Toyota Remote Start Using Only Your Key Fob!
Vložit
- čas přidán 28. 07. 2020
- 2018-2020 Toyota Tundra remote start installation for under $200! Kit works for all Toyota’s but this is an install on a 2019 Tundra
Here’s the link for everything I’ve put on my 2019 Tundra Build! Check it out if you’d like!
www.amazon.com/shop/kccreations - Zábava
Best one handed mechanic I've over seen. Well done.
Hahaha thanks so much! Lol made my day!
Man you have no idea how helpful was your video I got my started kid for my 2018 Toyota Tundra this morning I did the whole process using your video!!! Thanks
Man keep doing videos like this...👍👍🙏
I recently found your channel and enjoy your videos. I just bought a 2019 Tundra TRD Off Road same color. I referenced this video today while installing my X-Start remote start kit. Your video was much more informative than the video mentioned in the installation instructions and made my install much easier. I have watched some of your other Tundra videos and I am looking forward to installing some of the same mods. Thank you for your video and keep up the great content!
David that’s so great to hear I really appreciate it! I use the remote start daily and it’s been great especially with it getting cold. I hope you are loving your truck as much as I am. Thanks for commenting man have a good night!
Thank you for this video. I appreciate how easy you made this for me. I installed this today and it was 108 degrees outside and was able to get it done in an hour thanks to your video.
Goodness that’s a warm day! Glad it was helpful for you! That’s my goal! Enjoy man!
Wow beautiful, I’m about to get my 2018 tundra and wanted to get an automatic starter for it. I was going to have someone else do it since I’ve never really done work with vehicles but this video motivated me to do it myself. You have a subscriber for life !
Thank you! You did a fantastic job of camera work and explanation. I just finished. All is working fine. Thank you. Well done!
Thanks so much that’s means a lot! It can be hard to keep filming when you just want to get things done but it’s worth it if it made someone else’s project a bit easier! Thanks for watching!
Not gonna lie bought the compatible model for a 2015 SR5 Tundra, the instructions sent were for a 2nd gen, and my wiring harnesses were significant different; 2 harnesses with everything wrapped together so it was difficult to manage all the wires/clips without being to separate them fully like this.
Also the TPMS bypass if anyone is reading my comment and trying to figure it out like I was, under the passenger glove box, remove the bottom kick plate and look up for a yellow wiring sleeve for the air bag, the clip for your new bypass is directly in line with that.
You’ll have to feed the wire the behind the center console there’s quite a bit of space, I was able to just literally push them through behind and grab hold from the passenger after. No need for a coat hanger and tape.
All said and done she worked, took an extra 30 mins to figure it out.
Thanks for the template for me to go off of!
you did a precise step-by-step video presentation. Thank you for sharing your experience.
Thank you, great job, especially the part about the kick panel and the color code for the programmer.
Thanks for the informative video. Very helpful during install. Took me about 45 minutes start to finish. BTW. The 13/32 is actually 10mm. I did have to do the master reset because i held the button too long when plugging large plug into module. I was able to do that with everything else plugged in, then do the 10 button press. Thanks again! Much better than company video.
Oh good to know thanks man! I’m going to be doing it on my dads 14’ tundra this weekend! Hope you enjoy it and thanks so much for the positive comment!
I love this vid. Thanks for showing the whole process, I was able to do the installation painlessly thanks to you
No problem! Glad I could help!!
Just bought a 2019 SR5 Trd off road 4X4 I freaking love it! My toy but not daily driver lol.
Thanks for the video! Helped me install mine. Should Have done this a long time ago.
No problem hope you enjoy it!
Good job. You explained this so well. Thank you.
Sue Mosher thanks grandma!
Thanks men !!!! I just get it and installed it in 45 min Thanks to your video
Perfect!! Thank you.. it works - great video with the instructions
Excellent job!
Great job on this video explaining and everything thanks a lot
Nice job man, thank you for your time.
No problem! I'm glad it was helpful!
Sweet video. Looks like I need a remote start now lol
Just installed this today. Great job on the video! It is far superior to the one that Start X includes via QR code. They should QR code YOUR video! Thanks for the help.
Glad it helped! That would be super cool! lol
good Vid Bro! Thanks for taking the time to show us regular joe's how to do what toyota should have done for us! Nice to have in cold weather and hot ass texas!
We're all average joes here! lol I agree it would have been nice to have it standard for sure. My dad lives in Texas and has said the same thing about the weather. Enjoy it while you've got it! It's in the single digits here!
@@kccreations5945 Thanks Bro, loving this cold snap, gonna try to bottle some up for the summer!
@@tmccull98 hahaha I bet so! I lived in Abilene for 6 years for college so I understand that heat well!
Awesome help buddy, thanks 🙏
Great job kiddo!!! Super informative vid.
Thanks so much!
Ironically your 5.7 sounds just like my 2013 Sequoia. Yeah sure same engine but also same exhaust apparently. Good video, helpful!
This kit uses a Fortin EVO ONE. Recommend getting the programming module as well so you can change the settings to your liking.
Fantastic cant wait order mine thank you
I love mine! Hope you enjoy man!
Well done vid! Thanks.
You did a great job!
Thank you!
Great video young man.
Thanks so much! And thanks for watching!
liked and sub. thinking of doing this to my new 2019 tundra. thanks!
Thanks man!! I hope you enjoy it!
Amazing vid with great detail and explanation. I've been watching you for a bit and just bought a 2021 Nightshade Tundra. Looking forward to getting it and thanks to you and your vids, I feel I can tackle some projects myself. One question - what is the make of your tonneau cover? Thoughts on it? I was looking at the Rhino one. Thanks again.
Hey thanks so much I really appreciate the kind feedback! That's a sweet Tundra you bought! I have the undercover armor flex tonneau cover. It's been great! It's made in the same factory as the super common BakFlip cover, but it has a longer warranty on it which I was happy about! You won't see it in many of my upcoming videos until winter because we just got a truck camper so I had to remove it, but I'll reinstall when we start getting snow again! lol Thanks for watching and subscribing!
Great video Thanks to sharing. Sr
Just ordered one myself. Hoping to use your video to help me along the process. Price has gone up to $199 ($211 after tax) as of 5/19/23. I just got myself a 2019 Tundra Limited and have some ideas for mods after seeing your videos. Thanks for posting!
Hope you enjoy it man! Thanks for watching! I use it everyday (every startup) and it hasn’t let me down yet!
@@kccreations5945 Awesome. I was curious how it's been working for you given that this was a few years' old. I really like that it doesn't cut off when you open the door like the stock one (or require a subscription??).
I've watched your entire Tundra series and am curious to see what happens with your recent maintenance issues. I've seen others tout the Pedal Commander too but haven't seen them experience the same issues you were facing. I'm pretty conservative with my anticipated mods and performance upgrades are low on the priority list. Either way, I'm staying tuned!
Nice video
Great video. One question, once you get into the truck, would you just insert your key and turn to the on position?
I got one from the same company for my 13 TAL, it is doing exactly as described and its still working after a few months
Thanks for the awesome video! I ordered the same one however, my 14 tundra is a little different. Maybe its an older model start x?? But when I get in, mine shuts off so I would have to restart it with the key instead of pressing the brake pedal to clear the tpms sensor. Overall satisfied and happy to have found your video!
Hey man! It's a different kit for the 2014. I installed it on my dads 2014 tundra and his does not turn off when he gets in. He just turns the key and is able to go at that point. Let me know if you have any other questions about it!
@@kccreations5945 hi, just reading through the threads. I bout a 2014 tundra trd just a couple months ago. Looking to install this in my truck as well.
@@nishadawn7 awesome! Hope you enjoy!
@@kccreations5945 haha! Still watch your vids, dude! 🙌🏼 TY!
@@nishadawn7 thanks I appreciate it!!
Very good!!
Thanks so much!
Love your content man. How come you didn’t get the OEM Toyota VIP remote engine start?
I installed it just like you, but I have one question. Where you put the ground does the plastic in between the metal or the truck and the black stop the ground from working correctly? I see that there’s a ground below it.
Can this remote be connected to two different keys?
I used your video when installing my x start back in November every was working great until I rest my TPMS now it just shows - - - for each tire position have you come across this if so how did you fix it. I did the normal trouble shooting for tpms let it sit for 20 minutes in the on position, deflated and inflated tires , even drove 170 miles still showing- - -.
Incredible work once again! Do you know if this will work for the 2021 tundra?
Thanks man I appreciate the compliment! I don't know that I could say for certain... But I would imagine so since they haven't changed much, but my dad's 2014 was a different system than mine, so I really can't say for sure.
I added lights and had to take of battery terminal now I can't get auto start to work.. any advice. I tryed to unplug it all and redo it but it's not working 😭
Does it work for my 2014 tundra?
Great videos man. Do you know if you have to reset the auto-start programming if your truck battery dies or needs to be replaced?
I don’t believe so. I have unhooked my battery since I think and it still works fine! Is that an issue for you??
Is there one. For 2013 sr5 crewmax tundra
Great video Thank you - how far away does remote work? Hoping at least 20 - 30 yards
Oh man I think I did if from like 50 yards the other day. Clear line of site though because I want to see the lights flash to make sure it's receiving the clicks!
Great video man, any problems with the remote start? I’m planing on doing the same to my tundra.
Hey thanks! No I haven’t had any issues, I’ve been using it probably every other time I start the vehicle since I got it and haven’t had any issues since! Let me know what you think when you get yours installed!
Hey there !!!
Wanna say awesome job doing most of that with one hand!!
Could you comment on the range of the remote start?
Thanks
I have it and it’s the exact range of your key. Whatever distance your key will reach, your remote start will work.
Thanks!
Okay for those of you having a 2018 Tundra who can’t use the key fob to unlock your doors while truck was remote started you may have used the wrong white connector location for the TPMS harness. Apparently there are a couple white connectors that will fit the Start-X TPMS connector. At the very base of the foot kick cover you will see 2 BLUE connectors one high one low. Focus on the lower BLUE connector and the WHITE connector on the LEFT is the CORRECT connector location for the TPMS connector. Once that is done you will be able to use your key fob to unlock your doors. Thanks Start-X for sending me the picture of the correct location. Hope this helps out everyone.
That’s awesome man thanks for sharing!
@@kccreations5945 You bet! This connector location may be for the 2019 Tundras as well since the TPMS connector mentioned 2018/2019.
Been 2 months now since Start-X installed and it still works fantastic! Best mod I did so far yet not happy that auto start was not done at the factory especially on a Platinum Edition. Quality has been slipping.
Do you happen to have that diagram handy? I have a 2017 and I am having this same exact issue. I got the plug and play kit so I'm trying to figure out what went wrong
yes same pls send diagram thanks brotha!
Can it be work on my 2007 tundra thanks
Does this work on 2011 corrolla?
Thats so dope. You need to turn the key to get out of park or no?
Yes you have to turn the key to on when you get it. But don't turn it as far as you normally would or your grind the starter. So just turning it forward till it stops!
Excellent video. Great job showing what you did and explaining it. Do you have the SR5 package? Also, what brand/style are your running boards? Are you happy with them?
Thanks man! Yes I do have the SR5 package! The link to the runningboards are in the description of all my videos! So you can check them out. But I have been pretty happy with them. I have contemplated getting ones that run more flush with the cab for when I do some light Off-roading, just so they don’t drag, but I’m not sure if I’m going to do that yet!
@@kccreations5945 cool, thanks. Trying to figure out what's different between our trucks. I know I don't have a keyed ignition.... everything else looks identical
@@TheDingpud Do you have a 2020 model??
@@kccreations5945 Yep. Its a 2020 SR5 TRD Crew Max.
Where are those headlights from ?
im looking at this kit to install but im nervous as I have a 2020 model and can't find any good videos on how to wire that.
I would think it would be the same honestly but idk for certain
This may be a dumb question. But you can still start the car normal right? If a friend barrows the car, or if I take it to the dealership to get maintenance. Also does the new OBD2 mess with anything???
Yes everything works normal! I’ve taken it to the dealership and had no issues!
Thanks for the video! I am confused, what does the TPMS have anything to do with remote starting?
To be honest I'm not super sure. I just know it's a feature that is synced into the ignition or something like that and has to be bipassed to use the remote start. But if my tires get low the light still works and all that so it doesn't negatively affect anything. But I can't give you a technical reason why! But thank you for watching!
just all this convenient technology is designed to protect the operator. there are many who will drive off on a flat tire.though the warning is clearly lit.
Great video! Thanks!
No problem! I'm glad you enjoyed it!
OK, what am I missing. I have not installed anything special, just hit the unlock button 3 times and my truck starts. However when I go to open the door, the engine shuts off.
You got a good video. Did you put a cell phone module with it. I like to see video if you have it
No cell phone module... Can I get one of those for this??
Excellent vid my friend but I can't find this wires on your page .....is any reason?
Here is the link if that’s what you mean! www.amazon.com/dp/B07P1NDL1W?linkCode=ssc&tag=onamzaustin06-20&creativeASIN=B07P1NDL1W&asc_item-id=amzn1.ideas.1W7HU2OBYKOUZ&ref_=aip_sf_list_spv_ons_m_asin
Just bump the key don’t have to hold it till it starts
Does the TPMS light alway come on when you use remote start. So you have to turn on and push brake everytime.
Ok good! I wasn’t the only one. I was freaking out since i just got my truck. But i guess is just alil side effect? Hopefully
TPMS LIGHT comes ON with every start remote or just normal key use.
Hi, I just intalled this kit and it works great but for some reason before starting the truck the horn activate, any comment?
I have not experienced that issue... I'm sorry I don't really have a guess on what could be wrong. I'd call them company and explain what's happening!
Hey bud did you ever add the mobile phone link to your x start ?? If so I was wondering if you could give me info on the install .. I did the x start on the 2020 tundra but bought x start suggested car link for mobile phone link .. Thanks
I did not. I didn’t know that was an option! Lol I’ll look into it!
yeah man your vids and recommendations are great i got this same kit as well. I have one lol prob though. after i installed the kit and everything to the tee it still won’t unlock nor turn off. any insights on that?
I just installed one today 2018 CM . Can’t enter locked truck using key fob. I used the TPMS harness as per instructions. Now I have to use the key to unlock the door. GRRRRR!!
Manual says to manually depress brake pedal to turn off motor.
I just recently subscribe on your channel, you think this kit will work on 2021 tundura.. seems nothing yet for 2021 on amazon. I leave in canada were winter is almost 8 months long... i need this one hope heard from you.
Hey man! I don't see why it wouldn't but I don't know that I can say for certain. But honestly I think it would, and if it didn't you can always send it back!
My truck doesn't unlock from the fob, i have to insert use the key to unlock and i can't shut it off either. Anyone had that issue?
When I use remote start I have to insert key to unlock door. 2018 CM Platinum. How did you fix this problem??
Yesterday I installed this on my 2021 Tundra. Everything works great except I cannot unlock my doors with the remote. I have to put the key in the door to get in. Anyone have the same problem? Is there any way to fix this? Thanks for the video and your help.
2018 CM installed today…same dang problem. Grrrr!! TPMS lights up in the dash any time I start the truck and will turn off in a couple minutes so wiring and programming was correct.
Update. I had the wiring plugged in the wrong spot. Now the keyfob unlocks the doors like it is supposed to. No problems once I connected harness to the correct plug. Start at top of Comment section and read my solution/fix.
Will it work for 2012Tacoma 6 speed manual?
I'm not sure, check the link in the description and it will take you to the amazon listing. That should tell you!
will this works for toyota tacoma 2drs 4 cylinders 2011?
I don't believe so. But there are other models on amazon!
How long does the truck run after you remote start it, before it shuts down?
Manual says 15 MINUTES
Are you in Kansas City man?
It work on the 2021 Toyota Tacoma 4 cylinder?
It'd be a different kit I believe!
Have you looked into mirroring your phone to the screen to play movies and other apps??
No I haven't but if you figure something out please let me know! Thanks for watching Torrance!
@@kccreations5945 look up Phoenix (HU) Automotive head unit. Its a Tesla unit for tundra also Naviks has a bypass system
Can you drive the car without the key in the ignition fob? Not familiar with how remote start works lol
No. Once you put foot on brake pedal to put into drive gear the motor shuts off…you need key inserted and turned to ON position in order to operate and drive.
Have you had any problems with your automatic headlights not working? I’m debating this system or the one by 12 volt solutions.
I have not had any issues with it whatsoever! So I'm sure either system will work for you! You just get an awesome install video with this one lol! Thanks for watching man
@@kccreations5945 I just ordered the one from 12 volt solutions.
@@kccreations5945 thanks for replying back to me
@@KeystoneTexan I'm hurt man... lol JK Hope you enjoy!
@@kccreations5945 sorry dude! The lack of customer service was the only reason I went with the 12 volt solutions instead. But the their installation is pretty much the same as the start x.
So I just installed the remote start and I noticed the auto feature for the headlights doesn’t work. Any idea why or is that not related to the remote start?
I wouldn't think that would be related. At least I haven't had any similar issues. I'm sorry to hear that man.
Installed today in 2018 CM…pressed key fob 3x and auto starts right up. The outer halo and yellow side marker and fog lights turn ON in the front of the truck. Running lights turn ON in the rear of the truck. I depress the brake pedal using key to enter the truck. The motor shuts OFF, I close the door and within 15 seconds the doors auto lock.
I know it’s been 3 years since you uploaded this but does your remote start still work? Or has it given you any issues?
Yeah I still use it every time I start my truck honestly! It for some reason takes 4 clicks now instead of 3 but I’m not sure what that’s about lol
I bought this but on the step of connecting the main harness to the box and getting the red and blue light is where I get stuck. I only get a solid red light
Would this be the same for a 2018 Sequoia?
I would guess so, but I can't say for certain. Check the link in the description and their may be people in the amazon comments who have done it. That may be your best bet!
Great video! I just subscribe to your channel.... I'm just wondering if this kit works on my 2014 tundra platinum
Here is the link for the kit I installed on my dads 2014 Tundra 1794! It worked great!
Start-X Complete Plug N Play Remote Starter kit for Toyota Tundra 2010-2017 || Zero Wire Splicing! www.amazon.com/dp/B07VBHNBHS/ref=cm_sw_r_cp_apip_pOCDUUxCzXrHy
Awesome thanks for the link !
@@amoreno6917 No Problem! If you have any questions let me know. I just installed it on my dads a month ago so it's pretty fresh! It's a little different than my video but still easy to figure out if you look up the install video on the amazon page for it.
I just installed it but when I started it The TPMS light pop on the screen. What the problem with it?
Mine comes on too. Once you turn the key forward and put your foot on the brake the light will go off. It is recognizing the wire you installed that connects to the tpms wiring harness. So it's all good!
@@kccreations5945 thank you!
Does the TPMS light come on everytime you remote start or just for the very first time after install.
👍👍👍👍👍
Everyone ether seems to go with 12 volt solutions or Start X and I’m not sure what to go with ! Do you think one is better than the other ? I see way more 12 volt solutions on CZcams than start x 🥴
Hey man. I just watched a video on the 12-volt system and the process is the exact same as the one I did. They did say in the 12 V video that there were two spots where you had to splice wires, which you don’t have to do with the system. So that could be a big factor if you don’t want to splice any wires. But other than that it’s the same! I’ve used mine a lot since I’ve had it and had no issues!
I saw that too and I definitely don’t want to have to splice any wires if I don’t have to . They claim “plug and play” but it’s not 100% which is concerning . I think I might just have to get someone put it in for me or something . I’m not sure what splicing and not splicing changes in how the remote start works . But I’d prefer the start x after this video and I’ve heard of some issues with the 12 volt solutions one , but I couldn’t find anything on the start x website about remote starts for 2014 and up I think it was just like 16-18 or something
@@kamehamehawave66 The one I used says for 2018-2020. I would assume it would work since it’s all basically the same but check the review on amazon because a lot of times people will post if it works for certain years!
@@kccreations5945 that’s a good idea I always forget to read the reviews lol . I’ll check it out . Thanks for the feedback man
@@kamehamehawave66 No problem! I'm here to help if I can!
Do you knw what's the button that came with the kit for??
Hey Luis, I'm not sure exactly. I don't specifically remember a button, but I know I didn't add it so I'm not sure what it would do. Sorry!
Per Instructions: Hood Pin. Adding hood pin prevents the remote starter from accidentally being activated while hood is open. Thinking safety precaution.
Hey KC how has the remote been holding up?
It’s been pretty good! Sometimes I think it takes more clicks then it should to start but other times it’s perfectly fine. So I don’t know if that’s my remote battery getting low or not. But overall it’s been great!
@@kccreations5945 Thanks for the quick reply
Will that kit fit 2018 Tundra Limited?
I would assume so! I have a 2019 SR5 so we both have the upgrade electronics that took place in 18' so I would think so!
Just installed on 2018 Platinum and it works fine. Just have an issue that I can’t use key fob to UNLOCK door I now have to use key to unlock and enter truck. EDIT: I have it fixed now and the keyfob unlocks the doors. All works perfectly now.
I installed this and did everything exactly the way you did it but my truck don’t unlock with the key after it starts
Like when you click unlock it won’t work or when you out the key in the door and turn it it won’t unlock?
@@kccreations5945 ya so I close the door do the 3 clicks with the lock to start it and it starts just when I go to unlock the door with the unlock button it doesn’t open I have to use my key
@@alpinestarzR1000 I just installed X Start today and have the same issue…key fob won’t unlock if I used the remote start. Grrrr!! How did you fix this problem???
@@jimbotag7236 how’s it going, lol I just use the key to unlock it that’s the only way, you have to walk up to the door and manually insert the key and turn it to unlock it but u can unlock all the doors if you turn it once to the right then turn it again to unlock all doors
@@alpinestarzR1000 Hi. Please start at the very beginning of this Comment section I posted commentary of the correct plugs to use on the left side kick panel. You and I had the plugs in the wrong places. You will see after reading. You will fix your problem and you will be able to use your Keyfob to unlock your doors.
do you have to insert the key to put it into drive?
Yes and turn it forward!
@@kccreations5945 ah was hoping the keys could stay in my pocket like in a push to start model.
@@jessecardona5524 Oh yeah that would be great!
Will it work on the 2020, the company said it will not start and the company never email me back.
The link that I included in the description it shows that it will work on a 2018-2020!
That was a hood latch safety switch.
They must’ve gone up in price.
What are they now??
@@kccreations5945 $230. I still bought it 😊
@@ZNP25 oh nice! Not too much more I don’t think. I don’t remember exactly. Hope you enjoy man! Comes in handy when it’s so hot out!
@@ZNP25 Very nice! Enjoy man!