Best Mid Price 1/2 Click Style Torque Wrench? Craftsman Lexivon Husky Icon Gearwrench Sata Kobalt

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • Testing 250 Ft-lbs torque wrenches before and after 1000 cycles, with some interesting results.
    Craftsman
    amzn.to/3HAQ36w
    Husky
    homedepot.sjv....
    Lexivon
    amzn.to/3mYgLg3
    GearWrench
    amzn.to/3y3FkhQ
    Sata
    amzn.to/39IFpOu
    Kobalt
    www.lowes.com/...
    Icon
    Fixed
    www.harborfrei...
    Swivel Head As Tested
    www.harborfrei...
    DISCLAIMER: The links in this description could be affiliate links. If you purchase a product and/or service with the links above I could receive a small commission. This is not an additional charge to you!
    Thank You! for supporting the channel, this helps in me providing new content each week!
  • Jak na to + styl

Komentáře • 100

  • @AraceaeFanatics
    @AraceaeFanatics Před 9 měsíci +6

    I just picked up the Craftsman 250 ft. lb. torque wrench on sale for Christmas at only $65 and this helped me feel better about my purchase.

    • @Tools-Tested
      @Tools-Tested  Před 9 měsíci +1

      Nice! Yeah it’s a good wrench for the $ IMO.

  • @dylanfinch6186
    @dylanfinch6186 Před 9 měsíci +6

    Surprised your channel hasn't gotten way more viewers yet, definitely deserves them. I have watched all of your torque wrench videos and checking out others. I've also started buying and testing more torque wrenches of various styles. It's addicting to get into. I got an Icon after using a snap-on and it's a solid tool. I tested a husky first given it's lifetime warranty. The Icon is a huge upgrade. It's just so much easier to feel it reaching the click and to use. Further, the husky has a lot of play and the Icon is tight. Thanks for creating these.

    • @Tools-Tested
      @Tools-Tested  Před 9 měsíci

      Yeah maybe someday the channel will grow. I agree the Icon is the best value. No problem!

  • @bulletsforteeth5029
    @bulletsforteeth5029 Před rokem +6

    Used the Craftsman to install new heads on a Ford 5.0 engine, did the job just fine.
    I use various tools, but for TW's Craftsman has always been my goto and never let me down.

    • @Tools-Tested
      @Tools-Tested  Před rokem +2

      Yeah it’s a nice torque wrench, it’s interesting that through all the changes with craftsman they have always made a good torque wrench.

  • @Michael_78
    @Michael_78 Před rokem +3

    I just bought the Husky and I feel so much better about it after watching this!

  • @RM_Garage
    @RM_Garage Před rokem +2

    I'm honestly shocked you don't have more subs. This channel is great and is bound to explode in views soon!

    • @Tools-Tested
      @Tools-Tested  Před rokem

      Yep other views have said the same and that the channel was actually hard to find.
      But hopefully that changes soon!

  • @mediocreman2
    @mediocreman2 Před 2 lety +5

    Great video. That Husky surprised me. A lifetime warranty as well. Not bad.

    • @Tools-Tested
      @Tools-Tested  Před 2 lety

      Thanks! Yeah to be honest they all really surprised me. I was only thinking half would pass after 1000.

    • @Tools-Tested
      @Tools-Tested  Před rokem

      @hellsfavoritesaltyberserke4724 sadly all by hand, was going to build a jig but don’t want to risk damaging mechanisms.
      It’s actually not that bad just time consuming.
      CDI actually sells a auto cycle tester but it’s $100,000…….

  • @AppleTechPro870
    @AppleTechPro870 Před 9 měsíci

    I bought Kobalt 3/8” torque wrench and love it. Have no issues so far. I came here to see 1/2” and as expected it has good results. So far I am in between choosing Craftsman’s and Kobalt. I have seen mixed reviews saying that Craftsman ratcheting mechanism catches and locked up.

  • @dirtyvinyl8817
    @dirtyvinyl8817 Před 2 lety +6

    Just picked up that Icon today 20% off, i chose it cause it proved to be the one most accurate for the price across multiple reviews. plus i like the all metal design. what ive noticed from watching so many reviews is that the same torque wrench can have different results which is why i hesitated on the lexivon, one result would show perfect numbers but another would show barely passing or not passing out of the box or after 1000 cycles.

    • @Tools-Tested
      @Tools-Tested  Před 2 lety +2

      Nice! The 20% definitely helps.
      Yeah the Lexivon is a toss up, this one passed but not the 150ft pound one I tested.

    • @surferdudemi
      @surferdudemi Před rokem +2

      Where's a 20% coupon when you need it?! Ha ha. I'll likely go with the Husky

  • @stevew3978
    @stevew3978 Před rokem +1

    I bought the same Craftsman torque wrench shown in this video. I then checked the torque accuracy with a Quinn digital torque adapter. I set the torque of the Craftsman at 76 ft-lbs. When I turned the Craftsman's handle very, very slowly to creep up to the set point of 76 ft-lbs, the Quinn torque adapter indicated that the Craftsman peaked at 81 ft-lbs when the click on the Craftsman engaged. However, when I turned the Craftsman at a somewhat fast, average turn rate, the click happened at around 75.8 ft-lbs, pretty close to the torque setting. The moral of the story is that click-type mechanical torque wrenches should not be turned too slowly. They should be turned at a decent rotational rate to click at the correct torque setting.

    • @Tools-Tested
      @Tools-Tested  Před rokem +2

      Yep defiantly a technique to it that can be over looked. The Quinn adapters make for an easy cheap way to check your torque wrenches.

    • @GeorgeTsiros
      @GeorgeTsiros Před 10 měsíci +1

      this sounds very suspicious 🤔

  • @kbj8594
    @kbj8594 Před 2 lety +2

    You deserve more subs bro…keep up the work. Im sure youll make it

    • @Tools-Tested
      @Tools-Tested  Před 2 lety

      Thanks! Yeah that's what everyone keeps saying. My goal is 10K by the end of this year but idk if that's going to happen lol.

  • @johnlong5899
    @johnlong5899 Před měsícem +1

    Amazing that the ICON 1/2 drive is good on the high end but lackluster on the low end. Just the opposite of the 3/8 drive fixed head you reported. LOL. The deal breaker for me was the flex head on the ICON as I use it for brake and suspension work. Your test results are satisfying to me because it sees mostly the mid to high settings. Adding the new 5-70 ICON 3/8 drive flex head to my collection for things like spark plugs and caliper bolts may not be a bad idea.

    • @Tools-Tested
      @Tools-Tested  Před měsícem

      Yep its good to have both, the 1/2 performed like I would have expected.

  • @three-phase562
    @three-phase562 Před 2 lety +4

    Lots of great data, I still like the look of that Lexivon wrench. Thanks for doing all this testing.

    • @Tools-Tested
      @Tools-Tested  Před 2 lety +3

      Yeah I agree, like how easy it is to read and the adjustment seemed faster.
      No Problem!

  • @nicksrandomviews1296
    @nicksrandomviews1296 Před 2 lety +2

    Good video man I appreciate the work you put in to help us make an informed decision 👍

  • @Skelotonkid20025
    @Skelotonkid20025 Před 2 lety +1

    Thanks for the review! Might have to pick up the craftsman or the husky one soon!

  • @alfredbernal8603
    @alfredbernal8603 Před 2 lety +1

    Thank you for your time and video!

  • @tonylinardi3089
    @tonylinardi3089 Před 8 měsíci +2

    What does a lot of play mean in the ratchet head? I just purchased a Mastercraft Maximum 3/8 drive and I noticed it has considerable side to side play in the ratchet head. Should I be concerned? Great video by the way! Thanks.

    • @Tools-Tested
      @Tools-Tested  Před 8 měsíci +1

      I wouldn’t be concerned with, it’s more of a personal irritation. Thanks!

  • @brent2989
    @brent2989 Před 2 lety +2

    Husky doing work!

  • @chrispearce9224
    @chrispearce9224 Před 2 lety +1

    Just amazing. Great work sir.

  • @georgef1176
    @georgef1176 Před rokem +2

    I wish you tested the Tekton clicker. I have my eye on the triple set.
    I’m not big on HF tools but I did get the Quinn digital angle t-wrench. It’s not to bad. Thanks for your tests they definitely are helping us.

    • @Tools-Tested
      @Tools-Tested  Před rokem

      I will be doing the Tekton, but it probably won’t be until next month.
      No problem!

    • @ReiverX86
      @ReiverX86 Před 11 měsíci

      The outside of the Lexivon looks identical to my Tekton, other than the color. I'm wondering how much, if any difference there is internally.

  • @gts5930
    @gts5930 Před 2 lety +2

    Great video! Nice to see they all passed but the Sata is definitely a deal breaker - too short, we're not always torqueing easy accessed bolts. Thanks for the work you do!

    • @Tools-Tested
      @Tools-Tested  Před 2 lety +2

      Thanks! , yep I hate a short handled torque wrench's.

  • @allnovieveryday
    @allnovieveryday Před měsícem +1

    Craftsman is tempting at $60 but lifetime warranty on a Husky for $90 just seems like a better bargain. Is the higher tooth count on the Craftsman actually noticable when working?

    • @Tools-Tested
      @Tools-Tested  Před měsícem +1

      Yeah both are really good torque wrenches, the higher tooth count can help if your working in a tight area.

  • @NathanFromme
    @NathanFromme Před rokem +1

    I’ve had 3 of the craftsmen they all break In the ratcheting mechanism and I only use it for wheels.

  • @MrKiyo15
    @MrKiyo15 Před 2 lety +1

    Awesome video!

  • @Spike_-rx7bx
    @Spike_-rx7bx Před 2 lety +6

    I work in a dealership, I used tekton 1/2split beam
    I've used the craftman and the husky...
    The craftman feels amazing but unsure the life expansion(aka unsure how it will stand up as daily use)
    Husky is right behind the craftman(if not the same) I've taken apart the husky to regresse and noticed after 1yr use(plus or minus) some teeth on the ratchet(not pummel) has some damage and hasn't skipped yet
    Tekton handle gives you a 1in surface area to torque(which starting to hurt my hand after 3weeks of use daily(I wrapped gauze around the handle to add cushion)
    My 2 cents

    • @Tools-Tested
      @Tools-Tested  Před 2 lety +2

      Yeah I can agree with you on the Tekton, after testing that split beam for 1000 cycles my had was hurting!
      Sounds like the Husky did well for everyday use.

  • @vancedyer755
    @vancedyer755 Před 5 dny +1

    Hi, Thanks for the information. I just purchased a 3/8" Kobalt and 1/2" Icon Torque wrenches. They replace 2 Craftsman wrenches.
    I have a question for you. Is it a good practice to exercise a torque wrench before you use it? The directions in my ICON say to exercise the wrench 3 times. The Kobalt does not state this. Did you exercise the ICON or any other wrench before you tested it?
    Anyway, thanks for you informative video.

    • @Tools-Tested
      @Tools-Tested  Před 4 dny +1

      Yes you should always exercise a micrometer style torque.
      I always do before testing the wrenches.

    • @vancedyer755
      @vancedyer755 Před 4 dny +1

      @@Tools-Tested
      Thank you

    • @vancedyer755
      @vancedyer755 Před 13 hodinami

      @@Tools-Tested
      Oh, BTW. I read the owners sheet that came with the ICON a bit more carefully to find that the Icon must be calibrated every 6 months or it will no longer be under the life time warranty. So, basically I have a 6 month warranty instead of a life time warranty.
      That was disappointing to find out.

  • @pennywise8182
    @pennywise8182 Před 2 lety +4

    That Husky is very good.Plus the lifetime warranty no questions asked policy is like how Craftsman used to be......I score one for the Husky.

    • @Tools-Tested
      @Tools-Tested  Před 2 lety

      Nice! Yeah the old Craftsman used to be my go to, you couldn't beat the warranty.

    • @Ladysman_217
      @Ladysman_217 Před rokem +1

      I agree, it's hard to argue with the husky lifetime warranty. Nothing else in its price range offers more than 1 year. I will buying the husky.

    • @rubenhernandez3189
      @rubenhernandez3189 Před rokem

      ​@urrdone1978 Harbor Freight sells a Quinn TW at 80 bucks with a lifetime warranty as well FYI

    • @matthoffman6962
      @matthoffman6962 Před rokem

      You should check that warranty. While it says lifetime on the packaging it may only be 1 year on the instruction manual. With that said you could fight it and say it says lifetime on the package and they’ll likely honour it

    • @pwhittyp5365
      @pwhittyp5365 Před 11 měsíci

      ​@@Ladysman_217kobalt

  • @user-qh2xk5np6i
    @user-qh2xk5np6i Před 10 měsíci

    I have been looking for a mid range Torque Wrench. I was hoping to see a review on the Harbor Freight mid range Quinn click wrench. The only thing I don't like about the Craftsman is it only has a 90 day warranty. I bought a Craftsman about a year before Sears closed. It only lasted 2 years and the click stopped working and the rachet gear broke. I spent nearly $100 for a wrench that only lasted 2 years.

  • @JacksonGuitarsPlayer03
    @JacksonGuitarsPlayer03 Před rokem +1

    Craftsman is fantastic for the home mechanic use heavy duty reliable name brand shit for everyday usage always! I put good trust in craftsman I love the torque wrench I bought their 3/8s one for engine work. I use them on my vehicles several I own. Cars to big trucks. I have many tools over the years I try not to get em too dirty and I try and be good to them especially anything expensive. Torque wrenches should stay in good shape because all you take em out for is to get a bolt torqued to spec or a couple. Then you clean it off if dirty and put it back to sleep in the case.

    • @Tools-Tested
      @Tools-Tested  Před rokem +1

      Yeah I have been using the older USA version for years and was a little skeptical on the new ones.
      But turns out I was wrong and they are great torque wrenches.

    • @karwinchau4684
      @karwinchau4684 Před rokem

      I was looking to buy craftsman since craftsman is quite well known one of the great branded tools. But if we are talking about torque wrenches I woudnt know also trying to get one that is around my budget level. This comments helps a lot thanks!

  • @dainsmart6237
    @dainsmart6237 Před rokem +1

    The lexivon has a limited lifetime warranty I've bought quite few little bits FROM them (speed extension for lug nuts, gas soldering gun it even makes ya nuts glow red for easy removal, socket adaptor for your hand drill, pinned flexible joint 1/4-3/8-1/2 good for the price and a set of flip sockets and extension )I just don't understand what a limited lifetime warranty is is it a lifetime other tool with that person who bought it or is it expected 2 or 3 years and that's it ❓

    • @Tools-Tested
      @Tools-Tested  Před rokem

      Normally its only with the person that bought it, and it could be prorated depending on years of use so they might not completely cover the cost of the repair like shipping etc.

  • @MadAtMax.300Blackout
    @MadAtMax.300Blackout Před 4 měsíci +1

    Hart ratchets im so far going to say dont try as a budget options.
    Their 1/4 came stripped out of the box and the 1/2 anvil has play like what you had shown with the Sato, prlly worse.
    Their sockets seem fine for budget crap.

    • @Tools-Tested
      @Tools-Tested  Před 4 měsíci +1

      Interesting thanks for the info!

    • @MadAtMax.300Blackout
      @MadAtMax.300Blackout Před 4 měsíci +1

      @@Tools-Tested palm sander amd grinder are great for their proce though.
      Thanks for the info ya provide!

    • @Tools-Tested
      @Tools-Tested  Před 4 měsíci

      @@MadAtMax.300Blackout no problem! Hope to test the grinder soon!

  • @nopriors
    @nopriors Před 16 dny

    What do you do if you need the 20 ft lb range?

  • @philkism
    @philkism Před rokem +1

    The husky is only $65 CAD at my local home Depot. Are they running them out of stock/not making them anymore? Definitely grabbing a 1/2 and 3/8 after watching this

    • @Tools-Tested
      @Tools-Tested  Před rokem

      Not to my knowledge, they run a good deal on them now and then.

  • @boosted2.4_sky
    @boosted2.4_sky Před 2 lety +1

    The only click style that I have is a Dewalt that is buttery-smooth... the thing is really good...
    other than that I have digital torque wrenches...
    I used to have the Pittsburgh click style torque wrenches from Harbor Freight Those are actually really good for the money...gave em to my brother who still uses them...
    The Craftsman is pretty much like the DeWalt the fit-and-finish on the DeWalt is nicer also comes in a kit with 5 lug sockets an extension and a breaker bar and a pen style flashlight for about a hundred bucks really nice set... to have around for changing tires

    • @Tools-Tested
      @Tools-Tested  Před 2 lety

      Dang that’s one I missed!
      Yeah you can’t beat the Pittsburgh for the price! Hoping to start testing 3/8 next month.

  • @davidcurnutt9584
    @davidcurnutt9584 Před 2 lety

    I would have really loved to have seen Tekton included in this testing. I understand it’s a lot of options and money.

    • @Tools-Tested
      @Tools-Tested  Před 2 lety +1

      I did test the 150 ft-lbs version and it did not test well. I also tested there spit beam version twice because the first set did not pass.

  • @ryankenealy4837
    @ryankenealy4837 Před 8 měsíci +1

    Just started learning how to do basic auto repairs and need a torque wrench for basic maintenance of 3 family cars. I’m just looking for a mid tier, not too cheap, not too expensive quality 1/2 inch torque wrench. Any suggestions? I had a Husky in my hand yesterday at Home Depot but put it down because I wanted to research a bit first?

    • @Tools-Tested
      @Tools-Tested  Před 8 měsíci +2

      Husky and Craftsman both tested well and seem to be good quality. But if you have a Harbor Freight nearby I would recommend the Icon split beam.

    • @ryankenealy4837
      @ryankenealy4837 Před 8 měsíci +1

      @@Tools-Tested this is the exact kind of answer I was looking for. Thanks 1 million. Liked and subscribed. Happy holidays!

    • @Tools-Tested
      @Tools-Tested  Před 8 měsíci

      @@ryankenealy4837 No problem, glad I could help! Thanks for the like and sub! Happy Holidays!

  • @GeorgeTsiros
    @GeorgeTsiros Před 10 měsíci

    Only the Sata is sold where I live. None of the other brands are 😢 And the two Sata I see sold, is nothing like what I see here. It's a 40-200 Nm, 1/2", with a... green anodized? grip and a 1-5 Nm 1/4" with the same green anodized grip.

  • @mustangecoboosthpp3869
    @mustangecoboosthpp3869 Před 10 měsíci

    If ever there was a tool not to cheap out on it is a torque wrench. I have heard and know of to many people who bought cheap torque wrenches only for them to snap off bolts. I own 6 torque wrenches, 5 are Snap On and one is a CDI, Snap On owns CDI and CDI makes Snap On torque wrenches.

  • @ronaldjohnson1474
    @ronaldjohnson1474 Před 2 lety +2

    Your scientific approach is awesome, contrasted to "torque test" channel, which uses homemade test equipment and questionable methods.

    • @Tools-Tested
      @Tools-Tested  Před 2 lety

      Thanks! I try to get the most accurate and fair data as possible.

  • @pepeshopping
    @pepeshopping Před 2 lety +4

    If you understand how these are made and how they work, you would know there will not be a big difference among them.
    If you consider the fact that ALL of them will lose calibration over time, the choice is clear:
    Buy the cheapest!

    • @ifyourmarriedyourasimpandacuck
      @ifyourmarriedyourasimpandacuck Před 9 měsíci

      Can't you get them recalibrated tho? So it's not like you have to buy a new torque wrench just because one isn't calibrated

  • @andrewscott8892
    @andrewscott8892 Před 2 lety

    I would love to see how the kobalt and gearwrench compare to a nos Armstrong USA made. Have you seen Proto's new smart torque wrench?

    • @Tools-Tested
      @Tools-Tested  Před 2 lety

      That Armstrong looks very close to the Kobalt. Just looked up the Proto, looks interesting maybe later in the year I will test one.

    • @andrewscott8892
      @andrewscott8892 Před 2 lety

      @@Tools-Tested very similar, im guessing apex makes it for kobalt still. You have to be careful with the Armstrong ones because some are USA made and some were made in china

  • @rudydaberry122
    @rudydaberry122 Před rokem

    I got a precision instrument 3/8” torque wrench and I love it but I need to get a 1/2” torque wrench but those are more expensive so idk if I should just get something cheaper like tekton? Or maybe a torque adapter and a breaker bar?

    • @Tools-Tested
      @Tools-Tested  Před rokem

      Torque adapter would be a option, I would go with a 1/2 Icon split beam
      www.harborfreight.com/12-in-drive-40-250-ft-lb-professional-split-beam-torque-wrench-57923.html?_br_psugg_q=icon+split+beam+torque+wrench

    • @rudydaberry122
      @rudydaberry122 Před rokem

      @@Tools-Tested should I spend more to get a precision instrument 1/2” torque wrench or is the icon one just as good

    • @Tools-Tested
      @Tools-Tested  Před rokem

      Icon seems just as good from my testing czcams.com/video/0raQkp3tkg0/video.html

  • @DiligentDave1966
    @DiligentDave1966 Před rokem +2

    Lexivon seems to be the least expensive one.

  • @DiligentDave1966
    @DiligentDave1966 Před rokem +2

    What is a warm up cycle?

    • @Tools-Tested
      @Tools-Tested  Před rokem +4

      Click style wrenches you are supposed to cycle normally at least 3 times at 50% of max torque before using it to torque a fastener. I tend to call it warm up but you are just exercising the wrench after it has been stilling for a long period of time. It sound like a joke but I have test wrenches before exercising them and they have been out of accuracy vs after the exercising. I probably should do a video on it at some point.

    • @DiligentDave1966
      @DiligentDave1966 Před rokem

      @@Tools-Tested Thanks for your response. I actually found something on the internet that says to run it through its range from low to high and then backwards before you use it and every time it has been stored for awhile.

    • @DiligentDave1966
      @DiligentDave1966 Před rokem

      @@Tools-Tested I found something on the internet that suggests running it through its range as a warm up.

  • @DwayneDevelops
    @DwayneDevelops Před rokem +1

    Where's Tekton my good brother?

    • @Tools-Tested
      @Tools-Tested  Před rokem +2

      In this video
      Best Budget Torque Wrench? 10 Tested, Pittsburgh, EPAuto, Capri, Tekton, Sunex, Lexivon
      czcams.com/video/O-47BM01peA/video.html

  • @AlenMajetic
    @AlenMajetic Před rokem

    This sounds weird that you chose Craft over Icon. Icon has flex head, more teeth for making your job easier at tighter spots, and shorter is great because some places you don't have that space to work with. Not to forget lifetime warranty over 1 year. Is the reason you say Craft because it's just a few inches longer? That's personal preference and a cheater bar can help any wrench be longer. I would also say a printed label in red can help with the numbers on bottom for easy reading. But working with many wrenches for years I never cared, I can figure out the main setting and then the turn dial I can do with my eyes closed, just count in your head.