Phone rca connection is for input and amplify the phonograph, Gramophone or Turntable to play old round records. And Auxiliary is to input any line level music source to amplify and to be heard via speakers connected to the Amplifier. It can be Cassette deck, CD, dvd player, mp3 player, Bluetooth audio interface to play your streaming music sources such as Todal and Spotify etc. I hope I answered your questions. Thanks for tuning in & support, much appreciated 🙏
I think your amplifier is suffering from switching circuitry serves as relay due to high humidity on the circuit board. If you are technicall enough then I advise you to open the cover and use hair dryer on the circuit board each side for total 10 minutes. Or leave it in direct sun light (if you live in sunny country)for an hour. It should dryup the humidity on the circuit and amplifier will work as normal. If that not solve the problem that means the componenets on the switching circuit are faulty. Always keep volume on minimum when it is not coonected with load (speakers) before starting the amplifier. Let me know if it works for you.Thanks for support, much appriciated
Check also the fan. Search for this problem. I dont know this model but the ones before have this overload issue when the fan or the fan connector is cook
![[TAS] SNES Castlevania: Dracula X "best ending" by McBobX in 13:48.34](http://i.ytimg.com/vi/rcPR8p8WJ_I/mqdefault.jpg)
What is phono for ??
Can I play music using Aux?
Phone rca connection is for input and amplify the phonograph, Gramophone or Turntable to play old round records. And Auxiliary is to input any line level music source to amplify and to be heard via speakers connected to the Amplifier. It can be Cassette deck, CD, dvd player, mp3 player, Bluetooth audio interface to play your streaming music sources such as Todal and Spotify etc. I hope I answered your questions. Thanks for tuning in & support, much appreciated 🙏
What type of fan does it have. Is it a
12v DC brushless fan
Its 9 volt DC 0.3amp
I have a overload issue. When I turn on it goes straight into overload. With no speakers connected.
I think your amplifier is suffering from switching circuitry serves as relay due to high humidity on the circuit board. If you are technicall enough then I advise you to open the cover and use hair dryer on the circuit board each side for total 10 minutes. Or leave it in direct sun light (if you live in sunny country)for an hour. It should dryup the humidity on the circuit and amplifier will work as normal. If that not solve the problem that means the componenets on the switching circuit are faulty. Always keep volume on minimum when it is not coonected with load (speakers) before starting the amplifier. Let me know if it works for you.Thanks for support, much appriciated
Check also the fan. Search for this problem. I dont know this model but the ones before have this overload issue when the fan or the fan connector is cook