FIRST DRIVE IN THE EXPENSIVE MERCEDES GT63s WAS A DISASTER ! PT6
Vložit
- čas přidán 5. 08. 2023
- DO YOU WANT TO WIN MY AUDI S3 FOR ONLY £3.99 !? Hit up www.boostcomps.co.uk and participate in the competition YOU may just be the WINNER !
YES we finally hit the roads with the beastly Mercedes GT63s! Question is how did it go ??
Watch
Part 1: • I BOUGHT AN EXPENSIVE ...
Part 2: • I BOUGHT AN EXPENSIVE ...
Part 3: • I BOUGHT AN EXPENSIVE ...
Part 4: • I BOUGHT AN EXPENSIVE ...
Part 5: • WE FINALLY START UP TH...
You can find me on:
Namz: namz_boost?igsh...
Boost Performance: boostperformanc...
Turn on the bell notifications to be notified soon as I upload ! 🔔
Enjoy guys smash the like button, share and leave me a comment - Auta a dopravní prostředky
I’m proper invested in this cars journey now and it’s great to see the struggles, just shows that this industry isn’t all bells and whistles, rather many long hard frustrating hours. Looking forward to completion, I just live up the road maybe one day I will pop by lol.
Namz Benz tech here …. those are active engine mounts which means there are sensors on each mount make sure the sensor on the mounts are intact and plugged in . From experience those abs sensors are extremely sensitive the minute you touch them the wrong way they go bad … also throttle body connectors are commonly left unplugged check those connectors and make sure everything is plugged in I have a feeling somthing is not plugged in
I think the module is faulty or a wire has been damaged. If you've got someone good with electrics check the modules signals. And I always start with checking grounds and fuses when dealing the electrics before I drive into anything long with electrics
I live in Germany and when you started trying to read that german error code outloud, i started cracking up 😂😂 fair play to you man, you got this Namz💪🏻
🤣🤣🤣
You could translate it m8
Ive had similar issue in past on a 4matic system, it turned out to be the abs ring on the driveshaft. Worth continuing with live data readings on front wheels, if you find one to be lower, just change the ring out. InshaAllah you fix it quick and cheap.
Do you need to code the new battery in ?
Loving this series Namz, keep at it - You will get there 🔥
Loving this build bro and episodes like this just show how hard you have had to work to build your business to get it to where it is today. People watch the good times with you buying all these cars, ramps etc and think its easy. This just shows the level of your knowledge and also the determination you have. Keep it up bro
Who wants to WIN my AUDI S3!? ALL you have you have to do is participate in my competition for £3.99 and it could be yours, hit up www.boostcomps.co.uk
Allah test’s thos who he loves the most. Don’t give up brother trust me.
Thanks I definitely believe in this and always have, we will push through till we achieve success
The Bible has a 3500 year history, the Quran is a bad rip off of the Old Testament. The scripture is not corrupted despite Muslim claims
Yeah allah is giving engine lights😂😂😂 let him also stage 2 the car then hahaha dude...m
Well then you shouldn’t be doing these competitions, this is gambling
@@mhero7345 it’s not necessary god gave the engine light but the struggles behind it nothing happens without gods will
Dude, All the best of luck, & thankyou for sharing what you do.
Salaam Namz Great vid Bro
worked on a few of these with 4Matic unavailable warning
most likely your ABS wheels speed sensors.
Also as you mentioned it was hard to turn please also check live data for steering angle sensor as this can cause error too.
You got this bro 💪
Definitely check the steering angle sensor that can cause those symptoms
Had same issue with esp lights etc got told it can be either module or you clear it on computer and get lucky and don't go away either way with best guy to sort it
It’s nice to know that it’s not just me in life where when things should go smoothly, they don’t. Always some sort of road block along the way. Usually, there’s always a silver lining. I hope.
So true! Absolutely is the case and I can say this from experience it always turns out better
Keep at it bro
Always anticipating the next episode 💯💪
You got this bro, love the channel, top content. I will be following this journey till you get it right 💪🏼
You know them ones where you have to like the video before watching it because you know it’s gonna be a banger!!
On replacing the new battery, I'm sure it needs to go on a Stars machine for reset.
I love watching your videos
Keep up the great work
Take care ❤
Good luck with this Namz.. cant wait for the next one. An by the way your one of the few genuine CZcams' channel's on here. Keep up the good work man. 💥
Please keep us posted and thanks for sharing your journey with this GT. Cant wait to see it when it’s sorted. Maybe Mercedes can shed some light?
good luck Bro. My old AMG gets its steering learning by turning the wheels left to right full lock a couple of times on the road.
Also Mercs can go to limp mode after a battery change especially if no battery for more than 2 days.
Most mercs have an additional battery backup either in the boot or under the dash. it's just a small one to keep you losing all your settings.
Correct Battery voltage on mercs is very important. modules and sensors hate low voltage. keep the battery fully charged.
ALL THE BEST BRO
Great video, it’s nice to see the problems you have work out.
Had a similar issue with my C43 with the 4matic system. The steering wheel angle sensor had gone faulty. Had to remove the steering wheel and replace the angle sensor/clock spring assembly. If you put the car in reverse, you can see the direction the car the thinks the steering wheel is pointed. In my case, when the steering wheel was pointed straight, the guide lines on the reverse camera were showing I had the wheels turned, which was obviously incorrect, and I knew the steering wheel angle sensor was giving incorrect feedback.
Damn was really looking for you having a smooth drive inshaAllah next video you'll be successful inshaAllah...
Great video dude I’m loving it, keep posting please!
Doing awesome brother take you’re time slow motion is better than no motion much love from New Zealand 🇳🇿 ❤
GO Namz!
Mercedes are headache when it comes to diagnosing faults. U normally have to check for software updates. The ABS sensor does look worn but weird to have happened within 4k miles. Keep going though bro you'll succeed. Maybe take it to merc for there diagnostic machine to be plugged in?
Enjoying the vids mate 👍🏼
Similar experience here had this issue one time out of completely nowhere. Brought to get my headlights checked and after leaving service had ESP issue and like 30 other codes, nothing was done only a code erased due to headlight issue, the guys used their diagnostics tools similar to what you have. I have a feeling these cars hate other OBD2 tools. What solved my issue was to factory code/re-program every single module with Xentry dealer tool. Although, I can't remember it could have been Vediamo. That's what I did and all issues went away :) nothing was wrong with the car for me atleast. Just reset everything as if it just rolled off the assembly line. Hope this helps!
Hard graft keep at it love this series
I have been waiting for this video all day 😢can’t wait to see it runner.
Check the crankshaft sensor for the relearn and rough idle common symptoms
And abs pump for the esp
New to your channel
Masha'Allah keep up the good work. Its a learning curve insha'Allah you will get it sorted.
Love you vids. Always looking forward to the next one, and these videos are very educational 💯👌🏼
What Autel scan tool do you use?
"Wha ya mean ih workin wha da bombaclaaart ya talk bout" Looooooooool 🤣🤣
Loooool 🤣🤣🤣
Hey Namz,did you disconnect the steering shaft to pull the engine ? If you did it could be that the steering wheel was turned & the angle sensor is out of wack,had that on a E63 before,I'm sure you'll work it out either way.
Hi nope we took the engine out from the top so we didn’t disturb the steering rack, however I carried out a SAS learn anyway but it didn’t help definitively will figure it out just a matter of time
About time a brother has his own competition channel who actually knows his cars ❤
It's gambling, brother
Great set of videos
Namz you will figure it out . Great video. Bud.
Always bro we will 🙏🏽
Check to see if the wheel hub bearing magnetic ring that the Wheel speed sensor reads from when wheel is spinning is clean!
I had this before on an A Class & limited it to 20mph …
The wheel speed speed sensor would read those manual rotations you were doing but actually driven rotations it won’t be able to read it, you may have to check the whole sensor that connects from the frame to the wheel or it may be some junk that solidified into the wheel hub that’s possibly blocking the sensor from reading the wheel speed. Hope it helps, I had a similar event like yours
Tickets purchased IA wish me luck been following you for a while and must say good job bro inshallah more videos to come by 🎉
Yes love this content of problem solving etc. keep it up.!
Engine was the easy bit all the electrical shit is the pain
all new cars are all about sensors, it could be ABS but it's just a guess the Pulsating brakes normally due to rust on discs but again only guessing best bet contact DiagnoseDan he a CZcamsr I'm sure he will love to help
when is the next part coming up been wating for a while now bro
Hi namz i know some cars need to be up to a certain temperature before it will do the crank relaern also if you put a new battery in might need to do a BMS reset
We had it up to operating temps ie 90 degrees and it still didn’t work
Do the BMS Reset and try crank learn again I need to see this beast moving
Keep going your nearly there
I feel the frustration my friend, it’s all part of the process as you said. Sometimes it happens and all you can do is keep going. You and the guys will get it sorted and looking forward to see what’s next.
You got this bro and i know well see it driving soon
Just goes to show how complicated these cars are and the importance of manufacturers warranty.
Yeah, manufacturers warranty, factory trained technicians with factory software and access to factory level support critical. If this is not available, highly competent, experienced independent required with first rate auto electronic and diagnostician skill set. Shame this car does now not have this and never will again now it has been messed around with by unqualified persons.
@@Dingolfing this car has variable valve timming, what is current timing with camshafts? is it little bit ratling also? if cylinderdecks are too low, it can change the timming also...wiht that case, it will never find right timming...
@@Dingolfing we dont know how many times he has to erase those fault codes...
@@Dingolfing are you Mercedes expert what qualifications do you have keyboard warrior certification
@@darrenpowell7225 well I clearly have more understanding and relevant things to add than you.
Namz how can you stop the stones from hitting the radiator?
I’m confident you’ll get to the bottom of this issue Inshaa’Allah
Good luck Namz
That's a beautiful car bro, hope you get it sorted
I have been waiting for this second part
Been waiting 🎉🎉🎉🎉 sick 👏
We waiting for next video. Uve got this bro
May allah keep blessing u bro upload more
Bro love watching your videos , we know u got this bro and will figure it out and get this beast on road , u got the car running which is the main thing, will be a minor issue , good luck my bro
Keep it up brother
Great show. Respect from the United States. Subscribed ......
I came here to hear some nice revs :D I hope you fix it Namz!!
Bro I can feel pain when thing expensive but hey have faith take it easy and figure it out. I’m sure it’s will be fix the problem soon inshallah. Think positive ❤
Big Namz Boooosttt!
Bro - new to your channel. Absolutely loving the content, it highlights the real frustration that goes into fault finding on these highly complex cars. More importantly, your investment that has gone into it, i feel there will be a happy ending to this journey. Thank you for allowing us to tag along with you.
I bought om parts for my c-class and my car had the same issues .bought a oem part and everything worked fine
Very good video bro loved the jorney so far, youll get the car running properly inshaAllah. Also what model is the Autel scanner you are using
Brilliant content bro keep it up
You will figure it out, I have faith in you Namz.
Hi, thanks for the videos. Have you got access to someone with factory diagnostic software? Some learning and German manufacturer specific learn ins can be problematic and not work on third party scan tools. Seems weird there is something in DME about a rotor learn in which sounds like it is very much to do with the braking system, which is where you are having the issue. Maybe someone at the auction place or elsewhere has introduced this new issue as I cannot see why this would flare up with what you have done. You did not drive it before you did the engine work so this issue could have likely been there when you bought itZ Could someone have swapped out the DSC unit or another part with a faulty one, or DSc unit now needs coding to vehicle.
From sounds of it, abs sensors should be replaced along with abs pump that should remove most christmas lights
I love the content!
Bro you are a good mechanic they are many mechanic in this world who can’t solve the problem that you can solve
Proper invested in this car brother inshallah everything will fall into place ❤
Great video
In sha allah akhi the car will be back and better then ever make it 1000hp and fasster then dmos ill bring alot of eyes 👀 to your garage in sha allah u have a super garage open in no time
I had this problem on a car once and it was in lymph mode because of the esp and and system but I took it out and did a emergency brake test and the car sorted itself out also if not that it could be the sensor like you said
I have faith in you bro, im sure you will fix this beast.
Youl get there bro I need to come down and sort my s3 8l out
That engine start up sounds painful😭
Mentioning because on my merc same light comes up when I put in cruise control we’re u can set the speed u want to lock in 👊🏽
Will either be a damaged abs ring or sensor or the steering angle sensor. Also make sure the throttle position sensor or wiring is good
The trophy will be worth the pain
Stones hit this area frequently so I advise you to install extra netting to save you future expenses
Bro on the dash the cruise control symbol is on maybe try turning it off then drive might be causing it to not go past a certain speed ?
Very good content
Thanks a lot
The Bollywood acting at 17:36 - and then it started working 😂😂 killed me
Bro what's brand of diagnosis machine you are using.
Big up my brother don't give in
Good luck bro
Goodluck bro
Ur a legend 👏 🙌
In sha allah it gets fixed, you got this bro
Yo Namz, Once you sort the Faults, i must ask which is cheaper, new windscreen or repairing that front bar? 🤣💪👌keep up the good work.
Need to see this sorted!
Wish these episodes were an hour long. Keep going brother you will find the issue
14:55 no sir, those projects actually DO NOT seem easy😅
Mashallah brother it's a monster of a car it fits you btw