building a steampunk lamp with reclaimed pressure gauge
Vložit
- čas přidán 12. 09. 2024
- I have been getting really creative with copper fittings. I used some bits from the reclamation yard and some old plumbing parts to make a steampunk lamp.
It was a lot of fun thinking about using pipes to transmit light and power instead of water.
Good Work!
Thank you very much. You were an absolute inspiration :)
Thanks. Coming from you, that is high praise indeed.
Very nice. I use reclaimed fittings and used pipe bought from a plumber probably for a twentieth of what you paid for new . No matter how bad it looks it polishes up great on polishing machine then polishing mop.
maravilha,,,parabéns
Nice piece of work. I work mostly in black pipe but I am anxious to do a copper and brass piece. Thanks for the help in deciding! I have a gauge probably a bit larger than the one you worked in and now I have a good idea for its use. I've subscribed!!!
Hi Jack. I reckon if you are any good at black pipe then you will find working with copper pretty easy. I love them both but I am just more familiar with copper
I love it I wish I can do it but it’s kind a difficult
Hi Cesar. The trick is to plan it all very carefully. Then it is not too hard.
Great work bud! Love the design and surprised that the compression fittings actually look really good. Keep it up!
Thanks IZONFIRE I am really happy with the look and it is looking even better as the tube and fittings start to oxidise a bit. The salvaged items and the pipework are starting to look a bit more coherent.
@@Practicaleyes good to hear. Where did you salvage the gauge from by the way? Just got one off eBay but I don't think it's got 'that' look to be honest.
@@izonfire805 I got the gauge on a short length of pipe with the valve connected to it from a local salvage yard (Beeston Reclamation near Chester). It was in a draw with loads of other bits and pieces and had sat in there for quite a while I think. I have bought a few bits from eBay but a lot of the sellers there seem to want to clean things up whereas I want it as narly and original as possible.
Very nice construct. This must have taken a lot of planning though you made it look very easy. May I ask how long it took you to complete?
Hi Don. You are spot on. Planning is everything with a build like this. I spent a couple of evenings working out the key positions for things and then mocked up some of the joints just to be sure they would work. I also spent a lot of time at my local plumbers merchants asking them dumb questions about fittings. I have to say, they were absolutely brilliant (MKM Chester and Plumbase Chester).
I took some tips from Banjo Show, such as using a bottle valve to hide all the electrical connections in.
I reckon I spent around 3-4 days planning and buying bits and then a day and a half to put it all together.
I love the way the pipes have oxidised over the couple of years since I built it and will definitely make another one.
@@MarkAlexanderBuchanan I was hoping to see some more cool creat ns when I clicked your channel link, do imagine my surprise to find that creation was the only one. Talk about starting off on the right foot.
I too have watched a few Banjo Show videos and am drawing inspiration from them. Though my videos are primarily about Scuba diving here in the us, I may do a few about industrial contraptions myself.
Thanks for the prompt reply. I hope to see another upload of yours this winter.
Cheers. DD