How to convert an Einhell Cordless Grass Trimmer from Blades to Line cutter 🌿

Sdílet
Vložit
  • čas přidán 21. 08. 2023
  • This might work for other brands and models too!
    This is the exact model I used: www.smart-mag.ro/cumpara/moso...
    rogmg.com/product/tambur-moto...
    www.heber.ro/motocoase/tambur...
    Original trimmer review video here: • How to convert an Einh...
  • Věda a technologie

Komentáře • 15

  • @UltimateDIY
    @UltimateDIY  Před 10 měsíci +1

    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    THANK YOU FOR WATCHING!
    PLEASE LIKE AND SUBSCRIBE!
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

  • @stevejohnman68
    @stevejohnman68 Před měsícem +3

    I find i have lot of problems with wire breaking often and not feeding out properly. I wanted to change mine to blades! I have no concrete edge so should be good. Im supprised einhell dont offer option to swap to which you prefer.

    • @UltimateDIY
      @UltimateDIY  Před měsícem

      Yes, that would be best, to be able to choose what works best for your particular case.

  • @fabricioaffar5953
    @fabricioaffar5953 Před 5 měsíci +1

    Great video! I allways wanted to do rhis, but was not sure if it would work. Thanks for sharing.
    Einhell should sell an original comverting kit like this!!

    • @UltimateDIY
      @UltimateDIY  Před 5 měsíci +1

      Yup, agreed. But probably they have a comercial advantage to separate blade and wire cutters.

  • @KEEVVY
    @KEEVVY Před 2 měsíci +1

    Nice hack I know the original plastic blades are kind of expensive in our country, but I think they cut better than wire,I was able to cut tall grass from a entire grapevine on nyktek channel 😅

    • @UltimateDIY
      @UltimateDIY  Před 2 měsíci

      They do cut marginally better, but create much more vibration. So it's a tradeoff. But my goal was to be able to cut next to objects without destroying them and wire can do that, but blades not really. They literally ripped chips of concrete 🤭

  • @riazam493
    @riazam493 Před 10 měsíci +2

    Frumos, am invatat ceva. Cred ca ai nevoie de o imprimanta 3d la cate chestii DIY faci.

    • @UltimateDIY
      @UltimateDIY  Před 10 měsíci +1

      Zau...si eu ma tot gandesc sa iau una. Ar simplifica mult unele proiecte.

  • @raduszilagyi6055
    @raduszilagyi6055 Před 23 dny +1

    Salut. Vreau să ii iau mamei mele acest trimmer pentru grădinuța ei, si pe margini în grădina mare. Ți se pare mai eficient cu firul sau cu lamele din dotare?
    Are pavaj, beton etc și am impresia că ar distruge destul de multe lame

    • @UltimateDIY
      @UltimateDIY  Před 22 dny +1

      Salut. Eu as cumpara direct un model cu fir. A mea e mai putin eficienta cu firul, dar se consuma mult mai incet si nu distruge nimic in jurul lui.

    • @raduszilagyi6055
      @raduszilagyi6055 Před 22 dny +1

      @@UltimateDIY mersi pentru răspuns 😀

    • @UltimateDIY
      @UltimateDIY  Před 22 dny

      Pentru putin 👍🏻

  • @elissutza
    @elissutza Před 2 měsíci

    Eu nu am acel surub in mijlocul bobinei originale ,nu o pot scoate😢 este vreo smecherie?

    • @UltimateDIY
      @UltimateDIY  Před 2 měsíci

      Este acelasi model cu a mea? Cu lame din acelea rosii?