@@TCFan25 looks like you are born in la la la land mate no job is crap people came here and just grabbing their opportunities I m living here and proudly aussie citizen here from 13 years and best thing is my friend I still haven’t registered at centrelink
@@GuriSingh-lj9uo Well with poor writing skills like yours, you better get used to doing crap jobs like that then. No job is guaranteed, so don't swallow your pride for too long about avoiding the dole queue champ!
To everyone complaining about the lack of double-clutch and rev matching, remember that this is talking about HR-B (Synchromesh). This is for trucks with a manual transmission that drive more like cars. That being said, the video does accidentally show "Double-Clutch" a bit early on when it lists covered topics.
I think it is not a good idea when your engine rpm come to 700 during downshifting, and outputshaft rotates adequate 1500 rpm. And this video told me just release the clutch? Such action at minimum wear clutch disks and jerk a truck. I am sure, all good drivers blip the throttle before clutch release.
@@user-cg8jj4ho8i A fair point, however the synchro is supposed to handle the rev mismatch for you. The things that will cause jerkiness are too high of a road-speed when you release, or if you release the clutch too fast. When driving synchro I can get smooth downshifts so long as I slow enough and just take a touch longer releasing (of course, you don't want to coast and exhaust/engine brakes are not going to work with the clutch in).
@@MediaWilly There are four ways. 1. If road speed=idle rpm actual gear, you just release clutch; 2. If road speed higher a little and you want to deccelerate, you make a blip to gas and release clutch; 3. If road speed higher a little and you want to continue moving, you adjust gas and holding it, release clutch (like a second part of upshifting); 4. If your road speed is too higher, but you go uphill and need drop one gear, you make blip the throttle, and after that release clutch and simultaniously press gas enough deeply. I think, these ways are the best for downshifting procedure, when you changed gear and think, how correctly release clutch and give gas. Are you agree?)
Thank you very much , it was a much needed post training before the actual training starts, So the new drivers know what they doing and where they are , 👍
Awesome training company I recommend you jump on board and upgrade your skills or licence. I did driving operations cert 3 it a great course learnt heaps,It was something I have always wanted to do. Even if your got disbility's they are there to help. All the staff are fantastic.and they really care about you your not just another number. I wouldn't be able to get a dream job without Strategix. 5 out 5 star rating
this is what I have wanted to know since am only familiar with 6tonne canter!! hahaha! I will now be stealing those trucks at night and teach myself how to drive at night haha, hopefully all you have said is the correct procedure or I find myself in trouble
Lisa Lefteye go to work on Monday, back home for Friday, £500 in the wallet, zero house running costs for 4 days of the week, every week if you live alone. So easy to save money.
Standard MR/HR licences in Aus are done in synchromesh trucks. You have to specifically use a constant mesh truck to be allowed to drive said trucks. I want to do mine, just to cover all bases. Better to be able to drive everything rather than most things :P
Standard MR/HR licences in Aus are done in synchromesh trucks. You have to specifically use a constant mesh truck to be allowed to drive said trucks. I want to do mine, just to cover all bases. Better to be able to drive everything rather than most things :P
@@thfreakinacage me too. I'm also going for non-synchromesh one. It's almost double the price of normal one. And it's two day training rather than one day standard training
I just passed my HR on Monday with a "licence in a day" course; but I don't feel in any way prepared for work in the Transport & Logistics industry. What can I do as an extra to help bridge an experience gap before I feel safe enough to get behind the wheel full-time?
You posted this comment 2 years ago.... how did you get on. I have recently done a MR "licence in a day" course. You are quite right... there is a definite feeling of "I don't feel prepared". When I start my new job, I am going to see if I can get another heavy vehicle licenced driver to accompany me, until I feel competent.
I've seen other videos that you double clutch the gear. In every change first you clutch to neutral and then you clutch to gear. Why don't you do it in this video?
I've seen 2 things in this video that isn't right... Where's the double clutching while shifting up and or down gears? Where's the Rev Matching while Down Shifting?
Is there a video that explains the different license classes it’s a bit confusing to me as a non Aussie to get a grip on. If I have a cat C license can I drive a truck without trailer on it?
In Australia the licence classes are as follows and I'm pretty sure is standardized across all states. C (car) licence is anything up to a GVM (gross vehicle mass) of 4.5 tonne or 12 or less seats. LR (light rigid) is above 4.5t but no more than 8t. MR (medium rigid) allows you to drive any vehicle with only 2 axles. HR (heavy rigid) is required for a vehicle above 4.5t that has 3 or more axles. Note that all rigid licences except a car licence may tow a trailer up to 9 tonne GVM as long as it doesn't exceed the GCM (gross combined mass) of the towing vehicle. Also note that even if the vehicle is unloaded you still require the licence type according to the GVM of the vehicle. HC (heavy combination) is required for a vehicle such as a semi trailer or a truck & dog trailer due to these trailer having a GVM of more than 9t. MC (multi combination) is the highest licence class and it allows to drive anything and is required for towing more than 1 heavy trailer such as a B double or even a road train which is 3 or more trailers. You also need to sit a test in a non synchromesh gearbox truck to be allowed to drive them. Otherwise you may only drive a synchromesh or automatic transmission. Hope this helps...
There would be a massive rev difference between those gears. It would not be recommended until you reduced your speed to a point where your revs wouldn't skyrocket but you should always come down your gears anyway in a truck as the lower gear helps you to reduce speed. I only drive a 6 speed but I'll often drop from 6th to 4th but I wouldn't skip any other gears.
@@XaviRonaldo0 Thanks for reply. Imagine, we encounter a situation when we have to downshift from 4th directly to 1st. In a manual car, we are allowed to do that. In my old car, I have to do double-clutch in order to smoothly do so, otherwise my car will judder. But in a truck, like in this video, it didn't mention about skipping gears, even only one gear such as from 4th to 6th or vice versa like you do.
Good to see you do not teach people in a crash box. Or you would have your both feet working going down the gear box and you did not mention the ex- brake . When slowing down with a heavy load that's what it's for . Show them how to use that as well. Yes do a walk around at least put all the lights on and check everything oil as well and coolent
Dont be...its hard at first but just do it...i went from having only driven 2 automatic cars in my life to driving trucks at 44yrs old it was so hard but like anything you wnt badly you have to see yourself succeeding because if you dont you will give up defeated before you even try. I had to go to driving school 2x to get my classA. The hard part now a days is finding a carrier with manual so you can get some experience driving manual transmission...goodluck
We’re all beginners at the start My first car was a manual with syncing issues and then I had 3 automatic cars and then when I drove at work it was a manual. It’s just a learning process and I think You can learn how to drive a manual don’t give up and believe in yourself and it will come to you.
I am learning synchromesh HR after only holding an automatic car licence. It's a steep learning curve for sure but it's doable, and I'm pretty sure I'm not the only one who's done this.
@@XaviRonaldo0 My car is an old one. When skipping gears in downshifting such as from 5th directly to 2nd, I have to do double clutch, otherwise my car will judder.
Muktar Manky hmm maybe it is or it’s Australia because they say qld with so far as my knowledge goes it stands for Queensland. I hope I do help you somehow.
Just got my HR Licence this would have been so useful before i attempted the test. Literally was the same as the video.
Thank you
This is some precious information presented free of charge!
"please wear deodorant" lol I love how that needs to be mentioned. lol
yes for our lovely indian jobhogs
@@Tasikime and deodorant is very important but most important is registering ourselves at Centrelink cheers good on yaa mate
Don't necessarily envy the jobs they are taking...trucky, taxis, security, call centres etc. Crap jobs to say the least!
@@TCFan25 looks like you are born in la la la land mate no job is crap people came here and just grabbing their opportunities I m living here and proudly aussie citizen here from 13 years and best thing is my friend I still haven’t registered at centrelink
@@GuriSingh-lj9uo Well with poor writing skills like yours, you better get used to doing crap jobs like that then. No job is guaranteed, so don't swallow your pride for too long about avoiding the dole queue champ!
To everyone complaining about the lack of double-clutch and rev matching, remember that this is talking about HR-B (Synchromesh). This is for trucks with a manual transmission that drive more like cars. That being said, the video does accidentally show "Double-Clutch" a bit early on when it lists covered topics.
I think it is not a good idea when your engine rpm come to 700 during downshifting, and outputshaft rotates adequate 1500 rpm. And this video told me just release the clutch? Such action at minimum wear clutch disks and jerk a truck. I am sure, all good drivers blip the throttle before clutch release.
@@user-cg8jj4ho8i A fair point, however the synchro is supposed to handle the rev mismatch for you. The things that will cause jerkiness are too high of a road-speed when you release, or if you release the clutch too fast.
When driving synchro I can get smooth downshifts so long as I slow enough and just take a touch longer releasing (of course, you don't want to coast and exhaust/engine brakes are not going to work with the clutch in).
@@MediaWilly There are four ways. 1. If road speed=idle rpm actual gear, you just release clutch; 2. If road speed higher a little and you want to deccelerate, you make a blip to gas and release clutch; 3. If road speed higher a little and you want to continue moving, you adjust gas and holding it, release clutch (like a second part of upshifting); 4. If your road speed is too higher, but you go uphill and need drop one gear, you make blip the throttle, and after that release clutch and simultaniously press gas enough deeply.
I think, these ways are the best for downshifting procedure, when you changed gear and think, how correctly release clutch and give gas. Are you agree?)
Thank you very much , it was a much needed post training before the actual training starts, So the new drivers know what they doing and where they are , 👍
UMMM try re reading that, tho to be honest if you thought this was anything but bollocks your comment makes sense
Awesome training company I recommend you jump on board and upgrade your skills or licence.
I did driving operations cert 3 it a great course learnt heaps,It was something I have always wanted to do.
Even if your got disbility's they are there to help. All the staff are fantastic.and they really care about you your not just another number.
I wouldn't be able to get a dream job without Strategix.
5 out 5 star rating
currently doing it now who was ur driving ops intructor? keither davies? did it get u a job?
I appreciate this fantastic teachings
this is what I have wanted to know since am only familiar with 6tonne canter!!
hahaha! I will now be stealing those trucks at night and teach myself how to drive at night haha, hopefully all you have said is the correct procedure or I find myself in trouble
Super helpful ,
Make me wanting get HR license..🙏
Nice videos its much help
Very clear instructions 👍
Thank you so much it was very helpful
WOOHOO I'M SELECTED!!!!
Selected for a shit low paid job with terrible work conditions, extremely long hours that cannot be matched in any other industry.
YAAAAAAAAAAAAAAAAAY!!!!!!!!!!
Lisa Lefteye go to work on Monday, back home for Friday, £500 in the wallet, zero house running costs for 4 days of the week, every week if you live alone. So easy to save money.
lol
😆
heaps informative,thanks for the upload .Can you also upload one for NSW ?
well explained mate
Thank you you've helped me a lot
Great tips thanks
Wowwww
I like to learn how to drive a track
Very nice 😊.
Awesome
wow... o maizing... mantap...
Like how you explained road ranger
very imformative video (Y)
@Hello Jermel Katalbas, How are you doing?
Good video thanks
Just got my HR license because of this video. Lol no experience driving anything but a Ute and passed because of this vid 😂😂😂😂😂😂😂😂😂😂
How many gears in a standard synchromesh truck??
Love ✌
Can you blip the throttle in a truck when down shifting? I've never driven a truck before, just curious.
Yes you certainly can, but newer vehicles can do this for you, once the clutch is at it's friction point.
Thank you very much
Good video
I never have seen important video like this in my life 😂😂
savage😂
Thank you so much
Great video
excellent information, the only problem is I’m in NSW,
Thanks anyway
Yes that is a big problem.
Yeee yeeehhh.... im selected 😋😋😎
nice truck
good video, wearing deodorant is a must! This is a confined space
Your the video is so sweet and you can text me up on WhatsApp +1 (317) 360‑2753
Verry good
I will would love to be there
Very interesting
Do you really leave it parked in neutral after it idles cool? Handbrake failure?
Air brakes lock the brakes on. very good safety feature incase you lose air. brakes will lock on
I don’t, I leave my truck in reverse just to be sure.
WOOOOOHOOOOOO CRUNCH THE GEARS WHILE DOWN SHIFTING WITHOUT REV MATCHING
Standard MR/HR licences in Aus are done in synchromesh trucks. You have to specifically use a constant mesh truck to be allowed to drive said trucks.
I want to do mine, just to cover all bases. Better to be able to drive everything rather than most things :P
synchro bro
While while excellence
easy to understand
I’m looking to get my HR lincene
Can you do a course to go from Opens to HC?
Nice
Cost $50 in NSW for drivers knowledge test wish it was that cheap haha
I have my own truck is that alright
This is how to get your license in Australia ??
No rev matching when going down gears?
Nah they crash through the box now
Standard MR/HR licences in Aus are done in synchromesh trucks. You have to specifically use a constant mesh truck to be allowed to drive said trucks.
I want to do mine, just to cover all bases. Better to be able to drive everything rather than most things :P
@@thfreakinacage me too. I'm also going for non-synchromesh one. It's almost double the price of normal one. And it's two day training rather than one day standard training
Thanks
I like 18speed shifting
I just passed my HR on Monday with a "licence in a day" course; but I don't feel in any way prepared for work in the Transport & Logistics industry. What can I do as an extra to help bridge an experience gap before I feel safe enough to get behind the wheel full-time?
Become a bus driver
@@businessguide8850 lol
You posted this comment 2 years ago.... how did you get on. I have recently done a MR "licence in a day" course. You are quite right... there is a definite feeling of "I don't feel prepared". When I start my new job, I am going to see if I can get another heavy vehicle licenced driver to accompany me, until I feel competent.
Nice vedio..send more
👍 👍
I got my MR licence I’m looking to get onto my HR 4 years I held it for
That is gosh, it’s nice to meet you and how are you feeling today.. you can text me up on WhatsApp +1 (317) 360‑2753
1:43 Camera vehicle is on the wrong side of the double lines.
I've seen other videos that you double clutch the gear. In every change first you clutch to neutral and then you clutch to gear.
Why don't you do it in this video?
thats non synchro
I've seen 2 things in this video that isn't right... Where's the double clutching while shifting up and or down gears? Where's the Rev Matching while Down Shifting?
It's a synchro gearbox
Pacy background music. This has enough variety not to give me the irrits
Wait, are you saying i am now selected just by watching this video in 2018 March 20?
So do we not double clutch?
Depends on the truck. I don't have a high low switch on the stick, I got a slap stick shifter.
Synchro truck
Is there a video that explains the different license classes it’s a bit confusing to me as a non Aussie to get a grip on. If I have a cat C license can I drive a truck without trailer on it?
In Australia the licence classes are as follows and I'm pretty sure is standardized across all states.
C (car) licence is anything up to a GVM (gross vehicle mass) of 4.5 tonne or 12 or less seats.
LR (light rigid) is above 4.5t but no more than 8t.
MR (medium rigid) allows you to drive any vehicle with only 2 axles.
HR (heavy rigid) is required for a vehicle above 4.5t that has 3 or more axles.
Note that all rigid licences except a car licence may tow a trailer up to 9 tonne GVM as long as it doesn't exceed the GCM (gross combined mass) of the towing vehicle. Also note that even if the vehicle is unloaded you still require the licence type according to the GVM of the vehicle.
HC (heavy combination) is required for a vehicle such as a semi trailer or a truck & dog trailer due to these trailer having a GVM of more than 9t.
MC (multi combination) is the highest licence class and it allows to drive anything and is required for towing more than 1 heavy trailer such as a B double or even a road train which is 3 or more trailers.
You also need to sit a test in a non synchromesh gearbox truck to be allowed to drive them. Otherwise you may only drive a synchromesh or automatic transmission.
Hope this helps...
@@XaviRonaldo0 it did indeed. Thans for the info.
I'm doing my training atm.. and the truck I'm learning on is a dinosaur, nothing flash looking like on this video :(
Can we skip gears such as from 8 directly to 4 ?
There would be a massive rev difference between those gears. It would not be recommended until you reduced your speed to a point where your revs wouldn't skyrocket but you should always come down your gears anyway in a truck as the lower gear helps you to reduce speed. I only drive a 6 speed but I'll often drop from 6th to 4th but I wouldn't skip any other gears.
@@XaviRonaldo0 Thanks for reply. Imagine, we encounter a situation when we have to downshift from 4th directly to 1st.
In a manual car, we are allowed to do that. In my old car, I have to do double-clutch in order to smoothly do so, otherwise my car will judder.
But in a truck, like in this video, it didn't mention about skipping gears, even only one gear such as from 4th to 6th or vice versa like you do.
10 questions and a 20 minute practical test!? What the Hell!? Is that it?
Hence why QLD drivers are the worst.
To upgrade I want one of bus Carvane
No double clutch?
It's a synchromesh
🇲🇦♥️♥️♥️🇲🇦🇲🇦🇲🇦🇲🇦👍👍👍👍👍
Good to see you do not teach people in a crash box. Or you would have your both feet working going down the gear box and you did not mention the
ex- brake . When slowing down with a heavy load that's what it's for . Show them how to use that as well. Yes do a walk around at least put all the lights on and check everything oil as well and coolent
i like it
Gear shifting seems to be so complicated specially for someone like me have been driving Auto all my life I feel down and disparate now :(
Dont be...its hard at first but just do it...i went from having only driven 2 automatic cars in my life to driving trucks at 44yrs old it was so hard but like anything you wnt badly you have to see yourself succeeding because if you dont you will give up defeated before you even try. I had to go to driving school 2x to get my classA. The hard part now a days is finding a carrier with manual so you can get some experience driving manual transmission...goodluck
We’re all beginners at the start My first car was a manual with syncing issues and then I had 3 automatic cars and then when I drove at work it was a manual. It’s just a learning process and I think You can learn how to drive a manual don’t give up and believe in yourself and it will come to you.
I am learning synchromesh HR after only holding an automatic car licence. It's a steep learning curve for sure but it's doable, and I'm pretty sure I'm not the only one who's done this.
Wave
The LR or MR licence to HR is false I went from C licence to HR now I can for my HC or MC unless QLD has different obligations from NSW
It’s me
I leave my truck in gear.
04:29
0:36
09:22
super erklaert fuer neulinge
Like will smiths
Dear sir
I am from Pakistan
I am interested
How I can get visa
Dervo
HIIIIIIII IM STEVE
Hi Steve
No stinky!
Glenray
She hanged me traffic control I one pair for while
double clutching...didnt see that.
Because the truck has a synchromesh transmission much like a car.
@@XaviRonaldo0 My car is an old one. When skipping gears in downshifting such as from 5th directly to 2nd, I have to do double clutch, otherwise my car will judder.
General manger what that daddy live u George Adam hummer what in. That a babby boy 👦
Found the lost house
Hello sir i want training havy driving please reply thanks you so much
That will cost you 3 goats and your daughters hand of mairrage my friend.
@@michaelfigert4030 thanks 😂😂
Please use deodorant wtf 😂 if you need to be told that you should not be driving a truck.
Agreed, using deodorant insured the safety of you and other road users.
HA! 😂
I Hate non Synchromesh Transmission because you dont enjoy the drive...That why mine is Synchromesh Transmission old school style..
This European not usa
Muktar Manky hmm maybe it is or it’s Australia because they say qld with so far as my knowledge goes it stands for Queensland. I hope I do help you somehow.
It is Australia 🇦🇺
summin like that XD
Gave me headache
8 speed
Monday Sega world 🦇 ticket caves bbc kyptonight superman did mine craft clown 🤡
Too much talking
| LICENCED X
INTERNATIONAL
How about WA mate?
| LICENCED X
INTERNATIONAL