How to Make a SWAT Model || SWAT Hydrological Modeling
Vložit
- čas přidán 18. 06. 2020
- agrimetsoft.com/faq/How%20to%...
After preparing all the needed data and maps, Finally, it's time to make the swat model. All the process is described in the video, but remember there are lots of errors you may encounter during model building.
By the way, before watching this video, you probably need to watch previous videos, which I have taught how to install the Arcswat interface, prepare a DEM map, make a land-use map, etc.
One of the essential things you should note is the Lookup tables needed for soil and land-use maps. I described it in the video somehow, but if you had any questions about it, please ask in the comments section.
How to prepare usersoil file, can you share the link of that video?
Maybe this video is useful for you: czcams.com/video/FDF6bqhaRXc/video.html
Also, these are all of our videos for the swat model:
czcams.com/play/PLaT4Cfntnc9hqe8TYz4pokRbLgBfUduu-.html
This is really a very helpful video for my thesis work, and thank you a lot.
Glad it was helpful!
Hello sujit sir..i am also doing my thesis work on this ..i am facing many problem ..can i talk to you sir plz sir
I am also doing a dissertation on the topic of soil erosion using the MUSLE and SWAT methods as modelling. I hope we can discuss.
Thank you very much. It encourages me to go on with my study.
Wonderful!
very useful tutorial, i really appreciate it
You did very good work, thanks for valuable information.
Glad it was helpful!
Thank you Aida! Great
Thank you so much Agrimetsoft. This is a very educative tutorial. Please, How do I download free ENVI software? Also, my mosaiced rasters for NIR and NDVI give invincible map outputs and this has affected the masked output too. I obtained landsat 8 satellite images for Oyo state, Ibadan Nigeria. My second question is ' what am I doing wrongly?'. I could not proceed to processing on ENVI. Help please
سلام. توضیحات خوب بود ولی بعضی جاها گنگ و مبهم بود. همیشه میگن یک ایرانی هست که باعث افتخار جامعه مهندسین در خارج از ایران خواهد شد. پاینده ایران و پاینده باد ایرانی.
Thanks! It is very relevant video tutorial!🕯🕯🕯
You're welcome
Hi Sam. How did you download ENVI?
Thank you for your nice video. When run SWAT model, if I just choose, for example, '64 bit release', and calibrate without copy '64 bit release version of swat.exe' into swatcup. Is the calibration result effected by not doing this?
Have a nice day,
Did you first take any action for the DEM and Stream data you use in the program?
Thank You So Much !
You're welcome!
I really appreciate your effort, it is quit helpful madam
Hi! This is very helpful. I had a question, how to find the letter code for different types of point sources? As you used 'D' for wells, what should I use for a water treatment plant discharge point?
PLEASE WHERE DO I GET THE POINT SOURCES FOR DIFFERENT STATES IN THE USA?
Very useful and meaningful tutorial. Will be please make one tutorial on Calibration and Validation of Runoff estimation using observed discharge data?
We don't have any help person for SWAT
thats easy task
@@juneydiidris4431 Greetings please can I talk to you it seems you are Good Using the SWAT Model please
How do you select the point sources before modeling?
Thanks, so wonderful. Please also do the same for weather data as Asfand requested.
Thanks so much. I will. As soon as possible.
Already uploaded
While doing SWAT check... It is showing Specifies argument was out of range of valid values. Also, it is showing the file.cio is not formatted properly. What should I do?
Can you tell from where you got point sources in outlet
Thank you
You're welcome!
Madam, What is the version of ArcGIS you used??
thanks
Can SWAT analyze a small area of farm like potato plant with MUSLE method, where may I have a full tutorial and clear example. Thx.
Can we get groundwater recharge estimation using SWAT? If so what will the output show regarding groundwater recharge?
what was the projection co ordinate system of your dem data?
We don't have any help person for SWAT. Ask it in ResearchGate from Aida Gholami
How can I troubleshoot and resolve the 'error HRESULT E_FAIL has been returned from a call to a COM component' in ARCSWAT when I create streams and outlets on it? What are common causes for this error, and what steps can be taken to address it during the execution of ARCSWAT processes?
Kindly upload video about preparation of weather data
Sure. Soon it will be prepared.
Already uploaded
how can I find the manual to find the letter represent for dam in dbf file?
How did you prepare your river. Shp layer... For me I have made the stream order layer but it's showing error when I upload it.. Kindly help
Could your Stream order be still in raster format?
Had you tried changing it? From raster to polygon? Then from GCS to PCS?
(3 years huh😃)
I got an error message when I pressed stream network icon.... What to do?
Mam , in swat model lulc map is use in which formet..i have lulc map in tif formet but when i am going for adding this is not showing in the my folder why mam? Can you help me
thank you a lot !! how can prepare SWAT data ..? next what about SWAT CUP ..? if you have video concerning about it show me the link !!! any ways it is easy and clear presentation !!!
Thanks. You can find a video about swat cup here: czcams.com/play/PLaT4Cfntnc9hqe8TYz4pokRbLgBfUduu-.html
But the swat cup company say us to remove another video
正在学习
best
This is interesting tutorial. how can I get the agrimetsot free such as DMAP RDIT.
Could you please kindly tell me what is the time period of the data used?
Hallo. I want to know if i can Model with only data of a single rainfall season in ArcSWAT?
Can you please help me with an error that is poping on my screen "error:The Microsoft Jet Database engine cannot find the input table or query 'res' . Make sure it exists and that its name is spelled correctly"
We don't have any help person for SWAT.
hello, where did you get stream river data shape file?
can i input water parameters results like: pH, bio-oxygen chemical demand, dissolve oxygen and other parameters
How did you identify the point sources
Hello, congratulations on your video.
I would like to know if you can help me fix an error during "HRU Definition", when I click on "create HRUs", I get a box with the following message: "Error call stack sequence cmdOKLUSoilsfunctions.vd Error Number 5." do you happen to know how to resolve it? I would thank you infinitely for your help.
Greetings from Colombia
Hi, you can order in AgriMetSoft and pay for it.
@@AgriMetSoft
where can I communicate with them? Thanks a lot
@@juanpablot.6522 agrimetsoft.com/order
or
kolsoomi57@gmail.com
In swat database run
I’m getting the error of “ conversion fron string “ 12/31/3000” to type Date is not valid
Plz help
How to code and run Catchment best mgt practices using SWAT
My SWAT runs successfully but it is blank. It doesn't show any output data. I am unable to find the error. Can you please help?
I have a problem with this model I don't know if you could help me
I am facing problem in adding raster file, it's showing as fail to copy raster dataset,, plz help me to resolve, as possible as earlier.... Plzzz
it good
Wonderful!
Hi i have error in soil database error any help u can
your voice is so sweet
After clicking the examine model output I got a error it shows Reading output std... Finished reading output std in 00h.00m.03.97s. Reading output rch...Value **' is not an int. Can you please help me in this
Sorry, we don't have any support for SWAT
can i get model calibrations and validation section
sure. It will be uploaded in few weeks.
It's uploaded
Hello, I have a project related to SWAT modelling plz let me know if you can do it
Mam How to convert into gvf file...?
pls how can i model the climate change with SWAT
10Q
When I calculate the subbasin parameters, I get a message (topographic report:le separateur du champ de specification du fichier texte est identique au separateur decimal ou au delimiteur de texte.,), can you help me.
We don't have any help person for SWAT. Ask it in ResearchGate from Aida Gholami
thanks for the nice and helpful video, I have faced that error after clicking on the stream network could you please help me? Error Number -2147467259, and said a call to a COM component, and Modle name: mSWflow ...