Making Blacksmith Tongs - Blacksmiths Essential Skills -
Vložit
- čas přidán 16. 03. 2021
- Jumping off from last week's sections we are now on to one of your essential tools, This video goes in depth on how to forge your very first pair of Flat Bit Tongs. Showing all the steps and little tricks that we use to make them so that you can start making your own blacksmith tools at home. Enjoy, and as always let us know what you think in the comments below...
You can follow us on Instagram, Facebook and Patreon for regular updates
/ phoenixforgeltd
/ phoenix.forge.1
www.patreon.com/user?u=5530715
If you have any ideas for future videos let me know in the comments below.
You can help us to make new content by supporting the channel, by purchasing your very own Born-to-Forge T'shirts and hoodies from the link below - Zábava
Hi Blacksmith! Being 73 years old my muscles dont allow me to hammer out a pair of tongs so I have done it the easy way, I cut out a blank with the plasma cutter and taper it down not a lot of work involved.
I am trying to get a camera that I can do a video on for all us old timers.
I loved Smithing as boy with my old grandad bob wilson, of Errol Nr dundee. That was in the 60s but great fun and a great learning curve.
I am now doing it as a hobby, So I watch your Channel and also Black bear Forge. Just great entertainment. Thanks for the video.
that anvil rings like no other
Once I tried to pick up a chisel. Unfortunately it was still hot and for the next days everything I touched with the two fingers felt like smooth plastic. Though it gave me good oportunities for pranks including "too hot" food.
..Thanks for this Essential Skills Series. It's Educational and Entertaining...!
Glad you enjoy it!
Thanks brother this was excellent. Doing my first 5 day forging intensive in a couple weeks this really helped to hear the language and see you going through the whole process. We will be making these then along with other tools
Your camera person does a great job because they understand to set exposure on the glowing steel which makes seeing what you are doing much more visible. Kudos to them. I hope other channels would learn from your example.
Excellent.. And another tong series to absorb.. Looking forward to it. Cheers
I used this as a step by step for making my first pare of tongs. Worked out really well
Wonderful job, as always!
Nice work!
Thanks! Nice work!
Very helpful, thanks!
hello from iraq with you amazing work
I really enjoyed and appreciated this lesson in forging tongs. I am a beginner and this video is very helpful. Thank you very much.
Thanks for the knowledge
Just found your channel and the essentials like this are what I’ve been looking for! Thank you!
Just came across your channel - great lesson. Thanks!
Great video, keep up the good work
Good job Will, a few tips I will use forging my next! Thanks mate!
Great communication Sir, outstanding instruction.
Awesome job perfect video for learning how to forge thanks
This was super helpful
Very nice video this week. Really like this video series. Keep up the great craftsmanship and hard work my friend. Can't wait to see ur next videos. Forge On. Keep Making. God Bless.
I’ve watched more blacksmith videos than is healthy probably but in all that time you have the most fantastic anvil. That thing is a beast! I understand this video is very old but if anyone reads this and knows maker and approx size of that anvil I am very curious. Gorgeous anvil for real.
just subbed and liked i loved that video i need some tongs im gonna try forging some im new to bladesmithing and blacksmithing and love it thank you for making videos to help newbs like me cheers Mark😀👍👍
Nice work im on my 4th pair, from rebar getting there, a few mor pairs, thankyou brother
Great video mate. I just recently made some Z-gong for someone but need a pair like this for me self
Great video bud enjoyed it. Just started watching your videos good stuff
Man I love your videos! I’ve fallen in love with smithing, just wish the tools weren’t so expensive 😅
I really appreciate these videos. I have no previous knowledge about forging, but it is something I have always found fascinating. I have somewhat access to a decent forge and will try out these guides eventually. What I find confusing is what kind of steel to buy. There are a lot of different sizes and types of steel, but I assume that there are standardized types and sizes. I would really appreciate if you in the description wrote what size and type you used. Another idea is to consider a guide, written, or in video on how to understand steel types and sizes? (what would you use for different kinds of products etc.?)
I'm a year late to the party but here i go anyway.
Local steel suppliers often only supply mild steel. If it's sold for welding/construction purposes it'll be mild.
Mild is perfect for most blacksmithing(like these tongs) as it forges nicely. As you get into blacksmithing youll want to get yourself a nice assortment of round/square/flat bars. But for now pick 2 or 3 round bars in the 1/4-3/4 inch range.
For some tools you'll want hardenable steels though. Some steel suppliers do carry hardable steels but most buy them online. if you want i can link you some depending on your location. . 1045/4140 are most common for general tools, 1075/80/84 or 80crv2 are recommended for knives.
There's MANY different ways of naming steel that can get very confusing. What i mentioned is the American nomenclature system. if you google "XXXX steel equivalents" you can find the equivalent steels in other systems.
6:45
Haha, after you said you were warming up, the next shot had you in a t-shirt!
Just came across you channel. Nice tongs. New sub!
Hi can you repeat the bar dimensions in cm plz plz plz
Btw it's the best pong created online
We’re making these in college atm! Thank you so much for the video :) super helpful! It’s horrible when you get a tutorial and then a massive brain fart after they have walked away as if you haven’t watched or listened 😂
Beautiful. Just started forging tongs. Love how those turned out. Thanks for demonstrating.
Hey there! I’m working on building a forge at my house, and I was wondering if you know anything about how I should design it? I don’t mean to bother you, but I don’t have many places to visit for information. I have access to a lot of brick, and a cement mixer, but beyond that I have no clue what I’m doing.
Also, would a standard forge be able to heat up a long bit of metal evenly, or do you need something more specialised in your experience? Thank you for your time if you choose to reply to this!
Thanks mate. Another great video. That was just mild steel, yeah?
Hi, Thank nice video
but do you not using tongs take video again, Blacksmith Primitive Essential Skills series :)
Commenting half way through.
Not trying to troll or nothing, but maybe I missed it. You haven't mentioned yet that both sides are exactly the same and that the flipping the one over is what mirrors it.
Another fantastic video. One thing about tongs; Is there a reason for different ends on tong tines? Some have ball ends, some just tapered out and some curved. Is it just for looks. With what I do they all seem to work. Thank you again for sharing your knowledge. Oh, I enjoy seeing your back ground. Your tools and projects. Your shop would be much better to visit than Disney Land.
It's mostly just personal preference, some people like the ends to flick out so they know where their hands sit if that makes sense, I prefer them plain so nothing to dig in to your palm
do you use a side blast or under blast forge
Do you ever use beeswax to help protect the steel from rust?
What steel are you using for the tongs?
Are these being quenched in water or oil?
What kinda pen are using?
Would you need to temper them as well?
Mild steel, no hardening going on here.
I think I´ll just grab some old tongs - I usually get them for 1€ each - and disasseble and reshape them.
Nice job, could you do something about the ring in the anvil, hard to hear you with that ringing. And you didn't tell the people which way to turn the tong for 2nd set down. It varies for left and right hand tong holding. Just a thought.
My eyes 👀 when your figure got close to it
less yacky more smacky
that is a giant F-ing rivet!
Salut din România respec pentru manca care o faci freu și eu două bucăți de clește preț mulțumesc
I’m a sissy , I have to wear gloves because I always burn myself 🤣you would figure that 42 years I would be tougher at it but my 57 year old hands are still tender lol
Started out promising! But I had to give up… the ring of the anvil was just too much in my earphones at the lowest volume.
So you need tongs to make tongs
Where do your H's go? The same place our Southern American G's at the end of a word goes?
Too sparky sparky
He is using tongs, to make tongs.
You can make them without using tongs, just use longer stocks at the beginning and trim them off when the reins get long enough.
The entire world :
"Jaws"
"Boss"
This fucking clown :
"NIB"
"HINGEPLAYTE"
Uh huh and which National school of blacksmithing did you attend?
Your noisy anvil makes it hard to hear what you're saying.