Hidden Features of Tools You Use Every Day That You Don't Know
Vložit
- čas přidán 13. 12. 2022
- In this video, we showed the hidden features in the gadgets we use every day. Although almost all people use these tools every day, they are unaware of these hidden and very useful features.
tools,cool tools,cool tool,cool,cool tools 2022,hand tools,home tools,amazon tools,10 tools,tools 2022,tools for handy men,woodworking tools,amazon tools 2022,tools that will make your life easier,cool gadgets,cool woodworking tools,cool tools 2021,cool tools 2020,cool tools videos,cool tools to have,new tools,must have woodworking tools,best tools,cool tools on amazon,cheap tools,hidden tool features - Jak na to + styl
Huh, the only one of these I knew was the wire cutter in the side of the pliers. and I never would have dreamed of using a clamp like a jack. Mindblown.
Thank you
Another "hidden" feature of screwdrivers is to use the correct bit for each screw. Pozidrive is not the same as Phillips.
Yes. It's too bad they look so similar. People will continue making that mistake forever
A?
@@madwhitehare3635 PZ и PH. Крестовая с насечками по диагонали и обычная крестовая. Фактически они разные, из-за чего неправильная бита либо слижет шлиц, либо сама слижется
@@erict3728 Forget about similar most people don't even know what a "Japanese industrial standard fastner" is let alone how similar it is to philips.
Not a single new idea. Was hoping for one of those eureka moments. But no.
Сохраню себе, рядом с рецептом по приготовлению кипятка 😂
Я думал я тут один в ах….е!!!Спасибо бро!
Ты расскажи им как сделать кипяток из двух лезвий, двух спичек, ниток и двух кусков проволоки. Нобелевку получишь!))
Кажется, что эволюция показала нам средний палец и устремилась в обратную сторону!Остановите планету я сойду!!!С бульбулятора посмеялся спасибо!
Сначала нужна инструкция по повороту ручки плиты
😂😂😂
I like the elevator for raising the furniture , clever.
Yes. But why would he want his table to wobble?
“Elevator”
Lol
@@Traitorman.14.3 only exemple
Even though I already knew some features but there are still some new to me. Thanks a lot!
Спасибо. Выкинул домкрат и пользуюсь струбциной при замене колес.
🤣
😂
Вот как нужно на всем знакомой херне миллионы просмотров получать. Вот это считаю грамотным лайфхаком👍
не думаю , что выемка на лезвиях , для очистки кабеля , ведь она только не первой секции , которая и будет первой удаляться , когда затупится
я думаю, эта выемка говорит, что лезвие новое.
Я этой выемкой пластик режу, например сендвич панель для откосов.
Brilliant thanks for the tips 👍
1:20 никогда не ломайте на себя! Только от себя, и в сторону стены или пола.
Never break the blade towards yourself, but only outside and facing to the wall or floor.
про снятие изоляции выемкой на лезвии ножа - дичь дикая. выемка означает, что лезвие еще не отламывали.
Тут половина такого же, впрочим как и в большинстве таких "полезных" роликов. Я проржался с "домкрата". Разве что про кусачки на плоскогубцах не обманул.
@@LexxKD надо попробовать машину поднять...итало-дизайн...
There is a chamfer at the end of the blade to prevent it from jamming when it is retracted. the reason why there is a chamfer in the front is because the blades are processed continuously, and the tail of one blade is actually connected to the head of another blade.
That makes a lot of sense, thanks! It is handy for stripping wires in a pinch (no pun intended…) like the video shows, but only when the blade is fresh since other segments lack that. On the other hand, it's a quick visual cue to tell whether the blade has ever been shortened or not!
Actually, turning the wire with the blade puts cuts in the wires & weakens the load capacity making a fire hazard according to the American Electricians Code!
Ямка на лезвии одноразовая. отламываем первый-же сегмент и остаемся без ямки. Тупо.
Остальные "лайф-каки" на уровне результатов моего любопытства в 10-летнем возрасте.
Ты родился гением и сразу всё знал
Si no veía este video grandioso en utilidad, no aprendía esos trucos ,valiosos para el trabajo, muy buena creación de video, gracias gran Reparador.
Bonnes techniques d'utilisations,merci j'ai découvert maintenant quelques astuces grâce à la vidéo. 👍🏻
В первом эпизоде такой скрытый шестигранник, при всём желании не догадаешься приложить туда ключ. И кстати у самореза шлиц PZ а у отвёртки PH, Если взять отвёртку с правильным шлицем, то ключ не понадобится.
А зачем столько наименований? 🤪
Под каждый новый саморез новая отвертка?
@@MT3-82 Зачем отвёртка, подойдут обычные молоток с гвоздодёром.
@@paravedaparaveda.5308 Тебя производители инструментов наепывают, а ты довольный, как слон.
@@MT3-82 Ты о чём, болезный?
The front part of the chipped part is because the blade and the blade are processed continuously, and the back part is for the blade to slide smoothly. Also, it seems that the front chipping is also because you can see at a glance that it is a new blade that has never been broken.
Yeah, that cable thing he showed would only work with a new blade. Not that it was useful to begin with.
It is Almighty Allah who brought down iron from heaven and made it soft enough for us to mold it into the shape we want. Almighty Allah creates things for us through this iron. Praise be to Allah, the Lord of the Worlds!
"We sent Our messengers with clear proofs, and We sent down with them the Book and the balance, that people may be just. WE ALSO SENT DOWN IRON, which has great strength and benefits for people, so that Allah will reveal those who help Him and His messengers without seeing (Him). Verily, Allah is Mighty and Mighty." (Holy Quran, Surah Iron (Hadid), 25)
Gibberish.
Smart trick.. terimakasih sudah menginspirasi videonya
Gerçekten mükemmel yeni taktikler öğrendim teşekkürler
Чувак ты умеешь отвёрткой пользоваться? Ты сделал мой день, я горжусь тобой!!!
Только он открутил PZ саморез PH отвёрткой, собственно поэтому и люфтило. Если бы взял PZ отвёртку, то и вороток не нужен был бы =)
Ага, еще бы разобрался для себя ,чем оличается шлиц Philips от Pozidrive (PH, PZ)
こういう便利機能が付いたツールもありますよという紹介な感じですね
カッターの被膜剥きは、製造の工程であると効率的だったから付いたのであって
利用目的ではないのでは?(刃を折れば無くなるモノですから)
Спасибо, посмеялся от души)))))
ага! Можно было назвать видео "Записки глухонемого" ))
@@user-bm4rq5rq4f или тупого)))
@@taricsof3207 для кого эти дебилы за границей придумывают всякие хитровыдуманные торксы, звёздочки , PH, PZ, если они, цука, простой винт без видео выкрутить не могут?))
А этот указующий перст, у меня от него волосы в жилах стынут
Стыдно над больными смеяться.
Bravo! Thank you. Brilliant and simple!
nice video without annoying music yet informative.
Tribute! for your explanation without spoken texts. The 'pointing finger' is not only clear, but sometimes also witty. In short: a revelation besides all the needless chatter on this medium. Thanks
First dude, use proper bit for proper screw. Then do amazing :P
Flip, all these years using tools and I didn't know this! Cheers, mate, for this video. Glad that I subscribed.
Genial!!!!👏👏, Very interesting.
Прикольно, такие вещи надо изучать на уроках труда. В СССР был такой предмет в школе, как сейчас - не знаю.
ну так знай,что СССР прекратил своё существование более 30 лет назад.
@@user-du4tx8kp3u что это меняет?
Че ты несёшь, в СССР не было таких инструментов, где ты видел канцелярский нож или отвёртку с отверстием иди в музей сходи сынок
@@user-ek5uv1ni6x Зато для людей из Союза это видео ничего нового не открыло. Это всяким путинъюгендовским эйчарам - откровение. А отвёртки мы сами из гнутых гвоздей вытачивали хоть треугольные хоть с фигурным шлицом для авиационных разъёмов.
@@user-xb1wb6px5k ну да, нет инструмента - нет проблем, нечего открывать:)
I already knew around half of these hacks, but it's the half that I didn't know that was so illuminating. A great upload...very useful...thanks for sharing.
я непанемаю
@@alexeydolya8733кинопачку "перевести на русский" нажыми
Keep up the great work, you're inspiring others
เยี่ยมมาก ขอบคุณสำหรับ เทคนิค
Es una maravilla conocer estos secretos , el ingenio humano ,para saber aprovechar esos inventos al Máximo !!! Excelente explicación y quien fuera a imaginar el uso apropiado y correcto !☝️😃🇲🇽saludos de un suscriptor agradecido desde CDMX !
It is Almighty Allah who brought down iron from heaven and made it soft enough for us to mold it into the shape we want. Almighty Allah creates things for us through this iron. Praise be to Allah, the Lord of the Worlds!
"We sent Our messengers with clear proofs, and We sent down with them the Book and the balance, that people may be just. WE ALSO SENT DOWN IRON, which has great strength and benefits for people, so that Allah will reveal those who help Him and His messengers without seeing (Him). Verily, Allah is Mighty and Mighty." (Holy Quran, Surah Iron (Hadid), 25)
Обратной стороной лезвия хорошо оргстекло резать. А то что провод очищать можно сам бы не догадался.
Tolle Tricks !!! Ich hoffe ich kann sie mir alle merken 🙂 DANKE fürs Zeigen .
These are great tricks…thanks for sharing
오~칼날에 선 벗기는 기능이 있다는 것은 첨 알았습니다. 여러가지 방법에 대해서 감탄하고 있습니다.
감사합니다^^
При отламычании следующей секции лезвия этого выреза уже не будет. Бесполезная вещь
Ótima informação 👏 sucesso aí família 🤜🤛
Great tips and tricks. Thank you fro these. If only I had enough brain capacity to remember it all. I am going to look at my screwdriver and knife right now. Wow, and the lift? Amazing! 😮
To my opinion if the cut remain with the blade it is unused and in full length. However, there may be other indications also.
PH2 в PZ2 не надо совать. Возьми отвертку с нужным хвостовиком и откручивай без выкрутасов :)
Используй то что под рукой, и не придумывай другого ! 😁😁😁
📌📌 по путенскому Zомбоящику на росии вовсю рекламируют могилизациию😁. Детали на канале Камикадзедеад 👌
@@remmer4066 Тебе больше не о чем писать? Где здесь о политике? Что касается зомбоящика, то для начала, прекрати смотреть свой, может тогда мозг заработает, и ты перестанешь всякую чушь нести.
@@remmer4066 пошёл вон
@@remmer4066 тупой бот, нет больше этого канала!
Зря старался!
Had no idea about the razor blade snap thing.
I tried on my cheapo $1 razor blade, the back came off and has a slot for breaking off a fresh blade.
Mind blown
That's 1 of 2 things he did right!
Boas dicas 👍💯
Thank you for sharing the hidden features of items that many other people or we have without realizing it.
Jedyne do czego mogę się przyczepić to nie wszystkie śrubowkręty były pod odpowiednie śruby, było widać luzy. Ja stosuje uniwersalny bito trzymacz i dedykowane bity, najczęściej PZ2 i PH3, ale ogólnie poziom zawodowca. Pozdrawiam
Ja w XXI wieku stosuję wkrętarkę, bo po chuj mam się męczyć ze śrubokrętem?
a co powiesz na ostatnia "ukryta funkcje"? nie latwiej uzyc kombinerek do przeciecia drutu😝
@@natural76 - zdecydowanie: wkręty. Pozdrawiam Pana serdecznie.
WD40 zmywa smary ale nie nadaje się do smarowania, także i tu kicha.
Tu w 0:18 do wykręcania wkrętu PZ użyto śrubokręta z końcówką PH, który wyskakuje z wkręta. Błąd!
Не знаю, каким надо быть владельцем инструментов, чтобы этого не знать. Если им работаешь, то все это известно давно.
начинающим. Сарказм неуместен
@Яков , тогда вы признайте, что тоже тупым были когда либо. Мне это нужно, потомучто я техник безопасности, я с этим знанием не родилась. А нельзя использовать инструменты не по их прямому назначению.
Мда... Вспоминается мэм про "раньше в ПТС писали как клапана регулировать.... А сейчас что омывайку пить нельзя..."
@@lenazeynalova3881 Название "скрытые функции" предполагает загадочные тайны инструментов, которые зачем то от человечества скрывают. Ничего подобного нерукожопые парни в этом ролике не увидели.
Интересно однако
0:32 as a kid I always stuck the screw drivers into each other like that and now I know it was supposed to be this way 😂
Unfassbar. Vielen Dank für die Tipps!!!👍
Great hacks! But one hint: Never put WD40 inside a lock! WD40 is good for removing rust and lubrication of big parts. But it is very bad for small mechanics. Only use fine mechanics oil for locks, hinges and door cylinders !
Silicone oil is more than enough, no need to buy special fine mec oil
0:02 if instead of using the wrong size Phillips screwdriver, you used the right size Pozidrive screwdriver on that PZ2 screw, things might go a little bit easier.
It’s a tip for those who doesn’t has or lost the right size screwdriver
@@fajarkurniawan9434 Wrong, that tip has nothing to do with the size or if it is a PZ or PH driver. The tip is for increasing the torque if a screw can't be losen that easy.
Excellent - didn’t know any of them
Excelente. Muy didáctico.
Канал Капитана Очевидность. А от количества лайков становится грустно и стыдно за сограждан...
Походу у автора скоро выйдет видос про то, как без зеркала найти ширинку и расстегнуть её...
Да, канал капитана, ясен хуй.
Это пиндосы
за человечество стыдно!!!
The size of many tape measures is also fixed. Some are exactly 75mm long. You can use it for inner sizes when you can not roll the tape out further. I mean the bottom side where the tape measures can stand on.
There are no standard for the tape measure body length, but the exact length is always printed in the body itself for exactly the purpose you mentioned. So you only need to add the distance you measured with the body length to measure inner dimension.
@@sonicslv6132 that is indeed what i meant. Regards from the Netherlands.
@@sonicslv6132 Not always the case, though.
@@stahlschorsch It actually is. I never see any tape that intended for serious work without the body measurements printed. Maybe for a simple miniature tape that more of toy territory that don't have those measurements. Another tip to know a "proper" tape is you need to look if the hook has a bit of slack, which exactly the width of the hook itself. The slack meant to compensate for the hook width when measuring inside dimensions and thus you also going need to know the body width.
@@sonicslv6132 You'd be surprised how many different "proper" measuring tapes there are out there... all made for "serious measuring work"
With all kinds of features. Or without them.
Good
This is literally one of the best videos I’ve ever seen
Гениально!!! Я уже 5 минут умираю от смеха.😂 Где скрытые возможности?!
В комментариях, причем русских
No, do not strip wires like that! You'll end up damaging the copper cords underneath and that might lead to more trouble down the road!
Completely agree!
The water seals on the pad lock are brilliant, must look for them
Very helpful
Охренеть, советы из серии "вода мокрая, огонь горячий"
Я, сначала, удивился. Чего это он основные функции инструмента на видео запилил. А потом увидел коменты на английском. Всё встало на свои места
😁😁😁
Handy hints we can all use. Great practical lateral thinking
Only the blade hack n the last hack was out of my mind...thanx 4 the tip rest already known...
С пласкашами это просто шедевр!
Это пассатижи комбинированные, а не плоскогубцы (пласкаши). Два разных инструмента.
В любой школе СССР в 6-м классе на уроках труда изучали и работали ручным инструментом.
У нас не было только таких ножей🤣 и отверток
Всё остальное не в новинку. Да и саморезами тиски не прикручивают🤣🤣🤣
Странно, что у народа такой восторг от увиденного.
Tip op 0:03 : gebruik een schroevendraaier die precies past, anders wordt de schroefkop beschadigd.
Advice at 0:03: Use a screwdriver that fits snugly, otherwise the screw head will be damaged.
Also don't use a Phillips screwdriver on a Pozidriv screw, or vice versa. Het juiste materiaal gebruiken is het halve werk.
This is a very useful video, by no means with a wallpaper cutter and a blade on the back to tear off the blade 😁
Okay. That "reverse" clamp blew my mind.
БРАВО !! Коротко но насыщено. Другие всё это на пол часа бы рамазали.
Amazing! Thank you for sharing this
Thank you! Greetings from Miami, South Florida!
Полезное видео. Кое-что не знал.
Super. Nawet nagrane z tą ciszą. 👍👍
Using the back of the tape measure as an eraser messes with its length which make using it at an inner measuring tool as directed would make the measurements wrong. Plus using the saw as a square & knife as a wire stripper would fly in the face of not just their true purposes, but using the 'Right tool for the job', just to mention a few. Why not use a needle nose pliers as a box wrench, a power drill as a hammer & your fingers as a tape measure!!!
Sir, i think we all understand the 'true purpose' of these tools. I also believe that by your comment that you are trying to come across as sharp and witty, but you are actually missing the entire point of the video...
I believe the video is suggesting alternate uses and practical ideas for basic tools in case you happen to be in a bind or in a jam, or if you are simply lacking the 'proper' tools. Shit happens in construction, and guess what?? THIS IS EXACTLY WHAT CZcams IS FOR!!! Good day..
カッターの丸く欠けた部分は何だろうって思っていましたが、使い方が分かってすっきりしました。
ありがとうございました。隠れた機能が付いている道具は大好きです😊😊
でも、使い始めにしか使えない
A cutter knife is used to cut acrylic sheets by scraping and breaking the acrylic sheets.
Последний лайфхак вообще полная неожиданность! 🤔
А разве так можно было??? 😂😂😂
Да там абсолютно всё для полных даунов которые инструмента в руках не держали.
Да этот человек гений. Жалко что не показал как дышать, как смотреть, как слышать, очень жаль. . А то я не умею.
minuto 3,05 mil gracias no sabia ese truco y mira que estaba buscando algo que me ayudara a aguantar una pieza aqui.
ГЕНИАЛЬНО!!!! "никогда" бы не додумался!
Я аж вспотел от удивления 😅
Пресс подкачал небось
Aunque algunas cosas ya las sabía, he descubierto utilidades nuevas. Gracias.
Nice video, thanks :)
Это пособие для тех, кто вчера родился? Особенно забавно про отвёртку и нож, придётся не отламывать лезвия на ноже, а то потом провод не зачищу
а как тебе отвертка с гаечным ключем?)))))
Nice hacks but one important thing for the part with the lock and WD40. You never use WD40 for lubrication. WD40 removes water and rust. And also every type of lubrication and grease. After using WD40 you need some oil or grease to lube mechanical parts correctly (like some sort of silicone oil or ptfe spray)
In WD40 are additives that lubricate a little. You can try it by spraying WD40 on a smooth surface and letting it dry for a few days. Then a greasy film is present. And yes, WD40 is primarily petroleum, which washes out grease and oil.
You should never even think about spraying WD40 in a lock. You destroy the lock with it because the springs and tumblers become resinous. Graphite always belongs in a lock, nothing else!!!! Every manufacturer of locks is happy about these videos because they increase the company's profit exorbitantly.
I work at a stone quarry and I have told and told them no oil in the padlocks use a spray graphite but no I'm a old man that doesn't know anything😵. We have a can of spray graphite and I'm the only one that uses it. Any thing that has oil on or in it gets stone dust caked in it.
I used wd40 on my motorcycle chain when I first started riding. One chain snappage later I now use dedicated chain lube. Wd40 is only good for cleaning a chain prior to lubrication.
J'ai appris plusieurs choses / Merci 👍
Thank you and be blessed
Najpierw to trzeba mieć takie narzędzia :)
Ну кроме того, что первые три "лайфхака" это верный способ срезать шлицы, остальное норм, но общеизвестно.
CLAMP as a Jack!!! @2:51 Wow!! That Blew my mind! My fav. Thanks for posting this video. 🥇🔥💯❤💡
excellent
Utiliser un tournevis pour dévisser et un cutter pour couper ... Pourquoi n'y ai je pas pensé plus tôt ? Tu es un génie..
il a voulu démontrer plus que le simple fait d’une utilisation de base de ses outils, mais à plutôt voulu montrer une utilisation astucieuse et réfléchie de l’utilisation de ses outils.
Really I know some of them but this video was awesome and thanks 🙏 for new information ℹ️ 👍
I feel enlighted now! Thanks!
Спасибо, интересно!👍👍
Стесняюсь спросить. А в каком месте скрыты эти функции то?
Это же иностранцы для них это целое откровение. А вот лезвие на ноже я ломал пассатижами
@@user-ng6vy3tn4b Я знаю про прорезь, но через пару раз она раздалбливается и нож теряет вид, поэтому я тоже ломаю пассатижами.
В следующих сериях !
@@stanevichsa а если нет пассадиж под рукой, засовываешь в любую трещину/щель и отламываешь)
@@pwChek Если нет пассатиж, эти лезвия легко ломаются просто руками (пальцами)… но конечно есть вероятность пореза.
Для тех, кто в танке - если вы не знали о подобных функциях инструментов ранее, убедительная просьба положить любой инструмент на место и не подвергать риску себя и своих близких.
😁👍
Ottimo video. Tra tante cretinate che girano su internet, finalmente un video utile e ben fatto. Grazie
Бл...!!! Гаечный ключ накинуть на шестигранник!!!! Бл....!!! Как же я раньше не догадался! Аж глаза на лоб полезли, вот это открытие!!!
Молодец парень - без лишних слов, без лишних движений! Всё понятно! Спасибо!
Показал бы ещё что ложкой можно кушать
+Щербина Андрей
Ух тии... а я и не знал, думал, что она нужна яйца бить 😁
не накидывай ему идей ))))
А что ложкой можно кушать ?