Victron GX Device Overview and Comparison | EKRANO GX vs. CERBO GX vs. CERBO-S GX

Sdílet
Vložit
  • čas přidán 7. 11. 2023
  • We get tons of questions about which of Victron's GX devices is the best, so we decided to make a video going over the similarities and differences! If you're questioning which would be best for your set up, we have the answer! We go over the features and differences between Victron's Ekrano, Cerbo, and Cerbo-S GX devices, including when you might want to choose one model over another.
    🛒 Check out our Victron GX Devices:
    Ekrano GX - www.currentconnected.com/prod...
    Cerbo GX - www.currentconnected.com/prod...
    Cerbo-S GX - www.currentconnected.com/prod...
    #victron #currentconnected #EkranoGX #CerboGX
  • Věda a technologie

Komentáře • 22

  • @AdamDeLay07
    @AdamDeLay07 Před 8 měsíci +2

    Thanks for the explanation of the differences. I had wondered what they were but never took the time to look.

  • @JaimetheNomad
    @JaimetheNomad Před 8 měsíci +4

    The ekrano is great but my favorite thing about it is not needing to run an extended hdmi cable to a screen since it’s all in one

  • @johnguilbert1349
    @johnguilbert1349 Před 8 měsíci +2

    Great video! I picked up the CERBO-S GX a few months ago for my multipurpose off grid moto trailer. I did not need all the extra connections the full Cerbo provides. It has been a very nice addition to compliment the rest of the Victron gear I have. Being able to interact with the system via VRM is really nice. Recently did a FW update to the MultiPlus all via VRM portal which was a luxurious experience! Love you guys! Keep the great videos coming!

  • @patricklyons7683
    @patricklyons7683 Před 8 měsíci

    Got around to using your 48V forklift concept for charging capacitor's...love it! Cheers bud from UK =GunZenBomZ=

  • @davidpatrick1813
    @davidpatrick1813 Před 8 měsíci

    Nice and helpful review.. thanks

  • @83kaszas
    @83kaszas Před 2 měsíci

    *my inverter the rs smart solar 48/6000 is connecting on VEcan,and my battery bms,i can only connect one to my gx device...would the ecrano gx be better to connect both? also this would rendes my bmv712 smart shunt useless?

  • @rivinscommentary1705
    @rivinscommentary1705 Před 5 měsíci

    Great video

  • @lance307
    @lance307 Před 3 měsíci

    On the cerbo gx, can i use a tablet as the screen via Bluetooth so i dont have to buy the screen?

  • @cowboymcq6711
    @cowboymcq6711 Před 8 měsíci

    I have the mppt 150/100 controller won’t this be able to communicate with my phone threw bluethooth ?

    • @simon359
      @simon359 Před 8 měsíci

      Yep!

    • @sreekumarUSA
      @sreekumarUSA Před 6 měsíci

      FYI Cerbo-GX and Ekrano-GX will communicate with your iPhone through Blue tooth transmission and also RJ45 LAN connection. (not on an ocean going/river vessels.But possible through Satellite communication.

  • @nebulight
    @nebulight Před 8 měsíci

    Technically the Ekrano’s two vecan ports are better than the cerbo as the cerbo bms can can’t do ve.can or the new rv-c. Example would be an rv with rv-c and you have a ve can mppt. You can’t then do rv-c AND vecan on the cerbo but you can with the Ekrano. Small difference.

  • @mantas6293
    @mantas6293 Před 6 měsíci

    on a boat I still prefer CerboGX in the engine room + hdmi cable extension (10m works fine) to the interior cabin where the switch panel is where touch50 is mounted. powered by a hidden usb socket that is connected with a switch. so I can switch off the screen if I don't need it, otherwise CerboGX is still on and is collecting data to VRM.

    • @CurrentConnected
      @CurrentConnected  Před 6 měsíci

      Victron does not approve of HDMI extensions. Victron's warranty does not cover damage or improper operation resultant of such installation of HDMI extensions. We cannot recommend this option for our customers.

    • @sreekumarUSA
      @sreekumarUSA Před 6 měsíci

      @mantas6293>> Did you mean, you used a male to female HDMI connector to connect to 5" screen and a 5.1V power adapter to power the HDMI cable? If so, that's a great idea. You can also use high speed HDMI cable ver 2.0 (4K@60fps) that may not require external power. You may try it. jan23'24.

    • @mantas6293
      @mantas6293 Před 6 měsíci

      @@sreekumarUSA correct. I have cerbo in the engine room. and the touch50 in the galley. from the touch50 I connected the USB into a local USB socket to give it 5V. USB is only used for power, no data goes through it. Used regular HDMI extension cable 10m to connect it to cerbo it the engine room. everything works fine, touchscreen, clear and responsive. I checked the warranty conditions and did not notice any issue. I don't think Victron would care to certify some standard cables, it's rediculus to expect them to do that. like for bluetooth adapters, they said they tested a few and it works, some don't. they have not certified anything, just did some tests, or referred to others who confirmed that something is working. you can connect your Touch50 to PC and have it as a small monitor - it's nothing more than that 5V small monitor. :)

  • @PabloTBrave
    @PabloTBrave Před 8 měsíci

    The new device also has a more power chipset

    • @sreekumarUSA
      @sreekumarUSA Před 6 měsíci

      It has quad core processor. that too is an over kill. single core chip in Cerbo- GX is good too.I watch my PV systems through my iOS/ OS X systems and also on my Apple Watch, from HKG, DEN, LON, DXB etc

  • @MoaningGit
    @MoaningGit Před 8 měsíci +1

    Cerbo GX is great until you connect it up to 48v and it eats itself.

    • @CurrentConnected
      @CurrentConnected  Před 8 měsíci

      Yes, see our video regarding Victron's memo on this. Victron has corrected this issue and will replace any Cerbo that is affected by this issue.

    • @MoaningGit
      @MoaningGit Před 8 měsíci

      @@CurrentConnected It's still a huge inconvenience having downtime and having to pay return postage. Something they should have corrected before releasing the product.