How to Remove and Replace a BMW X3 (G01) Mirror & Mirror Cap

Sdílet
Vložit
  • čas přidán 28. 03. 2021
  • I made this video on how to remove and replace the mirror caps on my 2018+ BMW X3 (G01) to hopefully help others.
    I have done a few small cosmetic mods on my car myself over lockdown, and used youtube to show me how.
    I tried searching online for a specific video or help for an X3 but couldn't find any.....so I made one myself.
    Below is the link to the X3M style Mirror Caps I installed. There are others available, but these are what I ordered. Very reasonably priced and the quality was really good on the ones I received:
    a.aliexpress.com/_mNvsjGj
    Thanks for watching, I hoped this helps you in some small way.
  • Jak na to + styl

Komentáře • 60

  • @tomsawyer480
    @tomsawyer480 Před 2 lety +7

    I just did it accordingly on the facelift model and it’s really that easy. 15 minutes. Nothing broke, the caps fit just as well as the original ones. Thanks for the instructions!

  • @tobydeane2066
    @tobydeane2066 Před 3 lety +2

    Mine all done and fitted quickly. Only a couple mins each side thanks to your very clear and helpful video. Many thanks again and look forward to your futures videos.

    • @neeleshsaladi3800
      @neeleshsaladi3800 Před rokem

      Hi, How is the quality of it now? And did you bought from the link given in caption?

  • @lsjionredlinesupercharged2049
    @lsjionredlinesupercharged2049 Před 3 měsíci +1

    This was a very helpful video and you’re right no need to remove the mirror

  • @samhawkes3263
    @samhawkes3263 Před 2 lety +1

    Great video and just ordered these for my 40d. I think you having a gloss black finish really helps with the extra mods you have fitted. Not sure the front splitter or side skirts would look quite as good on my photonic Blue 🤔👍🏻

  • @joopstam-tk3mz
    @joopstam-tk3mz Před 10 měsíci

    thank you for the video, installed those on x3 2022 LCI and it fit well, as other commented, no need to remove mirror glass

  • @AdslabCanada
    @AdslabCanada Před 2 lety +1

    Than Lyon for the video 🙏🏼 doing them on my x5 tonight 👍🏼

  • @egomez1986
    @egomez1986 Před 27 dny

    Thanks follow your instructions and was able to install them without any issue,

  • @satchemodo6609
    @satchemodo6609 Před 2 lety

    Echo what the others have said, great video and very helpful! Cheers

  • @boybitzprod
    @boybitzprod Před rokem +1

    Great video! Thank you!

  • @amaam3
    @amaam3 Před 11 měsíci

    great and clear instructions

  • @asmasters7132
    @asmasters7132 Před rokem

    Simply great!

  • @kemisani9550
    @kemisani9550 Před rokem

    Thanks mate! 🍻

  • @johnchen997
    @johnchen997 Před 2 lety +1

    Thank you so much.

  • @Capten1001
    @Capten1001 Před 2 lety

    Great video! Any video on the front lip splitter? What is your opinion on getting a one piece front lip vs the ones that come in 4 pcs that have to be screwed on together before mounting on the car? Thanks.

  • @ialaddin
    @ialaddin Před 11 měsíci

    Thank you.

  • @tobydeane2066
    @tobydeane2066 Před 3 lety +2

    Great vid. Keep them coming. Where did you get the trim tools from
    Thanks

    • @ghostrider3547
      @ghostrider3547  Před 3 lety

      Thanks. Hope it helps people. Trim tools were just £10 from Amazon. 👍🏻
      neilsen ct2287 Car Trim Removal and Moulding Set, Red www.amazon.co.uk/dp/B004OEL4LW/ref=cm_sw_r_cp_api_glt_fabc_7JEWEN04T1BGKC8RKR4Z

  • @jordydecaesemaeker4557

    Hello, are the side skirts from maxton ?
    And do they come in front of the side lightning ?
    Thnx

  • @felizh82
    @felizh82 Před rokem

    Hi! Please share where I can buy the trim set to remove the mirror. Thanks

  • @jaylove9987
    @jaylove9987 Před 2 lety

    What kind of screw is holding the motor in? I replaced mine but lost the screw

  • @MrColorsodio
    @MrColorsodio Před rokem

    👏🏻👏🏻👏🏻👏🏻👏🏻 thanks

  • @andrew24911
    @andrew24911 Před 3 lety +1

    What front lip splitter is that? Thanks for the quick video

    • @ghostrider3547
      @ghostrider3547  Před 3 lety

      Hey, the splitter is the below:
      www.ebay.co.uk/itm/BMW-X3-G01-X3M-GLOSS-BLACK-M-PERFORMANCE-FRONT-LIP-SPLITTER-SPOILER-OEM-FIT-17-/164122998008?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
      I had it on my 20d, but have since got an M40i. I put the splitter on my M40i and recorded it, so will put a video up soon hopefully.

  • @Blackwizard18
    @Blackwizard18 Před rokem

    Where did u get the m logo from your mirror?

  • @luisb8942
    @luisb8942 Před 2 lety +1

    Great 👍 video. Do you have the link how may I get the front lip please. Tyvm

    • @ghostrider3547
      @ghostrider3547  Před 2 lety

      Hey, below is the front lip spoiler I have in my car.
      www.ebay.co.uk/itm/164122998008?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_0ndp6bySf2&sssrc=2349624&ssuid=36rQjoJ8RVG&var=&widget_ver=artemis&media=COPY

  • @ialaddin
    @ialaddin Před 11 měsíci

    How did those hold up so far?

  • @ht6501
    @ht6501 Před 2 lety +1

    Thanks for sharing this video. I feel confident enough to do them myself now. With the extra piece of trim at the top of the new caps, do you notice any increase in wind noise?

    • @ghostrider3547
      @ghostrider3547  Před 2 lety +1

      Hey, no not really, maybe a little bit but nothing that I notice. A small sacrifice for a slightly cooler look 😂

    • @ht6501
      @ht6501 Před 2 lety +1

      @@ghostrider3547 I've done them now and I'm very please with the carbon look. I don't notice any wind noise difference at all. Thanks again.

    • @neeleshsaladi3800
      @neeleshsaladi3800 Před 2 lety +1

      Hi, Did you ordered from the Aliexpress?? Is it a trustable site? Please let me know

  • @bobslap9017
    @bobslap9017 Před 2 lety +1

    Nice vid. Which badge do you have on the grill? Cheers

    • @ghostrider3547
      @ghostrider3547  Před 2 lety +1

      It is a gloss black “M” side fender badge. 👍🏻

    • @samhawkes3263
      @samhawkes3263 Před 2 lety

      @@ghostrider3547 after watching your video I bought and fitted the wing mirrors. Looks brilliant and your instructions were superb 👍🏻. I’ve found the M double slated front grille online for £59 and I’ll look for the side fender M badge but how did you fit it? Any links appreciated 👍🏻

    • @Levelsoftalk
      @Levelsoftalk Před 2 lety

      @@ghostrider3547 how did you attach that to the grill!? I have the same black badge lying around

  • @samhawkes3263
    @samhawkes3263 Před 2 lety +2

    Did you have to replace your front Kidney Grille to get the M logo? Trying to find this online 👍🏻

    • @ghostrider3547
      @ghostrider3547  Před 2 lety +2

      The badge didn’t come in my double slat grille so I ordered a cheap x3m grille badge from Ali express that fit on my grilles (so that I had the fixing for the grille badge. I then removed the cheap looking x3m badge (as looked cheap and mine isn’t an X3M), ordered a gloss black “m” fender badge from eBay and stuck that on the grille badge fixing. 😀. Subtle but looks quite good in my opinion haha.

    • @samhawkes3263
      @samhawkes3263 Před 2 lety +2

      @@ghostrider3547 superb mate, it looks really good and I can see you’ve done some investigating to find a good solution. I’ve the standard gloss black grille but realise from looking I’d need that double slate type before doing the same. I’ve ordered the wing mirrors so that’s one job done and then I’ll sort the grilles 😉👍🏻

    • @ghostrider3547
      @ghostrider3547  Před 2 lety +1

      These are the grilles I put in mine if it helps. Had them for a long time and they have been great quality:
      www.ebay.co.uk/itm/GRILLE-FOR-BMW-X3-X4-G01-G02-SPORT-KIDNEY-DOUBLE-SLAT-M-LOOK-GLOSS-BLACK-/274005168304?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0

    • @naumanrahim
      @naumanrahim Před 2 lety

      Whats your car color?

    • @ghostrider3547
      @ghostrider3547  Před 2 lety

      Black Sapphire

  • @enriquevazquez3059
    @enriquevazquez3059 Před rokem +1

    It be compatible with 2022 x3?

  • @retbul001
    @retbul001 Před 4 dny

    Good job

  • @neeleshsaladi3800
    @neeleshsaladi3800 Před rokem

    Hello, How is the quality of it now? Do they came off any time? Or everything is good?

    • @ghostrider3547
      @ghostrider3547  Před rokem

      Quality of them are just the same as when I installed them. No colour change or warping etc 👍🏻

  • @daviddaniels9352
    @daviddaniels9352 Před rokem

    When driving at high-speed do the mirrors make a whistling sound?...

    • @ghostrider3547
      @ghostrider3547  Před rokem

      Yeah a little bit, but only noticeable if the window is open. It is the same on the genuine X3M mirrors also. 👍🏻

  • @darrenturner4352
    @darrenturner4352 Před 2 lety +1

    Where did you get the front spoiler from

    • @ghostrider3547
      @ghostrider3547  Před 2 lety

      www.ebay.co.uk/itm/164122998008?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_0ndp6bySf2&sssrc=2349624&ssuid=36rQjoJ8RVG&var=&widget_ver=artemis&media=COPY

  • @justinknight7177
    @justinknight7177 Před 3 lety

    will this mirror fit my 2014 X3 28i?

    • @ghostrider3547
      @ghostrider3547  Před 3 lety

      Hey, I don’t think the ones I have would as these fit the G series X3.
      The 2014 X3 is known as an F25 model, so you would need something like the below link:
      a.aliexpress.com/_mtCij85

  • @tyleralcala6429
    @tyleralcala6429 Před rokem +1

    Tried this and shattered my mirror. It’s not necessary to remove. Did the other side just prying off the cap and it worked perfectly. I recommend not doing this!

  • @christophechazeau8875
    @christophechazeau8875 Před rokem +1

    No need to remove the mirror

    • @nissy4
      @nissy4 Před 11 měsíci

      How did you do it?

  • @arfabarmcake2776
    @arfabarmcake2776 Před rokem

    Good vid but the background music is horrendous and annoying