Thank you very much!!! You saved me a lot of trouble!! I have noticed my power loss, changed filters, still loosing power under load. Long story short, thanks to your video my dealer is picking it up and fixing it under the recall!! Thank you again!!
@@RockyRohde UPDATE: Received my M4D-071 back a few weeks ago. I've put about 15 hours on it bushogging and it now has more power than new! Great video and thanks for sharing once again!
My 2018 M6060 with a only 90 hrs is currently doing the same thing. Runs normal until it gets to operating temp then it can't maintain 540 and will almost stall if I lift loader or while turning while pto engaged. Been looking online and seen its a common issue as you stated with the psb recall out.
I’m having same issue at 300 hours. First thought was starving for fuel and possibly had plugged fuel filter so I changed it the next morning and tractor seemed to be ok for about 45 mins of brush hogging then it lost power again. Found your video and took tractor to dealer. Two weeks at the shop they tell me they can’t recreate the issue which I told them it would need to warm up and be under a load. Their suggestion was a fuel system flush I ask if there was any evidence of contamination…. “No” so I reminded them of the injector issues so I’m waiting on service writer to talk to service manager who is out of the office this week. Long story to ask if you if you notice the power loss only after t warmed up then be ok when first run tractor after it cooled down? Thanks
Thank you very much!!! You saved me a lot of trouble!! I have noticed my power loss, changed filters, still loosing power under load. Long story short, thanks to your video my dealer is picking it up and fixing it under the recall!! Thank you again!!
Glad it helped!
I have a 2019 M4D-071 and have the same issue. I just notified my dealer and filled out a Customer Support Case with Kubota.
Thanks for the info!
Glad it helped
@@RockyRohde here is the PSB for others to share: PSB 2021-007-E-R1
@@RockyRohde UPDATE: Received my M4D-071 back a few weeks ago. I've put about 15 hours on it bushogging and it now has more power than new! Great video and thanks for sharing once again!
My 2018 M6060 with a only 90 hrs is currently doing the same thing. Runs normal until it gets to operating temp then it can't maintain 540 and will almost stall if I lift loader or while turning while pto engaged. Been looking online and seen its a common issue as you stated with the psb recall out.
Thank you... Good info
This was helpful. My tractor has same issue I hope this helps my dealer. Thanks for taking time to make it.
Glad it helped
Beautiful Rig!🇺🇲
Thanks 👍
Thank you! I have the same issue. 2021 with 300 hrs.
I’m having same issue at 300 hours. First thought was starving for fuel and possibly had plugged fuel filter so I changed it the next morning and tractor seemed to be ok for about 45 mins of brush hogging then it lost power again. Found your video and took tractor to dealer. Two weeks at the shop they tell me they can’t recreate the issue which I told them it would need to warm up and be under a load. Their suggestion was a fuel system flush I ask if there was any evidence of contamination…. “No” so I reminded them of the injector issues so I’m waiting on service writer to talk to service manager who is out of the office this week.
Long story to ask if you if you notice the power loss only after t warmed up then be ok when first run tractor after it cooled down? Thanks
It’s injectors.. they can tell when they plug it in..
@@RockyRohdeSounds like your service department knows a bit more than mine. They told me they had to pull them and send off to check them.
Good looking tractor 🚜 🚜
Thanks!