That HL300s has a time period which the HI alert will engage, .Height of Instrument Alert - unit stops rotating when jarred to avoid erroneous readings. For the first five minutes after the laser self levels, the LED lights are solid then flashes every four seconds to let you know the laser is still level and the HI alert has been activated.
I laughed so hard when you washed your hands. I do the same onsite and still think it makes sense. Got a question.. for filling foundation block walls. Can spray insulation be used instead of a concrete pour? Will it be strong enough to hold the wall once backfilled and is it ok with rebar betwee block also? Seems that insualtion is cheaper than concrete where i am, and you get a warmer house also if it works.
Hi there I am not sure but I have heard that yes you can use insulation. I would maybe check and see if there are any videos on that topic. Over here in Michigan we usually grout fill with concrete/grout mix. God bless!
I am getting ready to pour a 12x8 footer. I am going to build a 5’ cinder block wall around it for a koi pond. I live in Michigan and my yard is pure sand. Do I need to do anything special or can I pour the footer right on the sand? I don’t know if I need some sort of gravel in there first?
Hi Scott -- What city are you near? Are you up north or on the west side of the state? Are you doing a spread footing or trench footing? If you are doing a 12" wide by 8" high spread footing, you don't need any gravel under it. You just want to make sure you are at least 42" deep so you can avoid frost from getting under the footing and lifting it. I hope this helps. Make sure to add water to the concrete, as the sand is going to soak up the water fast and it could dry too quickly.
Reality is a Comedy I am in Monroe county. On the Ohio state line. I have a hole dug 48” deep. The footer will be at the bottom of this hole. I was going to go down 8” and make it 16” wide and reinforce it with 2-3 pieces of rebar along it’s length. Then build the block wall on top the footer with rebar standing up every 4 feet to reinforce the walls. The top of the wall will be 1 foot above ground and the rest buried. God bless and thank you for the help. I really don’t know what I am doing but I am trying to figure it out. My son and his girlfriend are first responders and they are getting married at the end of august and I was hoping to have it done before then. And I turned 50 last week so it’s a gift for myself as well. Hahaha
Yes that sounds good -- No gravel needed. I hope the project goes great! I'm near Ann Arbor. If you have any more questions feel free to email me at angeloandsons@outlook.com -- Have a blessed day!
Go a question when measuring with Lazer level for footing and you are finding different height of slope when you do you put more concrete or don’t dig as deep on lower end to make the footing level before you put the base of blocks or how to make level
You can step up the footing with the grade. Make sure to step up in proper block height measurements so it will land properly. Keep the footing level and then step up as the grade gets higher.
@@joemoritz4420 Is this a trench footing? I usually do not do any forming. All of my work is earth formed. I am located in Michigan - they may do it differently where you are located.
@@joemoritz4420 If you are doing a spread footing, yes you would need to form it in the height of blocks/bricks so that it will gradually go up with the grade, leveling off each step. This way everything will line up when you go to lay the brick/block. Make sure to take into account the mortar joint also.
Yes it’s a trench I just know the ground by house is higher then where the back of my add on will end so I was thinking that maybe not dig back end a little shallower
The last part of you explaining how it’s gonna be ok is exactly what I needed. Thanks
“The barn is cleaned up and ready.” Lol! You guys kill me! We hope that you’re both doing well too!
Man we’ve missed you! Glad to see another video hope you keep them coming. God bless and be safe!
God bless you too my friend. Stay well!
Can’t wait to see more footer and block work videos!
That HL300s has a time period which the HI alert will engage, .Height of Instrument Alert - unit stops rotating
when jarred to avoid erroneous readings. For the first five minutes after the laser self levels, the LED lights are solid then flashes every four
seconds to let you know the laser is still level and the HI alert has been activated.
I’m on a job right now doing foundation work to move a house on how do I work the laser
I laughed so hard when you washed your hands. I do the same onsite and still think it makes sense.
Got a question.. for filling foundation block walls. Can spray insulation be used instead of a concrete pour?
Will it be strong enough to hold the wall once backfilled and is it ok with rebar betwee block also?
Seems that insualtion is cheaper than concrete where i am, and you get a warmer house also if it works.
Hi there I am not sure but I have heard that yes you can use insulation. I would maybe check and see if there are any videos on that topic. Over here in Michigan we usually grout fill with concrete/grout mix. God bless!
Is it the same with bricks
Stay safe Angelo! 👍🇨🇦
I am getting ready to pour a 12x8 footer. I am going to build a 5’ cinder block wall around it for a koi pond. I live in Michigan and my yard is pure sand. Do I need to do anything special or can I pour the footer right on the sand? I don’t know if I need some sort of gravel in there first?
Hi Scott -- What city are you near? Are you up north or on the west side of the state? Are you doing a spread footing or trench footing? If you are doing a 12" wide by 8" high spread footing, you don't need any gravel under it. You just want to make sure you are at least 42" deep so you can avoid frost from getting under the footing and lifting it. I hope this helps. Make sure to add water to the concrete, as the sand is going to soak up the water fast and it could dry too quickly.
Reality is a Comedy I am in Monroe county. On the Ohio state line. I have a hole dug 48” deep. The footer will be at the bottom of this hole. I was going to go down 8” and make it 16” wide and reinforce it with 2-3 pieces of rebar along it’s length. Then build the block wall on top the footer with rebar standing up every 4 feet to reinforce the walls. The top of the wall will be 1 foot above ground and the rest buried. God bless and thank you for the help.
I really don’t know what I am doing but I am trying to figure it out. My son and his girlfriend are first responders and they are getting married at the end of august and I was hoping to have it done before then. And I turned 50 last week so it’s a gift for myself as well. Hahaha
Yes that sounds good -- No gravel needed. I hope the project goes great! I'm near Ann Arbor. If you have any more questions feel free to email me at angeloandsons@outlook.com -- Have a blessed day!
Reality is a Comedy I emailed you from my iCloud address
Can you show us how to set up for bricklaying worksite
Go a question when measuring with Lazer level for footing and you are finding different height of slope when you do you put more concrete or don’t dig as deep on lower end to make the footing level before you put the base of blocks or how to make level
You can step up the footing with the grade. Make sure to step up in proper block height measurements so it will land properly. Keep the footing level and then step up as the grade gets higher.
So make the concrete forms kinda look like steps in the height of bricks
@@joemoritz4420 Is this a trench footing? I usually do not do any forming. All of my work is earth formed. I am located in Michigan - they may do it differently where you are located.
@@joemoritz4420 If you are doing a spread footing, yes you would need to form it in the height of blocks/bricks so that it will gradually go up with the grade, leveling off each step. This way everything will line up when you go to lay the brick/block. Make sure to take into account the mortar joint also.
Yes it’s a trench I just know the ground by house is higher then where the back of my add on will end so I was thinking that maybe not dig back end a little shallower
Hello sir u earned my sub!
Hey David great to meet you here! I hope you have a blessed week my friend.
@@RealityisaComedy Thank u ur very skilled in ur trade great work!
@@DavidRodriguez-wd2sz Thank you my friend! Where are you from? God bless!
@@RealityisaComedy Hello I’m from Southern California I’m a home owner I get ideas from skilled humans like u..
I love concrete.
7:20 it's the common cold , move on
Totally agree! Utter bull! Stop conforming.