Serpentine belt replacement Ford Escape 2007 3.0L V6 Tribute Mariner
Vložit
- čas přidán 12. 09. 2024
- Serpentine belt replacement Ford Escape 2007 3.0L V6. Mazda Tribute, Mercury Mariner.
2020 has really shown me I needed to be better prepared for the future, start saving/investing now. Use some of that money U saved by watching DIY videos to plan for the future. Click to get started today.
Etrade - refer.etrade.n...
Get 2 free stocks with:
Webull - act.webull.com...
I hope this help you out. It should help for other years and models such as:
2005, 2006, 2007
Mercury Mariner
Mazda Tribute
Like the Facebook page, find me here. / fixingcarsandstuff
This Channel provides videos for informational purposes only and cannot be held liable for injury, damage, problems that arise when trying to duplicate steps shown in videos.
Outtro music snippet, by: joshwoodward.com/ Good To Go - Josh Woodward
creative commons license.
this is the only video that showed me how to replace and install the belt on my 2005 Escape
Boss man This video maybe be old but just help me a lot thanks
Very helpful - thanks so much for posting this - just had a belt die on me and now I know how to replace it - Thumbs Up!
Pat Savelli Thanks Pat, I am glad to be able to help
Pat Savelli ooolo
Nice video, finally a guy who knows what the hell he is doing and can hold the camera still with out it going all over the fucking place!
the major problem with the belt, for me, was my escape 2005 belt configuration is the same as the 2007 yr. I believe the engine has been changed. Probably was done the same time the entire allwheel drive was replaced...what a trip this alternator replacement has been...
Funny thing is I came here to see if maybe it was the same setup as the 500 and it is pretty damn close if not the same. Was trying to figure out how to move the tensioner but now I know. I was loosening the bottom bolt instead because i didn’t know you could fit a socket wrench into those holes above the belt 🤷🏼😂 oops. Thanks bud
Same lol I have a 2008 Ford Fusion trying to take off the belt to change my alternator I was endlessly trying the bottom 🤣
3/8" ! ! that's all i need to know, thank you Sir !
Made my life easy thanks for the video
your are a life saver dude thank you so much thumbs up
Awesome. Thanks for posting.
Thank u where much for helping
Excelent for the info, hello to Sonora mexico
Thumbs up, thanks much.
What belt are you using all the belts I bought where too short
don't know
Thumbs up. Thanks Bro...
Dude thank you, online diagrams suck.
Thank you.
Nothing like the 2008.
What size belt do I need I got like three different options at the auto shop how do I figure it out is there a model number on the car anywhere looked on Google but I can’t find the right answer
Thanks
how much would you charge to replace that?
al poner la nueva polea no hay que oner la guagua en tiempo? solo sacar y poner?
Is this the same on fusión v6?
I still can't get mine on
do you have a video of u replacing a water pump belt on ford v6 3.0 escape
OK
Put the belt on the water pump and then halfway on the cam pulley and crank the engine one turn and it should pull it on.
Put on bottom pulley zip tie to where it reach..then bump the key over ..bada boom bada bing
Need to know the belt number please
Great views! ... any suggestion for best place (accessory unit pulleys and idler pulleys) to start the re-routing of the new belt after the new tensioner and idler-pulleys are all replaced ?
Given this is time-consuming and difficult for the average home/"shade-tree" mechanic? ... there is NO sense replacing just the belt without replacing all the components that "service" the belt itself?! ... unless you live where there is no salted roads, salt water, or heavy rain.
How about a Ford Freestyle 2005? That's what I have and there is so much crap in the way. I don't have a jack, and I think it's gonna have to go up on a lift. It shouldn't be this fucking hard to change a damn belt.
2011 explorer has just 3 pulleys!
Codigo de la corra ???
20 min job
This is murder. What a crappy design.