How to Replace Spark PLUGS on 2006 Acura MDX

Sdílet
Vložit
  • čas přidán 11. 09. 2024
  • Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic

Komentáře • 83

  • @ELVISRN1
    @ELVISRN1 Před 3 lety +5

    I like to do 2 things.....lube the plug threads for easy install and truer torque and die-electric grease put on with a q-tip on the inside of the boot for easier boot slide and click and of coarse to keep out moisture. GREAT VID!!

  • @geoffreyhowells4871
    @geoffreyhowells4871 Před rokem +1

    Recently purchased a 2005 MDX with cylinders 4 & 5 misfiring. This excellent video mustard-up the courage to replace plugs and coils myself. Thank you much for the great tutorial and walk-through.

    • @RBTheMechanic
      @RBTheMechanic  Před rokem

      Good luck! Yup let me know hit it went

    • @TheCamwil
      @TheCamwil Před 4 měsíci

      Did it fix the issue?? Same problem in my 2005

  • @mightymoe4635
    @mightymoe4635 Před 4 lety +4

    Torque specs for the plugs on this car is 13ft/lbs.

  • @dennisskelton5086
    @dennisskelton5086 Před rokem +1

    Thank you very much. You got the best video on this. You're great

  • @beasignpost
    @beasignpost Před 4 lety +2

    Thank you! This was very helpful!

  • @mtbknow-how3795
    @mtbknow-how3795 Před 2 lety +2

    Yeah I have an 06mdx and currently getting about 10mpg. I think it's def time to replace her spark plugs and coil pack as well

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety +1

      Cleaning sensors might help as well oxygen sensors

    • @ecknowater
      @ecknowater Před 2 lety

      What sensors do you clean?

  • @A.Musa76
    @A.Musa76 Před 6 měsíci +1

    Where is the ant-seize on the spark plug threads?

  • @duboiss.p.i5985
    @duboiss.p.i5985 Před 3 lety +1

    You saved me bro thanks for vid followed ya steps and knocked it out .

  • @evanmeeden2222
    @evanmeeden2222 Před rokem +1

    Mine has an Issue with the VSA light turning on after about three miles of driving. IT drives well and doesnt pull to either side and the awd works jsut fine. Any ideas armano?

  • @chanobernal6884
    @chanobernal6884 Před 2 lety +1

    What if the Spark Plug Feels or it is getting Stuck What should I Do?

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      Don’t brake it try put some penetration oil/spray and let it sink in for hour or so worst come to worst take it to shop

  • @henrykang6612
    @henrykang6612 Před 11 měsíci +1

    Thanks for kyour video. I have error code p0301 on 2004 Acura MDX. any idea to fix it.

    • @RBTheMechanic
      @RBTheMechanic  Před 11 měsíci

      Misfire cylinder 1 do tune up and coil change on cylinder 1

  • @sajflydragon970
    @sajflydragon970 Před 2 lety +1

    Thanks man appreciate the help

  • @kidz919
    @kidz919 Před 11 měsíci +1

    What are the tools you're using besides the wrench and flathead screwdriver?

  • @johne4056
    @johne4056 Před 3 lety +1

    Hey RB, my 04 mdx has been having a power steering issue i think, and wanted to ask what component you think may be bad. Also had power steering flushed already. When you are holding a turn at over 15mph, the steering wheel "bumps" the other way, and (assuming you are holding the turn steady), will bump back to place. What could it be?

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety

      John E can you make video of this and post it on utube I need to see this and also is there any noise comming when u turn

    • @gerardomorales4078
      @gerardomorales4078 Před 2 lety +1

      @@RBTheMechanic did @John E ever post/share a video for this? My 2002 MDX I just bought used in Puerto Rico DOES make a sound when I turn all the way to the left or right.
      Just curious if you had anything to advise him.

  • @camilosatiro9126
    @camilosatiro9126 Před 2 lety +1

    Very good stuff

  • @kentsang6330
    @kentsang6330 Před rokem +1

    What’s the torque spec for the spark plug is same as 2003 mdx. Thanx

  • @kofrmthaland1634
    @kofrmthaland1634 Před 4 lety +1

    Hey RB I have a check engine light on my Acura MDX 2006 my code says it's misfires and now it smokes out my tail pipe and now it's smoking from my starter because I kept trying to starter it. U just put a fresh batter in it

    • @JR-wn8cl
      @JR-wn8cl Před 4 lety

      This is your car ? Damn bro. That’s fucked up.

  • @huynguyen-gt5um
    @huynguyen-gt5um Před 3 lety +1

    Good work sir.

  • @hectorsanchez2146
    @hectorsanchez2146 Před rokem +1

    This spark plugs don’t need to be calibrated?

    • @RBTheMechanic
      @RBTheMechanic  Před rokem +1

      U mean the gap? U can do that u should most plugs are like already at the oregano but u can spend extra 10 get the gauge and check the gap speciation for ur vehicle

    • @dannyzamudio1252
      @dannyzamudio1252 Před rokem

      ​@@RBTheMechanic whata the torque epecs for the spark plugs?

  • @rokitman5753
    @rokitman5753 Před 3 lety +2

    Always always always use OE plugs . The engine wasn't designed/built with parts from NAPA

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety +2

      I try to use NGK or denso but some customer bring their own stuff then I just got to do it

  • @joesalameh1084
    @joesalameh1084 Před 2 lety +1

    Great 👍

  • @kofrmthaland1634
    @kofrmthaland1634 Před 4 lety

    And also in this video 14:14 that black box that not above the engine what it's that? My Acura does not have that plug on the right closest to the motor? What does that go to?

  • @anglegrinder4630
    @anglegrinder4630 Před 4 lety

    will this procedure fix my error codes misfire 1-6? p.d.(pending determination) on all,or should i do a valve adjustment?money is tight so i can barely pay for 1..my best case would b to get a coil/plug package and DEFNLY do it myself,honda wants like 400 for a full tune up and all my liquids are fine air filter etc

    • @RBTheMechanic
      @RBTheMechanic  Před 4 lety

      SuitLoops before you do this watch is this other video I have on Acura TL it was mid firing random cylinder you maybe have similar issues I can test by swapping coils

    • @RBTheMechanic
      @RBTheMechanic  Před 4 lety

      SuitLoops here’s the link to that video czcams.com/video/_YC27w9CRKQ/video.html

  • @fanfan58
    @fanfan58 Před 2 lety +1

    wish you show live how you do the back spark plug replace

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety +2

      They are same as front same same the last coil at the end is blocked by the coolant lines u can slightly just push the line and coil just comes right out

  • @sebestiensoliz2075
    @sebestiensoliz2075 Před 3 lety +1

    RB. Can you do a video on replacing the fuel filter on the 2006 Acura MDX Touring Package? I mean where is it, even?

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety

      It dosent have fuel filter none serviceable there is a strainer on the fuel pump which keeps everything out from even enter fuel filter which works like filter no need to service

  • @joycecresser5884
    @joycecresser5884 Před 3 lety +2

    What size socket fits the spark plugs on the accuracy mdx?

  • @TheFire1202
    @TheFire1202 Před 3 lety +1

    Why not replace the coils as well?

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety

      Don’t need to unless they go out but it’s ur choice

    • @TheFire1202
      @TheFire1202 Před 3 lety +1

      @@RBTheMechanic cool thanks, the vehicle is almost at 200k so ill do the coils. Great video

    • @TheFire1202
      @TheFire1202 Před 2 lety +1

      @@RBTheMechanic My hands hurt from doing this. I'm 5"5 and had to use a ladder for the back ones. Your video helped a lot, thank you again.

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      @@TheFire1202 yup back ones I used oil box to step on

  • @r.m.6978
    @r.m.6978 Před 2 lety +1

    Rb. If the check engine light blinks that's the engine misfiring

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      Yup so u have misfire scan the car for code and check that cylinder for issues

    • @r.m.6978
      @r.m.6978 Před 2 lety +1

      Thank you hermano

  • @anglegrinder4630
    @anglegrinder4630 Před 4 lety

    its like looking into my engine well,these things all wear exactly the same

  • @jamye2881
    @jamye2881 Před 3 lety

    Why are you installing Ford plugs in a Acura

  • @Mr.3LC
    @Mr.3LC Před 4 lety

    Why didn't you show how you did the back spark plugs

    • @RBTheMechanic
      @RBTheMechanic  Před 4 lety +2

      Mr. 3LC same process just the back camera angle is not good

    • @MrRoppppp
      @MrRoppppp Před 3 lety +1

      He didn't do the back

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety +3

      @@MrRoppppp yes I did

    • @maryboni8658
      @maryboni8658 Před 3 lety +1

      @@MrRoppppp Don't be a troll

    • @ELVISRN1
      @ELVISRN1 Před 3 lety

      @@MrRoppppp coils were laying there from the back

  • @klujics123
    @klujics123 Před 2 lety +1

    The dealer wants close to $300, they are crazy.

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety +1

      Ohh they crazy DIY bro

    • @klujics123
      @klujics123 Před 2 lety +1

      @@RBTheMechanic I was calling for the cost of a valve clearance adjustment (I have 325,000 on an ‘06 never had an adjustment) they told me with a new valve cover gasket it would be about $550 which was a lot less than I was thinking.
      They asked about doing changing the plugs told me (they like to do it all at the same time- I bet they do lol) it would be close to an extra $300.
      I used your video a couple of years back and had changed them myself.
      Thanks for the reply.
      On a side note every 7 years if you think back the market has had a down turn about this time of year. 80, 1987, 94, 2001, 2008, 2015, 2022? Of course some of those years are very notable others not so much. This coincides with the Schemata year, you can look it up if interested. But not sure about the future but if the cycle is true to form we will know in a few weeks. So might be careful with any investments until October to be on the safe side. Just something to consider. God Bless. Anything occurs feel free to reply back if you like… as I might have more to add. Take care.

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety +1

      @@klujics123 wow that lot of milages but it sure gonna need it I’m doing the valve adjustment on my accord very soon I will make video of it

    • @klujics123
      @klujics123 Před 2 lety +1

      @@RBTheMechanic what’s even crazier is I bought this from a guy who had all his service done at the dealer. They never recommended a timing belt… 306,000 is when that OME part was replaced. Though that does say something about the quality of Honda parts that it lasted that long. Take care.

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      @@klujics123 yeah Hondas last long time I got 2004 accord it’s still running original water pump I put in alternator in 2014 original from dealer

  • @kaylam6220
    @kaylam6220 Před 3 lety

    Code P0497 need help 06 Acura MDX

  • @xtraCreamcheese
    @xtraCreamcheese Před 3 lety

    Autolites in a honda...ughhh