Click HERE for the same knobs shown in this video amzn.to/3Ic3uJT **Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇 www.amazon.com/shop/boostedmotorsports Ram Truck Bed LED install video czcams.com/video/zmV5boY0tfc/video.html
@@johnsn10 there’s 2 plastic tabs on each side, (8 total)use a trim tool to get underneath and loosen by pushing them to the center. Careful they can brake.
Update the radio to a big screen. Spend some money and give it a whirl. That would be content for sure and you are guy to do it and give us real feed back.
I have the exact interior in my 2018 Ram 1500 and that chrome in the console around the storage cavern is the biggest pain when you live in sunny areas. I have an eye glass cleaning rag I keep nearby just to drape over the chrome when the sun is shining in while driving. I've also used McDonalds napkins until the sun was no longer a problem. I will look into that to stop the glare. Thanks for the accessories videos.
I have seen those before but was never sure. Will have to let us know how they hold up over time. I added a Mopar aluminum face plate for the Durango drive select knob and have enjoyed the change.
I bought some 6 months or so ago, my set came with the headlight and the gear selector also though, never included any tape, i could use some, since winter hit things must of shrunk due to cold a tiny smidge, they can spin and come loose, haven't had one fall off though, eventually i will remember to put a tiny piece of two sided tape in them.
Definitely a nice little bling additive to the interior of your truck looking good 👍!!!! I don’t think if it didn’t look good you wouldn’t be using it!!!! See you in the next video!!!!
You should try the die for the headliner make it black I tried it on the plastics and it worked pretty good I’ve been thinking of doing the entire ceiling liner but don’t know how it would turn out
I'm upgrading the factory radio in my 2016 ram 1500 (auto a/c). The new radio comes with a new bezel with spots for the volume, a/c, and tuning. I can't figure out how to remove the knobs from the old bezel. I've removed all of the screws, and the knobs/buttons will slide out partially, but seems to get stuck. Can you help me out?
The knobs look cool. Nice little upgrade. As for all the other "stuff".....I just can't.....fake carbon fiber. Getting those parts wrapped in DI-NOC would look better. Just my opinion.
@@BoostedMotorsports I like it.. plus it saves the existing dials from getting worn out... I had a used vehicle before and the person rubbed the chrome and the rubber half off ... it looked terrible
Well now MISTER BOOSTED MOTORSPORTS, i see your evil plan...Trying to get me to put a dent in my bank account with all this carbon fibre and lights trick.....I see how ya are now.... Great stuff bub...
Click HERE for the same knobs shown in this video
amzn.to/3Ic3uJT
**Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇
www.amazon.com/shop/boostedmotorsports
Ram Truck Bed LED install video
czcams.com/video/zmV5boY0tfc/video.html
That shiny peace down on the Center consul. I took mine off and lightly sanded it gave it a brushed aluminum look.
Nice!!!!
How does it come off
@@johnsn10 there’s 2 plastic tabs on each side, (8 total)use a trim tool to get underneath and loosen by pushing them to the center. Careful they can brake.
I think you should’ve shown a demonstration with the double sided tape as well
Update the radio to a big screen. Spend some money and give it a whirl. That would be content for sure and you are guy to do it and give us real feed back.
Its been done....I think the youtuber was named "Big Daddy"
I have the exact interior in my 2018 Ram 1500 and that chrome in the console around the storage cavern is the biggest pain when you live in sunny areas. I have an eye glass cleaning rag I keep nearby just to drape over the chrome when the sun is shining in while driving. I've also used McDonalds napkins until the sun was no longer a problem. I will look into that to stop the glare. Thanks for the accessories videos.
Love the cheap mods and love that everything comes basically from Amazon
That's a heckuva simple knob job there! LOL!
All kidding aside, great video! Thanks man!
Haha thanks Mark!! 😂
I've always thought the stock knobs looked cheap. Going to have to pick up a set and step up the interior a little.
Yeah I figured I would take a chance for $11 and I’m actually pretty surprised how decent they look for the price 💪
I have seen those before but was never sure. Will have to let us know how they hold up over time. I added a Mopar aluminum face plate for the Durango drive select knob and have enjoyed the change.
For sure! I think they will be fine. For $11 even if they wear out eventually it’s not a big deal lol
I bought some 6 months or so ago, my set came with the headlight and the gear selector also though, never included any tape, i could use some, since winter hit things must of shrunk due to cold a tiny smidge, they can spin and come loose, haven't had one fall off though, eventually i will remember to put a tiny piece of two sided tape in them.
Enjoying the daily updates! The knobs look pretty cool too 😎.
Thanks Gary! Fun to do these little things while I have some time!
The tape is for the dials that are worn. I put those on my mom's Durango because the dials were worn
💪💪
Definitely a nice little bling additive to the interior of your truck looking good 👍!!!! I don’t think if it didn’t look good you wouldn’t be using it!!!! See you in the next video!!!!
Thanks Henry! It’s a nice little touch for $11 😁
Nice video
Dawg you steady upload and my ass got a wish list for my ram so big cuz of this channel. I like it 😈
Looks good!! I ended up painting that center console trim black so it would stop blinding me .. lol
I haven’t had it much on this 16 but on my 14 trucks with the squared off version it was brutal!
They actually kinda match the dash vent closure/roller knobs
I have a 14 tradesman with the basic climate control with 3 equally sized knobs. Couldn’t find find that set up in the links or Amazon.
You should try the die for the headliner make it black I tried it on the plastics and it worked pretty good I’ve been thinking of doing the entire ceiling liner but don’t know how it would turn out
I'm upgrading the factory radio in my 2016 ram 1500 (auto a/c). The new radio comes with a new bezel with spots for the volume, a/c, and tuning. I can't figure out how to remove the knobs from the old bezel. I've removed all of the screws, and the knobs/buttons will slide out partially, but seems to get stuck. Can you help me out?
I got the blue ones in mine. They actually have one on eBay for the headlight knob as well
That's what I've been lookin for but can't find any that fit. I've had to return them cuz they're too big.
The knobs look cool. Nice little upgrade. As for all the other "stuff".....I just can't.....fake carbon fiber. Getting those parts wrapped in DI-NOC would look better. Just my opinion.
Yeah I’m with ya it’s kinda fun though too!
I have the red one's but my climate is kinda loose though. Nice vid.
Nice and clean I like'em
I think the knobs look good..! thumbs up
Thanks brother 🤘
Some nice finds for sure! Have you done a video for the cabin air filter mod? Saw it on your Amazon list :)
That’s next! 😁
Will this work for a 2014 durango?
I purchased most of the carbon fiber wraps. The one that goes on the steering wheel makes my button stick.
Pretty nice touch for $11.
Not baddddd
@@BoostedMotorsports I like it.. plus it saves the existing dials from getting worn out... I had a used vehicle before and the person rubbed the chrome and the rubber half off ... it looked terrible
They look great, do they have them for an 08?
Nice, darn shame they don't have them in 5 pc.
Do you know if there’s an aluminum knob cover for the headlight knob?
Yes they do, I have all the knobs covered on my Ram.
Just wait till you grab that in the middle of summer and scald your fingertips.
You don’t like touching your knob in the summer? 🤣
trying to find matching headlight and shifter knob covers in either black or silver is impossible apparently
What nasty weather, right now in Toronto,Ontario Canada we will have 20 cm of snow by tomorrow afternoon brah
Lived there 25 years that is torture lol
@@BoostedMotorsports totally 🤣
A lil further east in novascotia we will be getting beautyful temps for a cpl days and buckets of rain..
just bough some red ones to match my charger
Heck yeah 💪
I cant find any that fit
Try out the carbon fibre!
The side pieces from the screen don’t fit right I just bought them for Christmas idk about the others
Good to know!!
Nice Bling🤳《☆》🖖🤓🏈
Are those knobs same size as the older ram 4 th gen
No they are different here are the ones for yours amzn.to/3sPtW5i
I got these for my journey but they did not fit. Too small. So nobody get these for a 2015 journey!
Bro I’m trying to keep up with everything ur doing lol
Haha it’s a lot but it’s fun
👍👍💯💯🙌🙌🇺🇸🇺🇸👌👌
💪🤘👍
Well now MISTER BOOSTED MOTORSPORTS, i see your evil plan...Trying to get me to put a dent in my bank account with all this carbon fibre and lights trick.....I see how ya are now....
Great stuff bub...
Haha I’m just trying to find cool little things that don’t break the bank while I have some time before getting back to the big projects 😁
@@BoostedMotorsports naw bub its all good...You always have some good stuff posted..