Suzuki Grand Vitara 1.9L DDiS Timing Belt Replacement

How to Replace or Install Timing Belt on Suzuki Grand Vitara F9QB 2006 - 2014
Thanks for watching.Subscribe for more videos
#suzuki#tigernor#timingbelt

[@jorisbonson1990]

Cheers for this

[@Tigernor]

Thanks :-)

[@ThePatz]

Hello, what you have Change at 2:40? Is this a Part of Timing belt Set?

[@CristianUlisesGutierrezGutierr]

Me podría enviar cual es el torque de apriete de culata

[@hamidahmad2287]

❤❤❤❤❤remarkable 🎉🎉🎉

[@janekrts]

Thanks for all them videos whit suzuki grant vitara. Is not better access when radiator is off? Thanks

[@Tigernor]

Hei -LUKASZ- L
Good to see that you can use my films on the channel, it will be better space if you take out the radiator, but it is a little more work.

[@gmccross]

Thanks for the video. Could you advise on the timing pin and camshaft pin locations?

[@Tigernor]

Hi, are you thinking about the marks on the timing belt?

[@gmccross]

@@Tigernor no the locking pin for crank. I think it's down to the right of the oil filter. Awful position and can't seem to access easily.

[@Tigernor]

Hi, are you thinking about the pin for crank and camshaft ?

[@janekrts]

@@Tigernor Hi, maybe you have a video of a timing belt tensioner. I mean exactly how to do it, best regards and thanks to all the videos good job pp.

[@Tigernor]

Hi!
Can you use this movie? bit.ly/393kMtt

[@vasilizaitsef2252]

Very nice

[@Tigernor]

You welcome, glad you liked it. Next week Replace alternator On Suzuki Grand Vitara FRQ 2006

[@conormagee5050]

Do u have to use crank locking tool or can u get away without using it?

[@Tigernor]

Hi! No, put the car in gear, and the brake on, not the best way, but it works

[@sveinistube]

Great video! What did you remove before starting to film? Radiator?

[@Tigernor]

Hi
, You welcome, glad you liked it
Yes, the radiator was broken, do not remove radiator for changing timing belt.

[@sveinistube]

@@Tigernor Thank you!

[@Tigernor]

@@sveinistube Hei, Bor du i Norge?

[@sveinistube]

@@Tigernor Haha, ja :) Ser på en SGV som trenger å få ny registerreim, så denne filmen var interessant! Ser jo ut som en overkommelig jobb for en hobbymekaniker?

[@Tigernor]

@@sveinistube Ja det går nok greit, er det noe du lurer på så er det bare og sende meld. her :-))

[@johncoady9237]

Hi you look like you know your stuff,,I'm viewing one of these tomorrow anything in particular to look out for,,and when you were doing the timing why did you remove the crank cog and then refit do you just not refit belt etc,,, cheers john

[@Tigernor]

Hello! Changed the shimming in the crank, check if the multirib belt has been changed. check if the idler for the multirib belt is ok. if the multi-ribbed belt breaks, you will damage the engine.

[@johncoady9237]

@@Tigernor when you say multi rib belt you mean the timing belt?

[@Tigernor]

Hello! no. multirib belt is the one that sits on the dynamo, the one you can see, the timing belt you can't see, then you have to dismantle some covers. multirib belt pulls dynamo and servo steering, hope this helps a bit :-)

[@calvinoconnor2399]

Hi, do you have any indication of how long it should reasonably take to do this?

[@Tigernor]

Hi!
It probably takes 3 to 4 hours of work

[@vangost8937]

After how many miles/ km need to change the timing belt?

[@Tigernor]

Hi,Your owner's manual is a good resource and will indicate the mileage interval recommended for your specific vehicle make and model. Depending on the manufacturer of the vehicle, mileage ranges for recommended timing belt replacement is anywhere from 60,000 miles to 100,000 miles and 6-10 years old. Also change fan belt.

[@todorivanov8765]

I think the timing belt is loose 6:21 , notice how it is at the beginning 2:10.

[@lisko4038]

what parts other then the belt itself did you change? Sry total beginner here.

[@Tigernor]

Hi
You have to change the water pump, if you buy a timing belt set, it must be included. And then you have to change the multi-rib Drive Belts. If there's anything, just ask. :-)

[@lisko4038]

@@Tigernor Alright thanks a lot, will give it a try lets see how it goes. Just did the fuel filter went really easy thanks to your videos. Do you have any tips how to get the oil filter off? Its in really tight and cant get anything in there. Greets

[@Tigernor]

@@lisko4038 Hi, here is the other video on how to change oil filter; czcams.com/video/MoANJKKuE7U/video.html

[@scooterkid01]

Hi are these an Interference engine?

[@Tigernor]

yes, it is an interference engine.Because the timing chain/belt is broken, the valves aren't moving, which means some of them are stuck in the open position. If the piston travels far enough in the cylinder to actually hit the open valves, that's an interference engine.

[@tmokh4379]

Hi, can you tell me what happen when timing belt skeps on the theese... is it danger ?

[@Tigernor]

Hi, If the timing belt is not on the marks, the pistons will go in the valves. then you have to change valves, it is a lot of work and expensive, the marks must be on the camshaft and crankshaft, do not have to be on the mark on the diesel pump. hope this helps you :-)

[@mustafakhan242]

@@Tigernor my timing belt went but dident make any sound you think there a chance is is fine 2007 susuki gv

[@Tigernor]

@@mustafakhan242 Hi! you may be lucky, I think there are some valves that may have been damaged.

[@cristilepsa81]

Cineva sa ma ajute cu schimbarea pompei de injectie

[@dfsa4909]

Hei, kjempefin video🙂. Bare lurer på hvor stramt register reimen skal strammes?

[@Tigernor]

Hei, Takk :-) her kan du se hvor stramt jeg strammer reimen, håper dette hjelper
czcams.com/video/QXMvG1Vip8Q/video.html

[@laurentiuosipov7074]

Stronk mechanic: new parts over old mess...