AutoCAD 2018 - Restore Menubars , Toolbars , Ribbon - Tab's - Panel's & Status Bar
Vložit
- čas přidán 27. 08. 2024
- AutoCAD 2018 - Restore
Menubars , Toolbars , Ribbon's - Tab's - Panel's & Status Bar
File Tab - Layout & Model Tab
~-~~-~~~-~~-~
Please watch: "How to Enable Numeric input on entity creation & Create dimensions Automatically when value entered"
• How to Enable Numeric ...
~-~~-~~~-~~-~
#AutoCAD_Restore_menubar_Toolbar's
#Ribbon_Tab's_Panel's
Very helpful! I'm just upgrading for the first time from 2009 to 2019 and I was like where the hell do I start??? In just 6 minutes I am operating in just about the same condition I was before! You did a great job not only showing how to add things but how to remove them back out if needed. Thanks for the great instructional video!
Welcome dear ...
I just had AutoCad completely wipe out my customized toolbar set up and went back to the default while working away. Not sure what in the world caused it to go back to the original set up, it just completely vanished with no trace of what I did. Is there anyway for me to get back my customized toolbar set up back or is it gone for good. And if gone for good, is there any way to save my customized tool bar set up once I have it the way I want it so if it happens again, I can just import the customized set up back to my set up?
Well, believe it or not. I went back through to set up my customized toolbars again and as I checked each individual tool bar category they came back and were placed in the same place as before with the same individual commands I had after deleting most and inserting a few different ones so I didn't have to start from complete scratch like the first time I did it. I went ahead and saved it this time so if it happens again, I'm hoping I can just select the customized setting. We'll see. Just wanted to give you that feedback in case you didn't know the answer.
This video is very very useful...I like it.. ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤👌👌💪
Thanks Wonderful quick explanation, very informative
helped alot .thanks
Thanks Anket. It's really helpful.
thanku legend !! u made my day
Excellent illustration, thanks!
Thank you very much,it helped me a lot.
Thanks 🙂🙂🙂.
thanks bro.
Great, thank you dear
Thanks sir you are great
Thank you
Thanks a lot!!! This really help me.
Thanks so much for this video
Thx this really help me 👍👍
Eduardo Novoa
Welcome
nice information...
Thank you🙏💕 sir
Thanks you, it really helpful
Once again Thank you
thank you
Thank you!
Thanks Bhai
Thanks a lot
When I type in Ribbon I don't get the panels like happens here at 4:30. I seem to be the only person with this problem. I can't find anywhere else this issue is discussed. Wondering why my CAD wiped it off the screen in the first place.
thanks bro ;)
Great
In my autocad 2013 classic view, i need the file tab. But when i open options & go to display i cannot find the tick box for "display file tab" like in your video. Its very frustrating. Bcos every videos shows the same solution but in my option there's no "display file tab tick box". Please help.
Thanks
Your subject matter is how to restore Menubars, toolabrs etc, yet you start with a populated screen, complete with all the toolbars and icons. My screen is blank. I want to know HOW TO RESORE the Toolbars.
Charles Murimba
You can restore your blank screen with same process
good
How do I fix Question marks on display customized toolbar or ribbon in AutoCAD 2019?
me salvou kkk
Thanks
Plan Dwg kasi Karina and conditions nikalna
I can't understand your language.. English plz
how can i restore the ribbon layers because now iw under the home,annote....
I can't understand your question
@@anketkamtekar
at home when I click my layer properties appear from above and I want to change it
@@annakomkoudi6257
9850521466 share me pic on whatsapp
@@anketkamtekar i dont have whatsapp can you send your email to send you
@@annakomkoudi6257
Kamtekaranket@gmail.com
input colour is not matching with the outout...help me to fixit
Which ?
@@anketkamtekar blue turns to reddish nd cyan to green etc
@@vishnubiju269
Command OP (option )
Profile tab
Reset
Helped me out, it's annoying how autodesk makes it harder to restore toolbars. Music is a bit hard to take, had to turn it off.
David m
Just only you feel this... other Autodesk software user are satisfied with Desiging
I've seen many discussion groups discussing how to set up toolbars like in classic AutoCAD, the ribbon adds one step to each command. Even worse with Release 2018, after setting up toolbars the way you want, everytime you bring up AutoCAD, another toobar pops up all on its own. AutoDesk has said it is a know issue and is working on it. It's not just me.
David m
Thats good ..but i could not face problem to set Autocad workspaces .. autocad only one software who give switch workspace during drawing .. no matter about you work on 2D or 3D
Sandra Andrea
Now lates2 version of autocad have new features and some enhancements in Software ..some people don't know or not mostly used this features of Autocad make Drawings fast and easier .. they satisfy with older version because they start learn on this particular workspace as Classic ..
But they are cant understand why Autodesk Provide Ribbon And Different Workspace ..
Thanks 😊 🙏 😊 🙏
thxx
how to restore scroll bar? please explain it
Option - OP
Display
(Check marked) Display scroll bar in drawing Window
Sir my project management is disappeared how to solve it please sir I am waiting
What's the problem
@@anketkamtekar My project manager is no showing
Are you Electrical cad user ?
@@anketkamtekar yes I am using that
Solution:
To resolve this issue, attempt the following:
Use the PROJECTMANAGER command to bring the palette back:
On the command line, type in PROJECTMANAGER.
Select Enter.
Use the CUI to bring the palette back:
On the command line, type in CUI.
On the left column, select the current work-space.
On the right column, expand the "Palettes" drop down.
Select the "Project Manager" option.
On the bottom column, select the "Show" option, and select "Yes."
Select the location of the palette.
Select "Apply" and then "OK."
how to enable and disable status bar
Type command statusbar and change the value ...
anket kamtekar tqs bro
Toggle key how to restore
Help accidently click autodock and now I dont know how return it back
Did you mean all toolbars are locked?
@@anketkamtekar never mind I could fix it by my self but thanks for the video it helped me a lot
crap
👎👎👎
Appreciate...
not useful
So You will make useful...
@@anketkamtekar it's not working on my system it shows unknown command
@@abhishekkoushik934
So its error for your system not to any one..
@@abhishekkoushik934
Which is the unknown command?
@@anketkamtekar sometimes menubar and ribbon everytime
Thank you so mush for this video
thanks bro.