E36 BMW Fuel Injector Rebuild DIY
Vložit
- čas přidán 30. 06. 2024
- Welcome back to the channel everyone! Today we take a look at some easy/inexpensive maintenance that is commonly overlooked. If you enjoy the video hit the like button and subscribe. Make sure to follow my Instagram for more behind the scenes and comment below if you have any questions. Cheers :D
Instagram @prayedfish: / prayedfish
Time Stamps:
0:00 Intro
1:18 Taking Apart
6:11 Injector Rebuild
11:46 Going Back Together/Injector Plug Clips
12:33 Wrap Up and Outro - Auta a dopravní prostředky
Crank sensor update made me laugh, its definitely a vacuum line actuator for evap or secondary air pump. Id remove the cowl and rain gaurd drain to get to the back injectors easier. Also you have a shredder valve on the rail to relieve pressure, not all fuel will come out but majority. I sent mine in to get sound cleaned, and tested along with the kit to bring them back to life. On install use Vaseline to ease install and not pinch rings preventing vacuum leaks. The plastic cover on the end of each injector be careful because they sometimes like to come off, and they'll sit in your manifold blocking spray flow if not sit on your valves. To prime the system, do not just start the car, turn the key to accessory multiple times to get the pump to prime the rail. Good video though.
Good information! The comment is much appreciated.
Nice one my friend big like👍💯
Glad you like it 🙂
@@M-t3ch you' re welcome my friend bless you🤝💯
Yo man, you mentioned that you used the chinese rebuild kit was wondering if it gave you any issues? Looking to buy one and wondering if I could save a few bucks buying the cheaper one
No issues at all. My roommate and I have both put 10k plus miles on them!
I don't think there is any difference between the name brand one and the Chinese one honestly lol.