk loader and get out of the area I guess. Otherwise, turn render distance down to 2 (simulation distance doesn't matter) and then move away until the lazy chunks are not visible, i.e. the chunks with red floors shouldn't be visible. They're still loaded by the game, coz if you use freecam, you can see TNT fuse particle effects and redstone particles in those lazy chunks. Then basically AFK for as long as possible. You can't really tell when the whole mining process is done without Chunk Debug, which isn't something most people would like using in survival worlds, so just AFK for as long as you can?
Yo ok I tried putting the chunk loader in the lime green chunk, and used intricarpet to turn off chunkloading (It turns it off for the player) but it didn't work. I just afk'd for 10 minutes with the tick rate cranked to 500 (Also with intricarpet) and nothing happened. The tnt stopped appearing in the cannon but also no blocks broke. Idk how thats even possible. Nvm, a lot of troubleshooting and around 30 changes later I managed to make it work.
@@orangenal he cba and he probs forgot Anyways, yeah I messed around with it and got the 2D cannon to work and did a mock build in survival. I didn’t finish coz of reasons but it was easy enough to build. In creative testing, yes, it’s definitely effective and can easily wipe out a large area in about 30 mins of afk
How do you use the /interaction command? I tried to type in the command, but it wasn't available. I have carpet mod, but it doesn't appear to be a carpet command.
how am I supposed to activate the command it's not showing on my /input it's says "Unknown or incomplete command...." plz help do i need to install a mod or what ?
Hello, I rebuilt the first drill shown in the video, but it didn't work. TNT just exploded in one place and did not shoot in the right direction. help me please
I saw your other comment. This is almost 100% due to the fact youre playing on paper, which these (And most other technical machines) will not function on. Sorry dude, looks like youll have to use a normal tunnel bore :/
I checked on the server in creative, in the first cannon the trolley loads chunks, the server core is purple, how can this be fixed? version 1.20.1, but in your world it actually working, in other world in singleplayer - not
Yes it’s completely usable without mods/commands. Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use) Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length. Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one. flip the lever on the 2D blaster and go into the chunk loader portal AFK for roughly 1.5 hours, tho id give it 2 just to be safe pop back through the chunk loader portal. It should work, if it doesn't, check to make sure you have no mods installed. to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation) hope this helped. Extra tips/requirements: -Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper -Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
i built one of the 1D tunnelers in the nether, and it seems to be working fine except that the TNT is getting downward momentum as well as forward momentum, causing it to warp under the bedrock for most of the tunnel's length. any idea how to fix this?
also, if somebody happens across this comment and is also trying to make the 1D tunneler, make sure you turn off the lower lever before running it, i missed this and it caused me a lot of headaches
@@_darkvictor_ well i dunno what the deal is then. this happens in the original world download too. i *am* playing with some mods, but nothing game changing, and nothing that should affect how TNT behaves
IDk why shulkercraft has many subs while the people like dark ending creditts and emdy and many more doesn't :) i am reallly looking forward to this thing :)
Tried to build the first design copied it exactly. Don't know why it not working on friends server. He running paper with tnt duping. Just don't know why it's not doing anything when I leave the chunk. Can anyone help me here???
Hellooo :P From my experience, Paper servers have many more technical redstone problems than simply tnt duping. I believe tnt does not warp into unloaded chunks on Paper servers. There may be other details as well, but to make it work for me I had to convert my server to Fabric (which may not be an option for you). . P.s. I may be wrong in the details, but think I got the gist of it. If any technical players know more that'd be great b: . Best luck, Skittles :) [job experience; built the first one 4 times, and blew up the 2D cannon three times before I got it working]
So - how do you make it work? Does Simulation distance matter, or only render distance? In servers, do you need to take into consideration server side rendering or only client side? The last machine is between 4 border chunks, so in which of the 4 corners do you have to go for the machine to work? You mentioned in a comment that the tnt has to be already lazy loaded for the last machine in the nether, how could you make that happen? Just with a trail of redstone and a lever?
Simplest way is to build a chunkloader 1 chunk away, diagonnaly for the las design, this way you dont have to stay around while it's processing, and yea for the nether, either a redstone line, or an item on a pressure that activates the canon when it despawns, giving you time to leave the area, also i'd suggest putting the tnt last when building this thing, so you dont mess things up
@@_darkvictor_ Thanks a lot! I've managed to make the last design work in creative, but for the life of me I can't make it work in my server - I've built it 10~ times and it always explodes. Is there any mods, or mistakes while building (with litematica) that could lead to explosions?
@@Neonphrenic make sure the chunk alignment is correct, and that you cleared a path for the tnt for 2 chunks in both axis, just like in the world download, also check schematic integrity, block orientation is very important too
Notes
- You can see I get some lag spikes around 4:14, that only occurs when trying to render the canon for some reason, both of the builds are really lag friendly overall going barely over 7mspt from my testings
- Despite being quite similar, all this was develloped independently from cubic's recent work, I've actually had this idea for almost a year, just haven't found the time or the will to design smthing
-for nether compatibility of the third design, just replace the waterlogged stair with an enchant table, this just makes the build a bit less idiotproof since the thing must be started already lazy loaded
This is amazing!
I have a question to you:
As far as i understand, the tnt cannon lauches the tnt's into unloaded chunks, where they load the chunk for a single tick, making it lazy processing, thus it does not process entities.
Does this basically mean, that you are theoretically able to load the chunk anywhere in the world for a single tick with similar contraption?
But my biggest question is what would have been, is you load like this a grid 3x3 of chunks in the same tick? Will the middle chunk become entity processing for that tick?
If so, i'd imagine it might be possible to have a portal-based chunk-loader in this midde chunk, which would have been launched remotely like this!
If this is true, then you basically invented the way to load chunks anywhere in the world, and having stasis chambers + portal loaders there you can make a working single-person teleportation which is not relying on another person loading the stasis chambers/chunks to make you eligible to teleport. This might finally overcome another major problem of all chunk-loaders being turned down on server restart.
Making a grid of lazy-loaded chunks no longer promotes the load status of the middle chunk unfortunately :(
Nice to see you using the trick I discovered/s. But seriously though these tiny cannons are impressive and I don't doubt that many people have thought of this concept. In fact I first thought of it during a computational modelling and control lecture almost a year ago. The general practice for when multiple authors publish similar works independently is we cite the others work. I have been consistent in citing the sources for my own research into cannon tech and I think you should do the same.
@@cubicmetreand you're right, I just clearly don't put as much effort into the editing than you do because that's not what interests me so I tend to omit stuff, I can add your name in desc too if that's fine with you
@@_darkvictor_ With that in mind I'll add a link to this video in my description. Just know I respect your work and whenever anyone comes to me with problems about my moss farm or how to farm bonemeal I always reccomend your design because its the best.
came over from docm77, awesome thing you designed. glad that he showed it in his video :)
what video was it
@@travisferrin Docm77 starts talking about it around 31:08 in "The Court Case - Hermitcraft Season 10 Episode 19": czcams.com/video/4YgPMJieSA4/video.html
It was Docs latest HermitCraft S10 video, Episode 19.
Just when you thought Dark coun't get any more impressive, he makes a quarry you can build in 20 mins and a 7-block device that allows you to travel back in time!
So doing some maths i've found some timings
For the 2nd design, it can be found out by using the equations (X-1)*7 = time to wait in minutes, where x = dropper count
Ex: 2 items in dropper, (2-1)*7 -> 1*7 = 7 mins
for the 2D mining machine, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing.
Ex: 72 items in tunnel length, barrel count = 48, row spacing = 4
(24*(72) * (48/4) + 20(72))/1200 -> ((1728*12) + 1440)/1200 -> (20736 + 1440)/1200 -> 22176/1200 = 18.48 minutes. Round up you'll have to wait for 19 minutes
@table5816 how can I know if it is time to load chunks and turn of the machine? I am testing the 2d version and when I load the chunks it explodes.
Also how many items should I add to explode lets say 100*100 chunks?
Thanks
Thank you so much for doing this! The formula(s) here have been a great boon in helping me not spend loads of extra time waiting after the canon has finished its mining job. Somehow I can't believe your comment has only 1 like, I mean, it's SO FLIPPING USEFUL from any kind of practical standpoint regarding these machines. Again, thanks ⛏
.
edit, how does the initial offset affect this? Or is it done in a way which doesn't change the time?
When you flip the lever, do you fly away to unload the chunks and then wait 19 minutes for the Example on the 2D machine?
@@PatAnderson1 No. It has to be lazyloaded when started. Docm goes over it in his video around 43:30: czcams.com/video/4YgPMJieSA4/video.htmlfeature=shared&t=2583
I'm convinced this man is too powerful. If he didn't take a hiatus for the past year tmc would already be complete, there would be nothing left to do because dark already did it better. Truly a tmc legend, welcome back!
Clearly he went on a hiatus for a year to give everyone else a chance (im kidding btw)
I don’t get it does this have to be in lazy chanks ?
clearly if he didn't there would have already been 50 new falling block methods
Saw Doc's video, so of course I needed to come see your video. Im not likely to build this, but its such an impressive feat I had to see it. Amazing stuff; absolutely amazing...
This is not the coolest thing you've done. This is the coolest thing anyone has done.
So impressive... And the fact that the redstone is also compacted so well is just ridiculous in the best way possible.
still living up to your name of engineering dark (magic) into the game, glad to see you back
nice NTFs btw
Damn. It had been a while since last time you made a video and im glad to see you’re still making GIGA BRAIN contraptions.
I'm so glad you are back with more quality contraptions. Huge fan of your designs!!
Your back, hype. Really nice contraption
This is so impressive. Really glad to see the Legend back in TMC. Super Elegant and amazing as usual Dark.
I recommend using TISCarpet "EntityTrackerInterval" set to 1, TweakerMore "disableEntityRenderInterpolation" set to true, and tweakeroo "disableClientEntityUpdates" set to true.
With these, the server sends entity packets every tick, and the entities you see are forced to correspond to the those packets, instead of simulating and interpolating clientside.
Game changer for showing other people what TNT machines are actually doing (and also a quality of life feature while working on them)
Cool stuff 👍
Ty for the tip !
This is too crazy!
Dark being amazing as always
this is unbelievably cool and so far above my head it could be a space ship. Awesome stuff!
The king is back
Welcome back!
I just came from seeing this in action on Docm77's channel. Do you realize you've designed a *Discontiguous Particle Acceleration System?*
You're the friggin' *Edward Teller* of Minecraft, and I for one, am terrified! 🤣
After more than a year he is back!!
such a simple thing to build, yet it packs a very powerful punch to even the toughest of deepslate
Wow, this is amazing! Great job!!!
Dark never ceases to impress!
Hi dark!!! your shulker farm is still working for me hahah! nice to see ur back, I have plans to use ur bonemeal generator too. cool design!
For me the 2D cannon works great in the overworld, but I just can't get it to work in the nether, it either makes a really long tunnel in the x direction before exploding or works, but makes first tunnel really short, next a bit longer and so on, I've made sure to make clearance tunnel in x direction and checked my schematics, but nothing helped, does someone knows if there is something I can do to fix it? Forgot to edit the comment. Turns out I was making tunnels only in front of 2x2 hole in the machine and x direction, but I also needed to make one in front of 3x1 hole (not the one with grindstone showing), this fixed it for me.
amazing job dude
you don’t know how happy i am to see a video from you……
HE IS BACK
What gets me is how small it is, never would have imagined it would be this tiny
Thanks, this is very cool! I will wait for new videos)
hi there
It's absolutely awesome how you can create TNT railgun this small and even slimeless using lazy acceleraton
"early game weapons of mass destruction"
This is such a compact TNT warping cannon! Amazing how the technology has been refined in just a short time.
I'd make one for the nether, and hope most items get melted in lava.
how to use it in survival ?
Finally we have a really good way to mine sand without duping
Baba is you music ❤ welcome back
The items frozen in air as you fly past is epic! Nice work Dark ^^
bro this is insane
Absolute legend
the goat has landed
surely i wont destroy my friends server doing this
Bro needs to be more appreciated for his designs i love them
So I built the "2d nether version" which subs out an enchanting table for the waterlogged stair in survival... Twice.
Lessons learnt:
1. When I rotated my schematic, I completely forgot that TNT always moves in the x direction first and I rotated the "clearance tunnel" with the cannon. Don't do this. Make your 2x2 tunnel in the x direction regardless of the canon's orientation.
2. In theory, for maximum debris, the enchanting tables should be at y13. However, this is going to blow out the bottoms of lava lakes. Save yourself a headache and put the enchanting tables at y11 and this won't happen.
actually no, tnt moves first vertically then horizontally in the axis with the most momentum first (this changed at one point), but there is 2 clearance tunnel to dig either way for both axis, because the axis with the most momentum isn't always the same, one 1x2 tunnel and one 2x2 tunnel
@@_darkvictor_ oh got it. My mistake. I remembered it moved somewhere first always. I guess that was vertical.
@@madman2572it used to work just like you said like y then x then z
hey if you got this to work could you help me troubleshoot it? im building this in my hardcore world rn and it seems to always blow itself up no matter what i do
amazing
🎉🎉WOOOOOOOOO
Is there a way to make the 2d one only shoot one payload to specific coords? (I know cubic did something similar but looking for a simpler version)
Tu apportes vraiment une nouvelle vague de fraîcheur à la scène Minecraft. Le travail bien pensé, innovant et nouveau que tu apportes est une réelle valeur ajoutée à ta chaîne et à tes vidéos. Continue à prioriser la qualité à la quantité. Cette vidéo est encore une fois une dinguerie
Merci beaucoup !
i cant for the life on me manage to get the 2D cannon working in the nether, i have replaced the waterlogged stairs with an enchanting table and as far as i know i'm starting the machine while in lazy chunks. Every time i return to see the results it just blows up and only a small tunnel has been created. I would really appreaciate if somebody could help me out, i've read every comment and cant find anything that works.
Like the first canon, you just turn it on, leave it in a lazy chunk and when ur done waiting ur just loading it and its finished? Crazey
Awesome design, is there a specific way to build this because this seems pretty survival world friendly.
World download in description
Can the 2d version be modified so it doesn't drop any items? If I want to use it in the nether it seems like a waste to cause all that lag while only collecting ancient debris
A video following up Docm77's explanation about how to configure this and set it up for different digging situations would be lovely.
For example I was wondering how configureable this would be for digging out custom perimeters as opposed to an overhead system since it seems so incredibly fast. Can they can vertically stacked effectively to do that and how would that effect the performance of it in terms of block breaking?
so far i understood most of it, the biggest thing, especially for the 2D Canon are the signs, im not entirely sure how the math of them works, for example does havin more Items in Tunnel Length increase the size and by how much? i tested it once and put in 3 Items after i came back it created a 200 Blocks long tunnel, now i did mess up the timing then but thats generally another concern, how can i calculate how long it takes till its finished, also does tunnel length only set the length in 1 direction or both? i want to build this one on my server but i would like to understand how big of an Area i can create with the current design
One problem I ran to while using the 2D cannon is some blocks getting stuck in the barrel, making the whole thing explode no matter how long I let it run, is there a way to fix it?
Edit: It seems that there always need to be more block in "tunnel length" droppers then in the barrel and "initial offset" droppers combined, or at least it fixed the problem for me.
yes exactly tunnel length shouldn't be shorter than the width, thats a limitation of this canon
We got our yearly single video from Dark finally
dark slays tbh
Great job
I saw water in the 2D one it would be so nice to have it nether compatible
For nether compatibility of the third design, just replace the waterlogged stair with an enchant table, this just makes the build a bit less idiotproof since the thing must be started already lazy loaded
@@_darkvictor_ Is there any reason why it can't just be a lava source block that I'm missing?
@@WhytefangYT Its a waterlogged stair, you can't lavalog stairs (or anything) unfortunately lol.
@@shadowpanther298 I'm aware, I meant literally just a lava source block.
Would it be possible to modify any of these designs so that they DO destroy items?
For ancient debris tunneling, you could cut down on a lot of lag by doing so.
Does the 2d cannon and all the cannons need a certain set condition to work, they just blow tnt up in lava and dont make a tunnel
Im having a few problems with the 2d cannon its making a diagonal tunnel so like the tunnels get longer everytime it shoots
But the first tunnel has like no leingth at all
did you design the tnt duper specifically for the 2D miner? It fits really well
yes
I love this, but I'm a bit concerned about using this on a server - what would happen if the server can't manage the entities on the third machine?
it should definitely be fine, after all he's on a low-end pc and recording at the same time and it was able to handle tick warps left right and center. hopefully your server isn't from the 1800s. if you know the server's cpu, go onto passmark and search it up. e.g. this guy's is the i3-1005g1, which has a rating of 5000, which is pretty bad. a 100$ ryzen 5600x has a rating of 20k
Hi from Doc :)
Hi! What mod do you use to stop chunks from loading? ( /interaction chunkloading false)
intricarpet
where do you need to stand for this? is there a certain distance, or can you be right next to the machine? im a little confused on that part, just confused on the actual setup of how to do this
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length.
Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one.
flip the lever on the 2D blaster and go into the chunk loader portal
AFK for roughly 1.5 hours, tho id give it 2 just to be safe
pop back through the chunk loader portal.
It should work, if it doesn't, check to make sure you have no mods installed.
to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation)
hope this helped.
Extra tips/requirements:
-Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper
-Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
i wanted to use this machine but every time i tried it exploded, from comments i found out some equation for the time it should run but that still didnt change anything, do you know/remember how should the machine be operated, is there a minimal/maximat time in should be loaded before it is unloaded so it works correctly, and also if you know if it works for newer versions like 1.20.4 would be great
do i have to use note blocks as the items?
Hey there, I have been trying to make these work for me even just in your creative world download for a couple of days now, I am using carpet mod and intricarpet to turn off chunkloading in the video for testing it but I still can't seem to get it working is there any help or advice you can give me?
(incase you couldn't tell I am not very technically inclined)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length.
Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one.
flip the lever on the 2D blaster and go into the chunk loader portal
AFK for roughly 1.5 hours, tho id give it 2 just to be safe. (In your case, instead of going through the portal and afking for 2 hours, you can just use /interaction chunkloading false, followed by /tick rate 500, and wait about 2 minutes, then turn tick rate back to 20 and use /interaction chunkloading true)
pop back through the chunk loader portal.
It should work, if it doesn't, check to make sure you have no mods installed.
to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation)
hope this helped.
Hey dark, amazing video!
I got the 2d one working in the nether with commands, but when i do it in survival exactly the same without commands the tnt stops generating and nothing explodes.
I even got it to work in my survival world but only if i set the tick rate to 500, the chunk loader seems to work. any ideas to fix it? not sure what i could have messed up if its working with commands
i don't understand how to use the second model i built it twice and it blew up both times idk much about this tech so someone help can i just stand near it or do i need to be 64 blocks away so the tnt doesn't render or idk
So how do you dowload this
I gaot a file that just displayed numbers
hey uh ... I found these cannons very intresting, and I see some of the chunks are marked out with green blocks, does that mean all I need to do is make a chunk loader that loads the green chunks, and 1 wireless redstone that loads the red chunks when I send the signal. Will that make this cannon accessable whenever and wherever I wish to use it ?
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length.
Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one.
flip the lever on the 2D blaster and go into the chunk loader portal
AFK for roughly 1.5 hours, tho id give it 2 just to be safe
pop back through the chunk loader portal.
It should work, if it doesn't, check to make sure you have no mods installed.
to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation)
hope this helped.
Extra tips/requirements:
-Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper
-Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
hey any chance you could help me? I built this in my hardcore world and it works in testing with commands, but every time I try to run it in my world it seems to stop generating tnt and doesn't blow anything up
Hello dark! I downloaded the same mod as you, but chunk debug map does not open. What to do?
what's powering the piston with the lever on it?
Will it work on server? Where I can't control chuckloading? (or is there a way to do so pls let me know ) 😊
This is rly cool! Do you show how to build these machines anywhere tho? I want to make some=)
Technical minecrafters rarely do tutorials. They provide a world download, and assume everyone else uses litematica too… Alternatively you could keep switching worlds
mind telling me what mod you use to turn on and off chunk loading?
what mod is it that you use to toggle the chunkloading
for both it is Intricarpet, along with the Carpet Mod. Should be fairly easy to install via most mod loaders.
how do I know when the 1D bore is done?
Does this still work as of 1.20.4? i loaded the world and they just didnt function.
is there a way to make the 2d version faster for the nether becuase of lower netherrack blast resistance?
Add more spacing between the rows, theres a counter for that
I'm attempting to build the 2D tunneler in my SMP server. I took a schematic of it set up to work from the world download and it provides no errors (not even incorrect block states) other than replacing the waterlogged stair with another enchanting table. As far as I can tell all the inventories are filled properly. Yet despite that the scaffolding does not update when the TNT portion shifts under it, leading to the piston not shoving the TNT/observer/deepslate blocks back over and never dropping any tnt. The only thing I changed was adding a redstone repeater at the end of a line leading to a lever, pointing into where the lever usually is. Not sure what to try here.
Edit: Ok, some quick testing shows that with solid blocks the pistons work correctly. Replacing them with TNT again stops it working.
I'm also noticing that the "tunnel length" dropper clock thing is not pushing items between the droppers
Will it work on servers?
@@hastinrhenius193 Yes, if the server doesn't have any mods that cause issues it works perfectly fine - I believe the issue I had was that I had the number of items in one of the setup portions too low.
@@WhytefangYT Thank you so much
where can i get che tutorial of how to do it? and, more important, can i do these machines in my survival world without using any kind of cheat like stop the chunkloading, tick booster, etc?
Can you show how to use this in survival? How to unload the chunk etc? Thanks
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length.
Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one.
flip the lever on the 2D blaster and go into the chunk loader portal
AFK for roughly 1.5 hours, tho id give it 2 just to be safe
pop back through the chunk loader portal.
It should work, if it doesn't, check to make sure you have no mods installed.
to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation)
hope this helped.
Extra tips/requirements:
-Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper
-Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
-If you have modifications, it might not work. Anything fabric, minihud, litematica, or carpet related should be safe, but if you followed all the previous steps and it still isn't working in the test world, try it in vanilla.
-If you want to build it in survival, just reply to this comment asking and ill type up a comment on how to do that. (I saw your comment, I will work on another copypasta for this later, as its late right now)
hey any chance you could help me? ive built this in my hardcore world but i cant get it to work. my setup works if i test it with the tick rate 500 command, but when i wait normally the machine seems to stop making tnt and never blows anything up@@shadowpanther298
@@shadowpanther298yo any u said we can reply for survival tips u got any information?
Does the first design work without the mod that sets interaction chunk loading to false?
it works without it too but you havwe to go very far away for a couple 10s of minutes then come back
How do we use this? Do we build a chunk loader in the light Green square and afk in the nether? Also, if you have ignited tnt in a lazy chunk which has been subjected to an explosion by a TNT in a non lazy chunk, will that that get propelled once loaded into an entity processing chunk? I really had a lot of trouble getting the second one to work in the given wdl. I turned off the explosion damage rile btw but I have no idea where to AFK
[Edit]
Ok, so I've been messing around with the 1D cannon which I managed to get working and the 2D cannon too. In terms of chunk loading, the chunk with the lime concrete floor is the right position relative to all the devices. The 2D cannon is on the corner of the entity processing chunks, bordering 3 lazy chunks. This is what lets the machine achieve the 2nd dimension (i think?). Build the chunk loader and get out of the area I guess. Otherwise, turn render distance down to 2 (simulation distance doesn't matter) and then move away until the lazy chunks are not visible, i.e. the chunks with red floors shouldn't be visible. They're still loaded by the game, coz if you use freecam, you can see TNT fuse particle effects and redstone particles in those lazy chunks. Then basically AFK for as long as possible. You can't really tell when the whole mining process is done without Chunk Debug, which isn't something most people would like using in survival worlds, so just AFK for as long as you can?
Yo ok I tried putting the chunk loader in the lime green chunk, and used intricarpet to turn off chunkloading (It turns it off for the player) but it didn't work. I just afk'd for 10 minutes with the tick rate cranked to 500 (Also with intricarpet) and nothing happened. The tnt stopped appearing in the cannon but also no blocks broke. Idk how thats even possible.
Nvm, a lot of troubleshooting and around 30 changes later I managed to make it work.
@@shadowpanther298 how did you get it to work?
@@orangenal he cba and he probs forgot
Anyways, yeah I messed around with it and got the 2D cannon to work and did a mock build in survival. I didn’t finish coz of reasons but it was easy enough to build.
In creative testing, yes, it’s definitely effective and can easily wipe out a large area in about 30 mins of afk
How do you use the /interaction command? I tried to type in the command, but it wasn't available. I have carpet mod, but it doesn't appear to be a carpet command.
It's from intricarpet
@@_darkvictor_ Thanks! Looks like I'm gonna have to wait for it to update to 1.20.2 tho since the latest version is in 1.19.4
do you have a link for it i couldnt find it@@artemis_furrson
How do you operate this in survival?
how am I supposed to activate the command
it's not showing on my /input
it's says "Unknown or incomplete command...."
plz help
do i need to install a mod or what ?
Hello, will this machine work on paper servers?
Hello, I rebuilt the first drill shown in the video, but it didn't work. TNT just exploded in one place and did not shoot in the right direction. help me please
I saw your other comment. This is almost 100% due to the fact youre playing on paper, which these (And most other technical machines) will not function on. Sorry dude, looks like youll have to use a normal tunnel bore :/
Can you tell me please which mod you use for \ interaction chunkloading
intricarpet
I checked on the server in creative, in the first cannon the trolley loads chunks, the server core is purple, how can this be fixed? version 1.20.1, but in your world it actually working, in other world in singleplayer - not
what mods were you using? is this possible without those mods or commands?
Yes it’s completely usable without mods/commands.
Heres a tutorial for ya. (this is only for the 2d cannon, but chances are that'll be the one you want to test with and use)
Ok so first off, youll want to grab the items from the dropper BEHIND the dropper labeled with "Tunnel Length" Then put them into the dropper labeled Tunnel Length.
Next, put a chunk loader in the chunk one SOUTH of the chunk full of lime green concrete. Turn on chunk borders with F3+G (Dark has a good chunk loader design in his channel, so id suggest using that one.
flip the lever on the 2D blaster and go into the chunk loader portal
AFK for roughly 1.5 hours, tho id give it 2 just to be safe
pop back through the chunk loader portal.
It should work, if it doesn't, check to make sure you have no mods installed.
to modify length, width, and distance between, just follow the instructions on the in world signs. to tell how long it will take, it can found out by using the equation ((24X * Y) + 20x)/1200 = time to wait in minutes, X is the item count in dropper "tunnel length" and Y is the barrel item count/row spacing. (credit to @table5816 for this genius equation)
hope this helped.
Extra tips/requirements:
-Make sure the number of items in the "Tunnel length" dropper is greater than the number of items in the "Tunnel width" barrel combine with the number of items in the "initial offset" dropper
-Installing carpet and intricarpet can help a lot with testing, making use of the "/interaction chunkloading false" and "/tick rat" commands specifically, this can speed up the game and let you run the machine without moving your player.
How do u build this?
i built one of the 1D tunnelers in the nether, and it seems to be working fine except that the TNT is getting downward momentum as well as forward momentum, causing it to warp under the bedrock for most of the tunnel's length. any idea how to fix this?
also, if somebody happens across this comment and is also trying to make the 1D tunneler, make sure you turn off the lower lever before running it, i missed this and it caused me a lot of headaches
there's no reason it should phase through bedrock, y is always processed first and there's blocks blocking the path
@@_darkvictor_ well i dunno what the deal is then. this happens in the original world download too. i *am* playing with some mods, but nothing game changing, and nothing that should affect how TNT behaves
what version are you playing btw
how can i use those commands in my client world not in a server ?
IDk why shulkercraft has many subs while the people like dark ending creditts and emdy and many more doesn't :)
i am reallly looking forward to this thing :)
Doc sent me.......
.....world eaters just got an update.
Tried to build the first design copied it exactly. Don't know why it not working on friends server. He running paper with tnt duping. Just don't know why it's not doing anything when I leave the chunk. Can anyone help me here???
Hellooo :P
From my experience, Paper servers have many more technical redstone problems than simply tnt duping. I believe tnt does not warp into unloaded chunks on Paper servers. There may be other details as well, but to make it work for me I had to convert my server to Fabric (which may not be an option for you).
.
P.s. I may be wrong in the details, but think I got the gist of it. If any technical players know more that'd be great b:
.
Best luck,
Skittles :)
[job experience; built the first one 4 times, and blew up the 2D cannon three times before I got it working]
So - how do you make it work? Does Simulation distance matter, or only render distance? In servers, do you need to take into consideration server side rendering or only client side? The last machine is between 4 border chunks, so in which of the 4 corners do you have to go for the machine to work? You mentioned in a comment that the tnt has to be already lazy loaded for the last machine in the nether, how could you make that happen? Just with a trail of redstone and a lever?
Simplest way is to build a chunkloader 1 chunk away, diagonnaly for the las design, this way you dont have to stay around while it's processing, and yea for the nether, either a redstone line, or an item on a pressure that activates the canon when it despawns, giving you time to leave the area, also i'd suggest putting the tnt last when building this thing, so you dont mess things up
@@_darkvictor_ Thanks a lot! I've managed to make the last design work in creative, but for the life of me I can't make it work in my server - I've built it 10~ times and it always explodes. Is there any mods, or mistakes while building (with litematica) that could lead to explosions?
@@Neonphrenic make sure the chunk alignment is correct, and that you cleared a path for the tnt for 2 chunks in both axis, just like in the world download, also check schematic integrity, block orientation is very important too
is their a schematica for this
Bro this can be used to break into prisons
is this work on 1.20.1?