You do great work! Been watching a few of your video's back to back. Keep going with it. You have genuine talent. The best advice I could possibly give you is to never stop using those talents. Continue to hone and grow them. They will serve you well! Amazing stuff, looking forward to see what you keep doing.
Sprayway i also follow u big bro and i love your content but big ups to the big homie @RocBuiltIt. Yall keep doin your thang cause its always a motivation for me.
I don't even do this type of work but this was so interesting to watch. I'm seriously thinking about doing this to my truck this summer. Great video. Keep it coming.
Man bro I have a 2010 impala and I’m definitely literally going to follow you’re videos step by step to do my doors thank you so much man , I hope You don’t mind I take you’re idea
Best part watching is the jigsaw skills...and a cheap jigsaw at that....you can do great work cutting templates with jigsaw if you are good... then flushtrim router...35 years in caraudio..jigsaw is fastest..easiest ...respect
Yo you know after doing that fiberglass work along with the speakers and mdf layers your doors will truly be bullet proof 😂😂 no lie a person can do 5 layers of fiberglass and it straight up stops bullets in the range so I assume 1 thick layer w mdf after would probably do the same thing. Haha most people don't know this but if city is wild like my city ya never cab be too careful. So it's a win win. 😂😂
Thanks man 💯. But I use this stuff I get from my job. It’s cardboard but it’s thick. Honestly u can use hard poster board material but u gone have to put resin on it to harden up. Or u can use that hard cardboard stuff in Home Depot but it’s not good around curves
Yo I just stumbled upon your videos...... I must say you got some really good skills...... I subscribe and like and if you are in Atlanta I might have you do something for my 1989 Lincoln Town Car....
I get this thin cardboard stuff from my job. U might can find it in stores cuz it feel just like poster board material...just a lil thicker. But if that wasn’t the case I would be using the thin flexible cardboard from Home Depot or Lowes
I get this thin cardboard stuff from my job. U might can find it in stores cuz it feel just like poster board material...just a lil thicker. But if that wasn’t the case I would be using the thin flexible cardboard from Home Depot or Lowes
You do great work! Been watching a few of your video's back to back. Keep going with it. You have genuine talent. The best advice I could possibly give you is to never stop using those talents. Continue to hone and grow them. They will serve you well! Amazing stuff, looking forward to see what you keep doing.
Thanks bro preciate the support
You have such a gift. Really appreciate seeing someone with such vision...!!
I really appreciate it man thanks 💯💯💯💪🏽💪🏽💪🏽
You the truth with it fam 👍🏾🔥🔥👍🏾
That’s funny cuz I learned from u big bro. Thanks homie 💯💯💯💯💯💯
Spray way u be all over the tube... I stay meeting up with u in somebody comments lol
@@rocbuiltit1460 good shit bro... I behind on u but u a monster bruh. I see u...
Sprayway i also follow u big bro and i love your content but big ups to the big homie @RocBuiltIt. Yall keep doin your thang cause its always a motivation for me.
You be killin it man! And that heavy duty stapler at 32:59 always makes sure shit stays tight👊✌Yes sirrr!
😂...thanks though bro 💯
Good to see another brother on CZcams grinding out the garage gettin it by any means.. imma sub to ya!
💯💯💯💯💯💯💯💯💯
Bro, you got the skills. I was glued to your video all the way through. I definitely appreciate the ideas keep em coming ✌️ 1
No problem man. And I appreciate u tuning in 💪🏽💯
I don't even do this type of work but this was so interesting to watch. I'm seriously thinking about doing this to my truck this summer. Great video. Keep it coming.
Go for it bro. I honestly thought I would get this far with it
I have a shop full of equipment and a creative mind. But I lack a little in skill sometimes. What you do is amazing. I'm impressed.
Thanks man I try my best. But just keep pushing and practicing. That’s the only way u can get better 💪🏽💯
Excellent craftmanship! Thanks for sharing.
Thanks. And no problem anytime 💯
i love your work brother you are inspiring me to do more fiberglass work myself...
Go for it bro. How u think I got to where I’m at today. And preciate it 💪🏽💪🏽💪🏽💯💯💯
8 really love your work brother. I’m learning a lot.
Thanks. I don’t mind passing on the knowledge 💯
Nice work bro! Built my fist pod after watching your vid.
Thanks bro. I love that type of inspiration 💯💯💯💪🏽💪🏽💪🏽
Lots of dilligence & patience great work
Preciate it fr 💯💯💯
Those are really nice, great work!
Thanks bro 💯
I appreciate the video man. Helped me alot.
No problem at all. And thanks bro 💯💯💯
you sir are one clever dude im watching all of these great work man looks great i have subbed and hit the bell
Thanks for the support and thanks for tuning in bro 💯💯💯💯💯💯💯💯💯💯💯💯
Bruh I'm glad I found your channel! Definitely gonna be using some of your tips on my c10
Anytime bro 💯💯💯💯💯💯
Damn I love them doors 🔥🔥
Great job my man!!!!
Thanks bro 💯💯💯💯💯
Amazing work Brody
💯💯💯💯💯
Awesome job bro.
Thanks man 💯💯💯
My dawg got jiggy with that jigsaw lol
Lol 💯💯💯💪🏽
Man bro I have a 2010 impala and I’m definitely literally going to follow you’re videos step by step to do my doors thank you so much man , I hope
You don’t mind I take you’re idea
Go ahead. And I appreciate u tuning in
That’s Dope Bro 🔥🔥🔥🔥
Appreciate it homie 💯💪🏽
Awesome videos man !!
Thanks man preciate it 💯
Best part watching is the jigsaw skills...and a cheap jigsaw at that....you can do great work cutting templates with jigsaw if you are good... then flushtrim router...35 years in caraudio..jigsaw is fastest..easiest ...respect
Thanks man 💯💪🏽
Your awesome my God bless you with more work so talented.
Thanks man preciate it 💯
Nice work!
Preciate it brodie 💪🏽💯
Yo you know after doing that fiberglass work along with the speakers and mdf layers your doors will truly be bullet proof 😂😂 no lie a person can do 5 layers of fiberglass and it straight up stops bullets in the range so I assume 1 thick layer w mdf after would probably do the same thing. Haha most people don't know this but if city is wild like my city ya never cab be too careful. So it's a win win. 😂😂
Fasho 💯💪🏽
New sub bro. I see u getting it. That takes skill and vision.
Thanks bro I really appreciate it 💯💯💯💯💯💯
That's hella nice bro.
Preciate sir 💯💯💯
Great job
💯💯💯💯💯💯💯💯
Great job again!!!!!
Thanks bro 💯
Congratulations. Excepcional job. Thanks for share.
No problem 💯💯💯💯💯💯
Great work
Thanks man 💯💪🏽
Lookin good bro
Preciate it bro 💯💯💯
Keep up the good work
Thanks man. Will do 💯💯💯💯💯💯
good job man, there's a channel called Magic sound, the guy is an expert in doors, here's the tip
Thanks. But I’m already subscribed to his channel
Great Job. I have a question . Do you ever have a problem when you mount the speakers, with space behind the panel
Thanks bro. And no. I test fit it before I wrap it with fleece
Молодец золотые руки 👍👍👍
Make sure your careful while cutting that fiberglass it can really do a number to your lungs of not careful
💯💯💯💯💪🏽💪🏽💪🏽💪🏽
This is awesome! Greetings from Russia
Thanks
Cold
💯
New sub 💪🏿✊🏿.I need to make videos to great job folks
💯💯💯 thanks bro
Damn fam.. Im sub to u now.. U the truth #TEAMSCHAEFFER
Appreciate it homie. 💯💯💯💯💯💯
Great video. What's that strip molding called?
Thanks man 💯. But I use this stuff I get from my job. It’s cardboard but it’s thick. Honestly u can use hard poster board material but u gone have to put resin on it to harden up. Or u can use that hard cardboard stuff in Home Depot but it’s not good around curves
Yo I just stumbled upon your videos...... I must say you got some really good skills...... I subscribe and like and if you are in Atlanta I might have you do something for my 1989 Lincoln Town Car....
Thanks bro fr. And I would love to but I’m not open for business at the moment
@@rocbuiltit1460 well Holla At Me when you are back in business cuz I'm really is into looking to get my interior doors done on my 89 Lincoln
Talented wood working
Thanks man I appreciate it fr 💪🏽💪🏽💯💯
Was that just white cardboard you was using for the flush mount of the pods
Yes. Watch the how to vids. I talk about it in there
Nice vid bro does the speaker's direction have importance?
Thanks 💯💯💯
What are you using to make the strips that goes around the pods?
I get this thin cardboard stuff from my job. U might can find it in stores cuz it feel just like poster board material...just a lil thicker. But if that wasn’t the case I would be using the thin flexible cardboard from Home Depot or Lowes
Okay bet good looking bro
🔥🔥bro
💯💯💯💯💯💯
Nise bro! 👍🤟
Thanks man 💯💯💯
JUST SUBSCRIBED FAM
Preciate it bra fr 💯💯💯💯💯💯
@@rocbuiltit1460 czcams.com/channels/XQ5kETNq3vaIgILUU8MwRg.html
how much extra do you etch out when cutting for outer edge of the face plate
for example @6:15
Its funny u ask. Right now I’m working on a video on how to make door panels. But on the look out. Part one will be uploaded later on tonight
@@rocbuiltit1460 bet bro been wanting to learn to do pods u got sum damn good content bro💯
Preciate it homie. Just make sure u stay posted and notifed for the vids and share the content
🐐
💯💯💯
What you use to wrap around the pods.
Just check out my how to videos on how to create door pods. Every single thing is explained in them
What is that white stuff you used around the pods
I get this thin cardboard stuff from my job. U might can find it in stores cuz it feel just like poster board material...just a lil thicker. But if that wasn’t the case I would be using the thin flexible cardboard from Home Depot or Lowes
Sup bruh lol:). I'm on here scrolling and saw this vid like "that's my boy! Lol". This is vendetta lol. Good shyt bruh keep up the good work:)
💯💯💯
👍👍👍
💯💯💯
👌🏽
💯💯💯
What are the white stuff you’re cutting @ 19:20 called and where can I find it
It’s some cardboard stuff I get from my job. But u can use poster board material. It works the same. Just have to put resin on it to make it stiff
DIY Guru901 It’s called Cornerboard, it’s used in pallets when being shrink wrap, so the product won’t shift and also for protection.
Gustavo I thought about using that stuff but idk where to find it in Georgia
👏🙏🎉😃😃
💯💯💯💪🏽💪🏽💪🏽
What’s the 2 bits you use. At 15:55 & 16:10
Flush trim and chamfer
How much to make door panels like this for a box chevy.
U in Georgia?
@@rocbuiltit1460 Virginia but what part of Georgia you in bro?
🔥🔥🔥🔥
💯💯💯💯
🔥🔥🔥
💯💯💯
Bro yo work is 🔥🔥🔥 I just subscribe to yo channel where u from bro
💯💯💯 bra. And I’m in Atlanta wit it
@@rocbuiltit1460 you do just your own car
Where did u get that cardboard frm man?
It’s some cardboard stuff I get from my job. But u can use poster board material. It works the same. Just have to put resin on it to make it stiff
Boi you nasty wit it
💯💯💯 my boy
@@rocbuiltit1460 I'm bout to try my 1st set of doors. Any tips?
How much to do front driver and passenger side on 95 Chevy caprice maroon and white
Sorry bro but I’m not open for business right now
Where do you get the outer thin part frm
I get it from my job
What’s the name of it
Honestly idk. It’s like some hard cardboard material
Dang I been trying to find it for 2 years now
Try typing in corner cardboard on amazon. A subscriber found it before on there
ta voiture et completement on bois mdr
Do you have cutomers or us it just your stuff
Sorry but I’m not open for business right now
When you open please let me know ;
thanks
Most definitely bro 💯
Good Бро 💪
Thanks 💪🏽💪🏽💪🏽💯💯💯
What was with the gun at 33min just curious
Already had it in my hand
@@rocbuiltit1460 when i saw it i was thinking oh snap hope he isent getting jacked or somthing stay safe
😂😂😂 naw I just play it safe out here
I'm being lazy about starting my own CZcams smh lol
Go for it
Where is thé next vid please
There is none. Really was just showing my skills to start off my channel
@@rocbuiltit1460 ok bro
Just Subscribe!! 💪🏾💪🏾
Thanks 💯💯💯💯💯
+90Kg