Just changed one on an 2003 by removing the skid plate. After that, remove the belt tensioner. Rotate the fan shroud extension by removing the 10mm bolt on the driver side, then rotating it clockwise until there is room to lower the compressor out the bottom. Easier than removing the clutch fan, shroud, upper radiator hose and draining anti-freeze.
Great video and detail! One of the only on the H3 as far as I can see. My spec sheet shows me needing 1.5 pounds of freon. Iam replacing several components: compressor, dryer, condenser, expansion valve. Everything is taken apart and flushed and now waiting on UPS:)
NICE VIDEO , THERE NOT TO MANY VIDEOS ABOUT HUMMER H3 MAN, FOR REAL I BEEN HAVING SEVERAL ISSUES WITH MY HUMMERS AND BEEN SO HARD TO GET HELP IN YOU TUBE! 😪😪
Appreciate the video. My H3 had a blowout somewhere.... Compressor is still good (I’m PRETTY sure). I don’t have the time for this!!! Thanks for the tutorial. I might just send it to the shop anyway.
I had my AC Compressor replaced by a shop. They also replaced the Expansion Valve and Drier, which cam as part of the Compressor Kit. However, after the installation, when I turn the AC on there is a rattling sound coming from the engine area. When I turn the AC off, the noise goes away completely! Any idea what could be causing this? It was not like that before... After driving it for a bit the noise kind of went away, but then it came back...
No need to do so much. Drop the sway bar on driver side and remove the transmission line. It’ll come off from the front of the engine. That’s how I did it. Didn’t have to drain the coolant,remove the radiator or fan.
Please tell me this is what is wrong with my 2900 H3T? It has been surging for 3 years now and nobody can figure out why. I spent $2000 on trying to fix a problem and it has not fixed it's not fixed it, but it only does it when the temperature gets above 70ﾟ outside, it never does it in the Winter time, please somebody is somebody help me out.
Just changed one on an 2003 by removing the skid plate. After that, remove the belt tensioner. Rotate the fan shroud extension by removing the 10mm bolt on the driver side, then rotating it clockwise until there is room to lower the compressor out the bottom. Easier than removing the clutch fan, shroud, upper radiator hose and draining anti-freeze.
How long did this take?
@@melanienichols-raffensperg6933 5 years ago, I barely can remember yesterday. LOL
Great video and detail! One of the only on the H3 as far as I can see. My spec sheet shows me needing 1.5 pounds of freon. Iam replacing several components: compressor, dryer, condenser, expansion valve. Everything is taken apart and flushed and now waiting on UPS:)
Great job.
No nonsense.👍
NICE VIDEO , THERE NOT TO MANY VIDEOS ABOUT HUMMER H3 MAN, FOR REAL I BEEN HAVING SEVERAL ISSUES WITH MY HUMMERS AND BEEN SO HARD TO GET HELP IN YOU TUBE! 😪😪
His Janet, hummer 4x4 offroad has good videos and chats about these trucks.
Appreciate the video. My H3 had a blowout somewhere.... Compressor is still good (I’m PRETTY sure). I don’t have the time for this!!! Thanks for the tutorial. I might just send it to the shop anyway.
Thanks for sharing. Seems quite painful !!
Nice work
Cool video 👍👍👍
I need to do the same on mine now.
THANK YOU SO MUCH'
Thats what she said, says the videografer
easy work
I had my AC Compressor replaced by a shop. They also replaced the Expansion Valve and Drier, which cam as part of the Compressor Kit. However, after the installation, when I turn the AC on there is a rattling sound coming from the engine area. When I turn the AC off, the noise goes away completely! Any idea what could be causing this? It was not like that before...
After driving it for a bit the noise kind of went away, but then it came back...
Replacing my AC compressor again after 5 years.
is the fan bolt reverse thread?
If u are looking at truck left is to get lose and right is to tighten
Cual es el fusible del ac
Hey man nice work do you want to do mine I pay good
No need to do so much.
Drop the sway bar on driver side and remove the transmission line. It’ll come off from the front of the engine. That’s how I did it. Didn’t have to drain the coolant,remove the radiator or fan.
Please tell me this is what is wrong with my 2900 H3T? It has been surging for 3 years now and nobody can figure out why. I spent $2000 on trying to fix a problem and it has not fixed it's not fixed it, but it only does it when the temperature gets above 70ﾟ outside, it never does it in the Winter time, please somebody is somebody help me out.
Heard this on but on another vehicle and it was due to being overcharged/too much freon.
@@ricardoorozco8311 it was the computer the whole time. Smh
Sadly, this service costs $1,100 in San diego 2023.