"CRAZIEST!" Arrma Mojave EXB bash yet?! IMPORTANT tips and Upgrades!
Vložit
- čas přidán 27. 08. 2024
- -Check out 3 Sons RC M2C rear tower brace install!
• Most Important Arrma 6...
- E-mail for Anthony Jagielski if interested in a custom fan.
ajagielski@hotmail.com
-Link to M2C Racing Mojave upgrades!
m2cracing.net/...
Out for a run with the Arrma Mojave EXB testing out a SUPER strong custom fan and also the front shock limiters I installed. Excellent mod for stopping the front shafts from popping! Had a total blast sending off the mega mounds and flat ripping around! The truck is such a battle axe and a beast bashing! Thanks for watching!
@ARRMARC #ARRMARC @HorizonHobbyProducts #ARRMAMOJAVEEXB
Says “ I don’t really take this truck off big jumps” absolutely sky’s it around 5:25 🤣🤣
Well ya know, gotta live in the moment!😱🤣🤣
I was literally coming to the comments to type this hahaha
I love that you said i dont really send this truck for huge air then you just send it.. Great bashing bro!
He means 200ft jumps 😂🤣
Exactly what I was thinking.... Seems legit🤣
😂 I’m thinking, did he just say he don’t jump it too much or was that another video I just watched
“I don’t really jump this truck...” 🤣
Love the "small air" you gave that aircraft!
Yup.. extreme compression popping front CVDs. To fix the rear; front CVDs from arrma or GPM fit just fine. When you get the front CVDs into the rear you'll have the option to drill new holes into the shock tower and achieve lower droop for rear arms up to 1/2inch to keep rear wheels in contact with the ground with no issue of popping rear axles =performance gains👍😁
Friggin SICK Brother Eric 😜!!!! Great job on the bench too 👍. Stoked the limiters stopped the shafts from going wonky and pulling out. That fan is definitely jet engine blower 😱🤣🤣. No problem pushing air now. Nice work on getting it mounted 👌. Huge props to Mitch for letting us bash how we want 😍. Another Killer session my friend. Definitely looks like a hoot. I feel the same way with my Senton 4s 🤗🥰🥰🥰. Not the best aero, but doesn't matter when you can't stop smiling. 🍻🤙🤙😎💪👊👊
Thanks Brother Rich!👊The Mojave is a whole different level experience and fun factor for sure! Just like anything, once tweaked, tuned and upgraded a bit in key areas, it's a total beast! I was skeptical of mega mound launching her for sure!😱🤣Going the other way was into the wind and sketchy but she floated down nice!😜Yeah adding limiters completely solved my driveshaft issue!🤗First bash since I've had the truck, not the first pop of a shaft! Mitches Exb Outdrives helped too!💪💪Felt good to rip this big girl again! Thanks for your comment and watching bro!😁👊💪🚀🚀
Very fun durable rc’s. I have a non EXB with a hobbywing max6 1650kv 8S stock gearing. I can’t get it to top speed, wants to take off in the air. Wheelies at all speeds. I haven’t taken it bashing yet. Just tested on the road. I’m sure it will be an animal off road! AWESOME VIDEO as usual! Yes installed the m2C wheel nut extenders. Thank you!
Your vids are as informative as they are bad ass. Keep up the good work brother!
That was some huge jumps! As if I needed another reason to pick one of these trucks up.
I put M2c front and rear hinge pins after seeing your videos and man you’ve upgraded my hobby for sure
You said this truck didn't do big jumps and I'm thinking what's it for? Then proceeds to to huck to flat 30x
Well done Eric , you got her dialed in nice ! thanks for the tips brother , always appreciate your time 🤘😎👊🏻
Killer run brother!! This truck is an absolute tank!! Keep on keeping on 🤟
I did all my upgrades of m2c and am running a Hobbywing Max 6 w the 1650 kv motor and it flies!! I had to put 90 in the rear shocks as the weight w the motor was so heavy. I live when you say you don’t do big air w the Mojave, then 45ft jumps in the video!😂😂
This guy ready to go to Mars
crazy power and durability 🤯
Love seeing the Mojave taking on some Kraton sized jumps!
Wasn't planning on doing it but I just cant help it!😜🤣👊🤘🤘
Now i must say old chap, i'm 3/4 in to this "Bashing", and i must say, i am thoroughly enjoying myself, A royal bashing, indeed, very well then young man, bravo, i do say bravo!!!
Another awesome bash video man. I just finally got mine out today for a good run, the first time i took it out the 16t pinion wasn’t enough for my 1650kv motor. I put a 22t pinion now and this thing its a beast of a truck I definitely need to find me a place like that here in Florida to bash around. Keep up the good content man love ur videos. Ill be posting one of mine soon.
I know I’m late to the party but I just got my Mojave exb delivered today 😎😌🤟🏼along with a few m2c goodies for it 🤑
Watched all of your videos on this truck before I made the purchase and I’m glad I did man 🤟🏼🤟🏼
I never thought an RC would win over my heart so easily. My maxx did. and first rip with my mojave EXB is so awesome Im getting my brother one!
Add to cart!!!!!!
I’m running 100wt in all 4 corners. I’ve tried everything and I found 100 to be the best.
Awesome. I dont bash like that. But amazing it keeps going after launching it.
This guy ahhh Hank Williams RC GURu😁
Only thing holding me back from getting one is the new diffs!! Awesome viedo!
Great video Eric. Got my Mojo EXB last week, so thanks for the great tips. I've put the Scorched Parts inner guards on so hopefully won't get as dirty lol. Thanks again for the great content brother and happy bashin' 👍😎👍
Awesome video.
Thanks Bro!😜👊👊🤘
Cool bashing,great upgrades and tips
Every time I see you run a different rig it makes me want to buy one😂 Another great video brother💯 keep up the good work!👍
Doing a hardcore jump with a short course rc...😱😱 It’s great, Eric.👊👊😎 You watched a great video.👍👍💪💪
Thanks bro!👊Yeah totally sketchy jumping a 1/7 scale dessert truck but it was a blast!😁💪🤘🤘
For not really jumping it, you really jumped the hell out of it lol. Awesome video!!!
Change of plans!🤣🤣
🤣🤣🤣 Send it dude!!!
Good job sir, I've never seen the Mojave take such a beating 😁👍
Massive air time with the drop off jumps truck is a beast man
Poor Anthony, his inbox has blown UP!! LOL Great video Eric, keep them coming!
Another great video, keep em coming 👍
Hello from Denmark.
Great video.
Great truck. I love mine.
the fan is mega pog
I just got my roller. Putting electric s in her now 2200kv Taurus motor 24 pinion max6. 6s power i cant wait to run it. Nice video. My stering arm didn't fit on my servo. So i replaced mine. If billing u guys may run in same problem
Dude this video makes me want a Mojave so bad 😳👍 such a tank!
Wicked bash bro. 👊
I’m not really a sct fan but the more vids I watch of these Mojave’s, I think I need one... 🤣
Keep the sweet vids and awesome tips coming brother. 👍😎
"Yeah Dude"!!!
Love your content bro
Thanks!!😎👊👊
Wow this things 🔥🔥your vids are honestLay the best on CZcams you send these cars properly 💯💯
I really appreciate that man!🤗Just having fun!😎💪🤘🤘
Yeah keep uploading I love watching your videos 👍👍
Damn that thing was flying! You're making me want to pick one up more and more with every video 😂😂
No, I don't really get big air with this truck.😉🤣😎..That was really sweet. It just sailed a few times there. I seen what you were saying about it getting sideways. It took it all though. It dead stopped from 1 of those jumps to. Great job. Great video! Just Awesome!
Thanks so much Jessica!😊It did have some sketchy launches but floated down!🤣She took some serious abuse!😱😎👊👊🤘
Wow! Thing got some air lol
Man im sure these jumps were close to the biggest iv seen from any of your cars!
When it catches the air just nice it is absolutely b.e.a.utiful 😆
Smashing it Dude🤘
Oh and took your advice and got some 80w and 100w for my HPI flux truggy, cheers man 😁👍
Who ever gave this video a thumbs down is crazy. One of my favorite you tubers
Nice ripping and jumping!
Thanks!😎👊🤘🤘
Awesome
I have a problem with the fan setup. The fan is pushing loads of air but it can only cool the tiny heat sink provided.
Surely the fan blowing over the whole motor would be a better solution.
Put some holes through the heat sink so more air can reach around the motor can. I don't have one but it makes sense to my eyes and thinking.
Nice Eric sick run....
Thanks Gerald!😎👊
Great rundown Eric! I set up my rtr Mojave similar to you, really great tips there 👍👍 The Talion shocks have a bushing on the end of the shock shaft to limit travel as well. Loved how you just launched that bad boy!! I know what you mean about it getting sideways 🤣 I busted a shock on a sideways landing, that's when I realized you can't send the Mojave when it's windy 🚀
Thanks Aaron!👊Yeah adding the limiter helped so much! Not the first popped driveshaft! The M2C Outdrives added to the security!💪💪Yeah I was skeptical of sending her off that huge mound at full speed but she took it!😱Definitely have to pilot her down in the wind but just adds to the laughs and makes it a hoot to drive!😎👊🚀🚀
I would also love to have the tools to do some shock work. You want more rebound, however I have never seen a shock piston that can do such a thing.
It is possible to put a one way valve over a couple of holes so under compression the flap closes but on rebound they open allowing more oil to flow through allowing the wheel back onto the ground faster.
Got back into rc big in june .picked up the revo 2.0 the the only following week the kraton exb loaded it with max8 and 2250 kv .Unfortunately rear diff.went south second set of batts.Its still down because cant get the parts.Just picked up the mojave exb.Anyway found your videos on the exb kraton awsome with your mind blowing launches .I go straight to your videos to see what you currently bashing.when you give your thoughts on and you like it. I consider that truck PROVEN.
I gtta get me one of these soon!!
This area reminds me of Valley Springs lol
The EXB Mojave is now the only Arrma in own... not because the others are bad, but because this truck is SO F%#KING BAD ASS!!!
I absolutely flippin love mine. Need to work on my cooling solution. But it's passable for now.
Great video and tips fam 💪🏾💯
Great video🔥💯
Yessss..... Need this in my lfe
Appreciate the Mention Eric👍😉
Them Tower Supports are my favorite upgrade for the 6s line!
Eric: "I don't really send the Mojave like big air style"
..... Proceeds to send it 10 times full speed of a 40 ft mound 🚀🚀🤣😂👍👌
Love the shock limiter tips... I'm gonna do this if muly shafts start popping. Gotta get my electrics in my Mojave EXB brother..... Time to go full send!
I might do plenty of Installs... But you know I like to go full 🚀🚀 as well.... Yeeeee
Killer stuff brother, love yiur diff setup, she was sliding drift style 👍😎
See ya round brother
You're a nutter mate haha "yeah I dont really jump the Mojave like I do my other trucks" lol
Your truck handles air well, doesn't seem to parachute so bad, mine is shocking lol
As soon as I see the airtime I went to comment and see that’s exactly what everyone else thought.
Awesome !
Sweet video as always brother!!!
And try some 70 weight shock oil..
Keep on having fun and making dope ass videos!!!
Haha I thought you don't send this truck off big jumps. Such a beast
Awesome bash thanks for posting. Point 2 of those fans downward for increased air ?? Lol
I have a Mojave EXB, with all Spektrum electronics (motor, ESC, receiver). I also use Spektrum Smart batteries. I have never popped out a drive shaft, the EXB stock shock towers have taken a beating and have not bent. I think you have over powered this Mojave - causing a lot of your issues. The only weak spot on this RC is the Shock support. A little drywall tape and Shoe Goo, still flexes but have not broken one since.
Hello my friend. I just want to verify that you’re the one who messaged me about my Ebay store wghhowwil. Thanks buddy!
Not sure if that's god or bad! What was it about?😂
@@RCDUDE81 Haha you tell me
@@RCDUDE81 Someone on Ebay claiming to be RC DUDE81 wanting me to send parts to use in videos. Is that you or a scam?
I've never asked anyone for parts🤔😱Might be a scam!😝 Do you know the Ebay account or seller name?
@@RCDUDE81 kxnn_34
Great vids brother!
Seems like your audio is louder in the right ear than the left ear. Anyone else notice this? I've checked other videos, as well as my mixer and I don't think it's my hardware.
Anyways, keep on bashing man!
Thanks so much bro!😊Not sure on the audio🤔Are you using head phones? I'll check into it thanks!😎👊
@@RCDUDE81 Yes sir. Seems to be affecting your other videos as well. I confirmed with different audio sources and other youtubers and the audio is good. Maybe something in post processing or your editing software that might be shifting the audio more to the right channel.
Great video bro 👍#305 🎄🎄MERRY CHRISTMAS🎄🎄
Genius speaking you listen
Lmao you said you don't jump that.... sending it in the video....after getting the Senton3S BLX I'm wanting the Mojave EXB now
🤣Couldn't help myself!😜
Killer video as always brother E, made my day , to wake up to this 🤗..she sure is a TANK, and handles so well for a sct/des truck 🤗🤗🤗, thoose ORBIT jumps aint of this world ❤❤. Me personal do not like the limit in the shocks, even if they dont do any harm, i remove one clip on camber, and look over so i still got the right angle, it will drop a mill or 2, but no more issiues, same on the EXB Kraton 🤗
Seen it 2wice..and wtX brother Eric 😂, you just ruined my day..i wanna go home and skip work and run the Mojave EXB instant 😂😂😂
Your video is still super! Last year (march) I bought my Mojave EXB after watching your video. I didn´t top the diffs with oil since I don´t have a bench to work and was a bit lazy too. I took her on some blasts but nothing crazy. After some rides i got too less grip on the rear axle until it almost didn´t move anymore. I think the central or back diff has a problem. Could it be the slipping diffs? I hope nothing is broken but it should be in warranty time. Any recommendations? Keep bashing! :D
Damn!
Sick run brother, what are you getting for run time?
Bad ass...
What kind of servo do you have?? Great video's!! Im going to build one. Thinking of putting the max 6 combo 1650kv,thoughts???
Thanks man!👊I'm running a PowerHD 23 kg. Basically my go to bashing servo. That Max6 combo sounds great!👌
What other aftermarket umpers are compatible with those vitavon aluminum diff cases with aluminum hinge pins. My stock front bumper won't line up now
RC cars have come so far.. having to break in your nitro motor.. always having that oily mess. Amd most trucks and cars breaking everytime you drove them. Cars like the mojave or maxx are just so durable compared to the old stuff
Since you have tested both which you one do you like it more, the Anthoiny fan or game changer ones? I'm running a max 6 combo in my Kraton EXB with a 19T and I'm getting hot. just running a pack of SMC 8000 Mah 125C. it just shuts off after 30 mints of running. I'm Running on grass, that's all i have around me. ESC looks fine but motor is hot to the touch.
Another awesome video Eric!
If you need any other fans just let me know
Happy to hook you up
Loving the air with the Mojave!
Anthony
Thanks buddy!!😎👊
"I dont super jump with this truck".....*proceeds to jump tf out of it.
Seems like the exb or after market is a must on the Kraton, but does it really add anything other than weight to the Mojave? Seems like the Mojave 6s handles better? Did you notice a difference?
you got the M2C dual-nut-system.....but it has been said the EXB-nuts don't come off.....or did they?
Yes same issue with the wheel hub. These extend out 2mm to stop the rubbing wheels on the hub which will loosen the wheel nut. The double nut just ensures they don't back off!
You didn’t add link for fans in description awesome video #rc4lyfe
You have to email him. I added his email address in the description!😎👊
Love the video! Do you have any issues with jumping the Mojave and controlling in air? When launching it sometimes feel like it doesn’t respond to brake or throttle to level out the truck when landing. Any suggestions? I was thinking tire change would help for more rotation. Running the maxx6 1650, 60,000f, 500,000c, 30,000 rear. Appreciate any suggestions. Love the vehicle
Thanks!👊The Mojave by design isn't really a big air stunt truck. It does have a little correcting control if setup right. Sounds like your diff setup is great! What gearing are you running? I find staying in the throttle off jump faces help! If in a nose dive, only a frontie save will save it!🤣Bigger tires will help greatly as the Mojave tires are small for the weight and length of the rig. Not a lot of rotational mass. The Mojave is a pure drivers car! So much fun!😁👊🤘🤘
@@RCDUDE81 thank you!! I was running a 20t, just purchased a 23t for it to get little more top end. Not sure if larger tooth will help with little more air control? This thing is a blast, can’t help but air it out. Ordered the m2c hub extenders and will try little bigger tires as well. Thanks for the content, know it’s a lot of work. My brother and I have a small channel and love to race and air our vehicles. Thanks for the awesome content.
Anytime bro! Yes a bigger pinion will help! More rpm will be more wheel spin!
Have you tried plumbers teflon tape on the wheel hexes?
No I just use the M2C upgraded hexs and wheel nuts.🤘
I gotcha bought and paid for by m2c. Well poor people like myself who don’t get free stuff use teflon plumbers tape and my wheels never come loose.
🤘🤘🤘🤦🏻
I don’t think the max slash could survive that.
Thats how you drive the Mojave 🤘 How do you always find the best bashing place's on the planet!!! Do you life in Cali my brother?
Thanks bro!!😎👊Its a ground shredding beast for sure! I happen to have lots of construction in my area!😜I'm on the East coast!😁💪🤘🤘
I think the v5 mojave has stronger body posts if you want to switch to those
What do you do to always land the right way
Im not an expert doing jumps and I usually fall either on the front bumper or upside down
Any tips?
Well air control is done with the throttle and brake controls. Throttle in the will bring up the nose and brake will bring the nose down. The Mojave is bit tricky with the smaller tires. Not a lot of rotaing wheel mass for fast corrections. Staying on throttle off jumps helps too then brake right before you land. Just takes practice!!😁
@@RCDUDE81 Thanks bro I appreciate your time!
You say you dont jump it much haha 50ft jumps WOW
Hello from Russia! did you change oil or springs for such a bash?
Will it be worth changing the pistons in the shocks if you are already running the current m2c setup when this new one drops?
We'll have to see how it does compared to a stock M2C setup. I'm just worried about piston hole size using a lighter fluid. I'd like to be able to use stock wt but we'll see!😎👊
Wrap your body mounts very tight with electric tape, never broke a set after that. Gread video, keep it up💪
Good tip! Thanks so much!😎👊💪💪
Yessir no problem bro👌
Kraken vs Mojave witch one would you pick if you had to
Kraton since its a more well rounded basher. The Mojave is fun in its own right though being more scale and tough af!
@@RCDUDE81 thanks my wife is making me pick one out of the two want both not happening anytime soon so I guess its time to unleash the kraken lol
I destroyed one of my batteries using a fan like that. I had it plugged into the battery balance plug and there wasnt any cutoff at min voltage so the battery discharged too quickly running the fan and the esc on the truck. I was thinking of running a standalone battery but how do i keep it from killing the battery?
Yeah I don't recommend running off the truck lipos. I run a small 500 mah 2s just for the fan I strapped down in the truck. Same for the Game Changer fans I ran in my latest Kraton vid. I ran a small 1300 mah 3s just to power the fans. I had the same issue like you one time and almost ruined my pack..👀
@@RCDUDE81 yeah the truck kept cutting power and finally wouldnt move after a couple reset. Low and behold i took one of the batteries out and was super swollen. Is there something you know of that i could hook up to this and keep it from killing another battery?
I would run an small 2 or 3s pack just for the fan like I mentioned above. They are small, light and easy to fasten down in the truck. I'd recommend going that route instead of using one of your truck batteries.
@@RCDUDE81 i get that but doesnt draining lipos down all the way cause damage or?
I just had to listen to my fans. If they sound like they are slowing down, the lipo is probably at lvc.
🤘🏼😈
Trying to buy a fan but email isn’t good