2007 camry Horn, clockspring diagnose and replacement

warning!!!! this is danger to deal with air bag. please work with caution. i hope my video help guide you to get your car repair. thanks for watching please subscribe.

[@MohdShahman]

Tq Sir. Your guide help me a lot. My Camry 2.4 year 2007 work perfectly

[@Idkgoogleitbro]

Thank you! 2007 Toyota Camry le

[@alltsab]

@@Idkgoogleitbro you welcome 🙏

[@edgarhettrich5863]

When I look up Cockspring for 2005 Avalon it is listed as Airbag Cockspring. Is that the right part to fix the horn problem or is is a dofferent part?

[@static_Tricolor_camry]

The process will be different for me. I'm installing an Aftermarket Woodgrain steering wheel on my 07 Camry. So those T30 screws I won't need to put them back on, because I'm installing an NRG hub kit, and an NRG Quick release. I need to invest in a steering wheel puller though. Also to turn my Airbag light off after installing my new steering wheel, NRG gives you 2 SRS resistors wires, you connect one onto your AirBags. As for the horn, there should be 2 wires that comes with the horn button on your Aftermarket steering wheel, it connects to your quick release.

[@jcortes3930]

I just did one on a 2015 Camry, non of the steering wheel controls worked including the horn BUT the air bag light was not on.

[@Viper-sn5cx]

Do I have to disconnect the battery m if theres no airbag installed? My car was in an accident so its already been used and removed.

[@alltsab]

You probably don't need to but you dealing with electrical for safe side just disconnect for in case.

[@Viper-sn5cx]

@@alltsab ok thank you. Your right just to be safe. And if my steering wheel is slightly misaligned, would this be a good time to "realign" it when i put back the wheel?

[@olsoconeeluxuryservices9092]

Didn't show how to disconnect air bags. Steering wheel didn't come off with the middle nut.

[@joser2011a]

My 2009 Camry horn sounds weak , I am wondering if is the se issue

[@alltsab]

Possible

[@whichgodofthousandsmeansno5306]

I don't think so because from the clock spring it goes to a relay, not the horn directly. See if it does it with the remote. If it does you could have bad horns or bad horn ground, or possibly bad relay contacts. When the clock spring is going bad it will usually not work at all, or work only sometimes.

[@emmanuelwisdom]

Where's the relay

[@tr4ilblazin]

My panic button and horn don’t work you think it’s the clock spring ?

[@alltsab]

According to clock spring bad your panic should still work as you can see in this video. Unplug your horn apply 12volt batter to it to see you have horn sound. Sometimes the horn is dead. Good luck

[@tr4ilblazin]

@@alltsab thanks you bro

[@Dexion845]

Whoever’s watching this, you have to align the clockspring properly while installing it. Oh and don’t waste your money on eBay junk as it likely won’t work

[@blackrooster1527]

Michael 534 thank you

[@mubashwir]

@Michael 534, My Airbag sign is on and 90% time horn doesn't work. Mechanic says I need to change the clockspring. And want to charge more than 850 USD. Can you suggest what to do? Car: Toyota Camry 2012

[@jcortes3930]

Mubashwir Alam easy

[@emmanuelwisdom]

Where's the horn relay located

[@alltsab]

I don't think it has relay

[@emmanuelwisdom]

@@alltsab hmm

[@HN-gj2iq]

No relay, just fuse.

[@aldosaldana1462]

Under fuse it uses a relay integration

[@ironviolin1]

Amazing👍🏻👍🏻