Detailed information and links can be found on the corresponding post located here. accautomation.ca/how-ladder-logic-program-scan-works/ Here are the controllers that we have covered at ACC Automation: BRX Do-More Series (Do-More Designer Software + Simulator) accautomation.ca/series/brx-do-more-plc/ Productivity Series accautomation.ca/series/productivity-1000-plc/ accautomation.ca/series/productivity-2000-series-plc-p2000/ Click PLC Series accautomation.ca/series/click-plc/ Omron CP1H Series accautomation.ca/series/omron-plc-cp1h-series/ Horner XL4 PLC Series accautomation.ca/series/horner-xl4-series/ accautomation.ca/series/easyplc-software-suite/ EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package. See below to receive 10% off this software. This PLC learning package includes the following: Easy PLC - PLC Simulation that will allow programming in Ladder, Grafcet, Logic Blocks, or Script. HMI System - Easily create a visual human-machine interface (HMI) Machine Simulator - A virtual 3D world with real-time graphics and physical properties. PLC programs can be tested using EasyPLC or through other interfaces. (Modbus RTU, TCP, etc.) Machine Simulator Lite - Designed to run on Android Devices. Machine Simulator VR - Virtual Reality comes to life so you can test, train or practice your PLC programming. Purchase your copy of this learning package for less than $75 USD for a single computer install or less than $100 USD to allow different computers. Receive 10% off the investment by typing in ACC in the comment section when you order. www.nirtec.com/index.php/purchase-price/ Learn PLC programming the easy way. Invest in yourself today. Regards, Garry ACC Automation accautomation.ca/
Hello ACC. First question comes to mind. How does one save the CTO.ACC, if program mode was to stop and the run again I see the .ACC resetting to zero. How does this rung ladder work if I wanted to initiialize values one time on boot up.
Hi @phillipmaser132, This is a common question. Use the first scan bit (ST0 in the Do-More) on the reset of your counter. When the PLC first powers up this bit will turn on for one scan, resetting the counter. I hope this helps you out. Regards, Garry
Detailed information and links can be found on the corresponding post located here.
accautomation.ca/how-ladder-logic-program-scan-works/
Here are the controllers that we have covered at ACC Automation:
BRX Do-More Series (Do-More Designer Software + Simulator)
accautomation.ca/series/brx-do-more-plc/
Productivity Series
accautomation.ca/series/productivity-1000-plc/
accautomation.ca/series/productivity-2000-series-plc-p2000/
Click PLC Series
accautomation.ca/series/click-plc/
Omron CP1H Series
accautomation.ca/series/omron-plc-cp1h-series/
Horner XL4 PLC Series
accautomation.ca/series/horner-xl4-series/
accautomation.ca/series/easyplc-software-suite/
EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package. See below to receive 10% off this software. This PLC learning package includes the following:
Easy PLC - PLC Simulation that will allow programming in Ladder, Grafcet, Logic Blocks, or Script.
HMI System - Easily create a visual human-machine interface (HMI)
Machine Simulator - A virtual 3D world with real-time graphics and physical properties. PLC programs can be tested using EasyPLC or through other interfaces. (Modbus RTU, TCP, etc.)
Machine Simulator Lite - Designed to run on Android Devices.
Machine Simulator VR - Virtual Reality comes to life so you can test, train or practice your PLC programming.
Purchase your copy of this learning package for less than $75 USD for a single computer install or less than $100 USD to allow different computers.
Receive 10% off the investment by typing in ACC in the comment section when you order. www.nirtec.com/index.php/purchase-price/
Learn PLC programming the easy way. Invest in yourself today.
Regards,
Garry
ACC Automation
accautomation.ca/
Hello ACC. First question comes to mind. How does one save the CTO.ACC, if program mode was to stop and the run again I see the .ACC resetting to zero. How does this rung ladder work if I wanted to initiialize values one time on boot up.
Hi @phillipmaser132,
This is a common question. Use the first scan bit (ST0 in the Do-More) on the reset of your counter. When the PLC first powers up this bit will turn on for one scan, resetting the counter.
I hope this helps you out.
Regards,
Garry
I am not finding CTO.ACC retentive. If i stop the program and start it back up. CTO.ACC is zero after 3 days of counting.
Maybe the CMore can save this value to a;n SD card.