Daniel88 yes its common to almost every one. The problem isnt the heat or the screen! Its an issue with the negative earth clamp on the battery not gripping tight enough when the terminal clamp expands. And the earth between the battery terminal to the dashboard earth. The fix is to reaĺy clean the battery negative terminal AND adjust the terminal clap with some pliers so that it grips the terminal extremely hard. And srcondarilly, put an extra earth from the dashboard frame to the body. You can almost use the screen dimming as a battery voltage checker/ earth check. 407's are battery hungry. A new one every 3yrs almost sorts the problem. But it still goes back to the battery terminsl
I got the same replacement display as you and noticed that the CD changer display was missing but this was fixed with PP as it appears that the car's features like bluetooth, parking assist etc have to be enabled on the screen. My screens software is an earlier version v50 something, but I did gain an extra PLIP feature by adding the replacement screen.
Hi Daniel...I bought a 407 a few weeks ago and yes my display is crap too, I don't think I would replace it I would rather buy a whole new car strereo/display...that is if you can still buy car stereos these days. Also I cannot believe how there is no accessories switch on ignition and I had a flat battery the other day and you cannot open the boot. The designers of these features need a good kick in the arse Anyway thanks for the video
Maybe the boot is Permanently Locked from main menu (displayed on the display that i'm talking about ) it's an option *Boot Permanent Locking* . Press MENU button on your stereo , then go to PERSONALISATION-CONFIGURATION , press OK , go to DEFINE VEHICLE PARAMETERS then ACCESS TO THE VEHICLE and Un-check the BOOT PERMANENT LOCKING box . If this is already done , then open from Key Fob remote firstly and after it should work from *0* button (407) After changing the battery , first time when you switch the ignition on you will need to hold down the DOOR LOCK button on your key for for 10 seconds so the car **reads** the central locking . . You will also need to fully open your windows by holding down *window's opening button * until the windows are completely open , and after that close all the windows by holding *window's close button* until the windows are completely closed . do this for all windows preferably 2 at a time . (do this if the windows / boot will not work properly after connecting the battery ) And do not buy another stereo (like the factory fitted) with complete display as it does not worth . These Stereos found on Peugeot's are Coded to work only with the current vehicle that they are fitted on . If you buy another stereo make sure is **decoded** as otherwise you'll have to pay another £40 - £80 for decoding in order to work on your car . Hope it helps . Cheers
Thanks a lot for your very detailed response Daniel. I managed to get back to normal after this: rps-mobile-car-mechanic.co.uk/peugeot-citroen-bsi-reset/ Got the car radio going and windows etc...to be honest I expect electrical problems down the track with this car...I dream of the day I can walk into an Audi dealership and buy a brand new top of the range. We always have to have something to aspire to eh? Anyway good luck to you and keep YouTubing
Of course u have this anomaly because u have to initialize that display ( to show u all options) with PeugeotPlanet2000, that display u bought is fine u just need to configurate !!!!
wow , something that i didn't know . I have Peugeot Planet 2000 But i don't understand why it is not working on WINDOWS XP SP3 . Will try to install on WIN7 . Tried on WIN8.1 with compatibility mode for WIN-XP / 7 and not working. I was only able to use DIAGBOX Thanks for info
You're welcome. . Just checked and found the link of the display i bought in my purchase history. (came in 2 weeks from china) www.aliexpress.com/item/Pulchritudinous-307-big-408-triumph-c5-chinese-bombards-display-orange-tool/789730362.html?spm=a2g0s.9042311.0.0.OCuZrt
if u want to instal pp2000 on win7 u have to make first an virtual os (xp) with virtualbox because pp2000 runs only on xp. I have an 407 and mi pp2000 runs on win7 but on an virtual xp made with virtual box.
+THE STIG By the way i just used DiagBox on windows 8.1 Pro x64 and i was able to configure the display , Ecu , Cruize Control etc .. (thanks to you i was able to add the missong options and now i have full functionality) Thanks alot again for this info
Daniel88 yes its common to almost every one. The problem isnt the heat or the screen!
Its an issue with the negative earth clamp on the battery not gripping tight enough when the terminal clamp expands. And the earth between the battery terminal to the dashboard earth.
The fix is to reaĺy clean the battery negative terminal AND adjust the terminal clap with some pliers so that it grips the terminal extremely hard. And srcondarilly, put an extra earth from the dashboard frame to the body.
You can almost use the screen dimming as a battery voltage checker/ earth check.
407's are battery hungry. A new one every 3yrs almost sorts the problem. But it still goes back to the battery terminsl
do you know anything about the date and time automatically resetting after every start?
Hi daniel can you explain how & where you do second earth cable for the Noobie please?
If that’s the case why does a new screen work well?
I got the same replacement display as you and noticed that the CD changer display was missing but this was fixed with PP as it appears that the car's features like bluetooth, parking assist etc have to be enabled on the screen. My screens software is an earlier version v50 something, but I did gain an extra PLIP feature by adding the replacement screen.
Hi Daniel...I bought a 407 a few weeks ago and yes my display is crap too, I don't think I would replace it I would rather buy a whole new car strereo/display...that is if you can still buy car stereos these days.
Also I cannot believe how there is no accessories switch on ignition and I had a flat battery the other day and you cannot open the boot.
The designers of these features need a good kick in the arse
Anyway thanks for the video
Maybe the boot is Permanently Locked from main menu (displayed on the display that i'm talking about ) it's an option *Boot Permanent Locking* .
Press MENU button on your stereo , then go to PERSONALISATION-CONFIGURATION , press OK , go to DEFINE VEHICLE PARAMETERS then ACCESS TO THE VEHICLE and Un-check the BOOT PERMANENT LOCKING box .
If this is already done , then open from Key Fob remote firstly and after it should work from *0* button (407)
After changing the battery , first time when you switch the ignition on you will need to hold down the DOOR LOCK button on your key for for 10 seconds so the car **reads** the central locking . .
You will also need to fully open your windows by holding down *window's opening button * until the windows are completely open , and after that close all the windows by holding *window's close button* until the windows are completely closed . do this for all windows preferably 2 at a time .
(do this if the windows / boot will not work properly after connecting the battery )
And do not buy another stereo (like the factory fitted) with complete display as it does not worth . These Stereos found on Peugeot's are Coded to work only with the current vehicle that they are fitted on .
If you buy another stereo make sure is **decoded** as otherwise you'll have to pay another £40 - £80 for decoding in order to work on your car .
Hope it helps .
Cheers
Thanks a lot for your very detailed response Daniel. I managed to get back to normal after this:
rps-mobile-car-mechanic.co.uk/peugeot-citroen-bsi-reset/
Got the car radio going and windows etc...to be honest I expect electrical problems down the track with this car...I dream of the day I can walk into an Audi dealership and buy a brand new top of the range.
We always have to have something to aspire to eh?
Anyway good luck to you and keep YouTubing
Icarus Hola soy Daniel mi carro Peugeot 407 marca la temperatura q hacer.
very helpful, thankyou
Adam Tooms n
Of course u have this anomaly because u have to initialize that display ( to show u all options) with PeugeotPlanet2000, that display u bought is fine u just need to configurate !!!!
wow , something that i didn't know .
I have Peugeot Planet 2000 But i don't understand why it is not working on WINDOWS XP SP3 .
Will try to install on WIN7 .
Tried on WIN8.1 with compatibility mode for WIN-XP / 7 and not working.
I was only able to use DIAGBOX
Thanks for info
I got the same display as you from eBay and had to use a very recent version of DiagBox to configure it.
Mulțumesc
Hi, where did you buy the screen? I can't find one.
dogballs99999 Hello. On www.AliExpress.com you will find many . Make sure to check the review's to buy the good one and not the Black-out one .
You're welcome. . Just checked and found the link of the display i bought in my purchase history. (came in 2 weeks from china)
www.aliexpress.com/item/Pulchritudinous-307-big-408-triumph-c5-chinese-bombards-display-orange-tool/789730362.html?spm=a2g0s.9042311.0.0.OCuZrt
My dad had his car
you should have shown how to take it out first
I could do that if still needed
Gdje mogu nabaviti ovaj displej?
if u want to instal pp2000 on win7 u have to make first an virtual os (xp) with virtualbox because pp2000 runs only on xp. I have an 407 and mi pp2000 runs on win7 but on an virtual xp made with virtual box.
Thank.s alot .
+THE STIG By the way i just used DiagBox on windows 8.1 Pro x64 and i was able to configure the display , Ecu , Cruize Control etc .. (thanks to you i was able to add the missong options and now i have full functionality)
Thanks alot again for this info
De ce ai pus folia aia de aluminiu?
I am facing the same problem.
Salut Daniel
Scrie-mi te rog de unde l-ai achiziționat și cu cât
Salut! Ai aflat de unde a fost achiziționat?
Am si eu un 407 si la fel imi face display-ul. Se poate repara cumva sau sa iau altul nou?
@@eduardiorgulescu1023 îl cumperi de pe wish . Nu se poate repara .
Preheater control is the missing menu option