Really it is a more than wonderful and very practical program But I have a problem that the GPS module of my 6mv2 does not work in closed places. What is the problem? Is it a problem with my module or is it a general problem with this model?
If I forget to connect the 2 resistance it will effect on the system? In another words the system will operate properly or no? Please can you answer my question 🙏
and i know i am interfering with you My question is simply the lm2569 used by Kapoor and connected with it a rechargeable battery so that the fuel fuels it with the tire and in case of the interruption of feeding the battery enters is this useful Or I will connect a diode between the model and the battery so that it doesn't happen coming back from the battery
hi bro you used "sendGpsToServer();" in loop section but not define this method in code im getting error "was not declared in this scope" can you help me?
Bro i built gps and gsm vehicle tracking system, when I finished all , the problems is final test, I mean when I send a text to gsm , the gsm will not give me the location and by the way everything is correct ( the code , physical connection) and also I have done complaining and uploading well so pls bro help me and answers to me soon please
Sir, can you provide the link or details of the ignition sensor (I mean number of wires in ignition sensor & the name of the sensor), because i didn't find this ignition sensor anywhere.
@@JustDoElectronics in the circuit diagram (on the website) there are 3 wires of ignition sensor but there is ahowing only two wires connection. A one wire is hided under the other
I want to skip the message sending part. Where as i want to build a webpage. If anyone hit on web url he or she will able to see the location. Is it possible?
Thanks for the project. There is an alert when using resistors on input A0 when calculating the value of the voltage entering the Arduino 8 volts. This is a danger. The input must be 9 volts on the 1M resistance, not 100K???
Sir aapake code ke saath prograam banaata hoon, lekin ek samasya hai, jab main ignishan sensar ke saath lain karata hoon, to mobail par ek sandesh aata hai, lekin jab main sandesh bhejata hoon, to koee uttar nahin aata hai aur yah kaam nahin karata hai
Can We send those details of coordination to native server instead of phone number,and create a registration form and collect data of the people and send the coordination to the person who have registered to the native server.
@@JustDoElectronics thank you, it works perfectly, just one thing, I see on the serial monitor a countdown for the messages received, after 70 messages is it that the gsm module no longer accepts the messages? if it's true how send this.
Hi Sir I have done all step by step. tested Sim800l & NEO-6M all working perfect. But when I load your Code do all the pins as per Code I do get on the serial after sms bike on I get AT OK ATE1 OK AT+CPIN? +CPIN: READY OK AT+CMGF=1 OK AT+CNMI=2,2,0,0,0 OK +CMT: "+27 Follow MobileNumber" , " " , " , "23/08/31, 17:41: 50+08 " bike on And that is that nothing else happens. Please can u assist 🙏🙏🙏
Problem statement:- when an object enters into the geo fence, the buzzer and led will turn ON until object is in geo fence. Please can u help with this Code and hardware idea
Thank you very much for share code ang schematic too.
You are welcome
Great upload video! 👍 stay connected! 😍Like 👍👍👍
Thank you! Cheers!
Really it is a more than wonderful and very practical program But I have a problem that the GPS module of my 6mv2 does not work in closed places. What is the problem? Is it a problem with my module or is it a general problem with this model?
used another gps module
@@JustDoElectronics no the same module
@@ahmedtaher4015 same problem bro can you found any answer?
Nice Projects 👍👍👍
3 Phesh motor mobile controlle, GSM sim800l module Projects Banaia, College & SMS Opriting. Bro hindi me aap boliy a.
ok
Can you help me with the project pls reply me if yes
Nice. Please upload the code and circuit diagram
Check description
Good information 👍
Thanks
If I forget to connect the 2 resistance it will effect on the system?
In another words the system will operate properly or no?
Please can you answer my question 🙏
this was the correct video I have been looking for 2 years , thanks so much bro
You're very welcome!
Hi
@@JustDoElectronicsis it possible to use nano ?
Bro can help me connect these for my final year project
I am so confused and I connected as per circuit diagram but it's not working
so i need to put a sim to the module SIM800L to make it work, right?
what is connected to the neo 6m with black wire?
Power supply?
Please sir, I want to know if I can use the A9G GPS module to control a car's ignition without Arduino ?
I need help please
Yes is possible
ser can you make a project where you can track something and reflect it on website using google maps and storing it on firebase
Can you send a Circuit diagram for this project.
and i know i am interfering with you
My question is simply the lm2569 used by Kapoor and connected with it a rechargeable battery so that the fuel fuels it with the tire and in case of the interruption of feeding the battery enters is this useful
Or I will connect a diode between the model and the battery so that it doesn't happen coming back from the battery
Hi. How to join power supply to sim 800L ?
Hi
This project is very good
Please insert the code
Thanks
www.prateeks.in/2021/12/gsm-gps-based-vehicle-location-tracking.html
@@JustDoElectronics Thank you 🌺
@@saeedbahramyan8876 Welcome
Hi, thank you for the sharing the code. Is it possible to you an esp8266 or esp32?
Yes
@@JustDoElectronics Can l ask for assistance using esp8266 as a substitute for Arduino
hi bro you used "sendGpsToServer();" in loop section but not define this method in code im getting error "was not declared in this scope" can you help me?
Yes plz send me photos in mail id
Sir please help me to build this project
Called
Design and implementation of a stolen vehicle tracking system
based on GPS.
Nice sir ❤️
Thanks ✌️
Hello, can you make a video explaining how to connect these components on the Bread Board? Very important to me. thank you very much
.
👌👌
I want to make it without ignition do you have such videos
Bro i built gps and gsm vehicle tracking system, when I finished all , the problems is final test, I mean when I send a text to gsm , the gsm will not give me the location and by the way everything is correct ( the code , physical connection) and also I have done complaining and uploading well so pls bro help me and answers to me soon please
Sir, can you provide the link or details of the ignition sensor (I mean number of wires in ignition sensor & the name of the sensor), because i didn't find this ignition sensor anywhere.
Chek website proper
@@JustDoElectronics in the circuit diagram (on the website) there are 3 wires of ignition sensor but there is ahowing only two wires connection. A one wire is hided under the other
@@JustDoElectronics and also in the video you had rapped a tap on it so that the connection of all the 3 wires of ignition sensor is not visible.
Bro please send me code and circuit diagram
Email me
Bro which sim card will be good with this module
Airtel vi jio?
Airtel
@@JustDoElectronics Thanks for your early response
How about jio?
Which sim u are using in sim800l
Airtel or VI
@@JustDoElectronics tq
I want to skip the message sending part. Where as i want to build a webpage. If anyone hit on web url he or she will able to see the location. Is it possible?
is good relay nice idea yes is possible
@@JustDoElectronics can you make a video on it? It will be helpful for me because i'm doing my university project on this topic ❤️
Can you help me with the project pls reply me if yes
Sir,
Can this module be added for several phone numbers? maybe 3 phone numbers?
yes
@@JustDoElectronics Sir, how?
@@JustDoElectronics howw
Hi
I think setlgnition() function not use in code that is implemented at the end of the code is not use in the main code
Please check it out
ok
Fuel measuring like sima kit ki traha projects banao
Total cost bata de??
Baad ma
Top Notch
Can i make this design same ij bread board instead of pcb board??
Yes
i just wanna know how to connect with phone? sms? how u make it?
Bhai kitne range tak ki location track ho payegi is se??
Can you elaborate on the key sensor? what exactly does it do, thank u
It is the voltage devider value on A0 that will determine if ignition switch is on or off.
how to work 14 disit no
Which sim is used ?
good work but working with arduino nano?
Yes, of course
Thanks for the project. There is an alert when using resistors on input A0 when calculating the value of the voltage entering the Arduino 8 volts. This is a danger. The input must be 9 volts on the 1M resistance, not 100K???
Reverse register value ,you get right voltage for Ao
Sir aapake code ke saath prograam banaata hoon, lekin ek samasya hai, jab main ignishan sensar ke saath lain karata hoon, to mobail par ek sandesh aata hai, lekin jab main sandesh bhejata hoon, to koee uttar nahin aata hai aur yah kaam nahin karata hai
Any GPS module works in indoor with in range of 1500rs any suggestions
yes
Bro how can we connect to mobile for operating
Sir can you do this in proteus
yes
can i use GSM 900L sir? instead of sim 800L?
sir i used a 4g sim is there any module that supports 4g sim?
yes
Which module can be used?
port konsi select ki hai
Can We send those details of coordination to native server instead of phone number,and create a registration form and collect data of the people and send the coordination to the person who have registered to the native server.
ok
Can i use 4g sim?
Yes but not jio 🇮🇳
everything works perfectly except that it shows me an error on serial monitor when sending GPS coordinates, please help me
change board rate
@@JustDoElectronics thank you, it works perfectly, just one thing, I see on the serial monitor a countdown for the messages received, after 70 messages is it that the gsm module no longer accepts the messages? if it's true how send this.
@@amine1931Can you help me with the project pls reply me if yes
How to get lat lng value in LCD 16.2
just attach the lcd is doo the code
Hi Sir
I have done all step by step. tested Sim800l & NEO-6M all working perfect.
But when I load your Code do all the pins as per Code I do get on the serial after sms bike on I get
AT
OK
ATE1
OK
AT+CPIN?
+CPIN: READY
OK
AT+CMGF=1
OK
AT+CNMI=2,2,0,0,0
OK
+CMT: "+27 Follow MobileNumber" , " " , " , "23/08/31, 17:41: 50+08 "
bike on
And that is that nothing else happens. Please can u assist 🙏🙏🙏
Is it possible to use nano?
Yes
what is the logiciel of simulation ??
In which platform we can draw the circuit diagram like yours
EasyEDA
What apps did you use to message Sr??
I need code
Check it website
Code please and diagram??
How to download sim 800 l Libery
Data hardware part ta thik clear holo na
Please ota atu bolbe🙏🙏🙏🙏
How to change board rate bro
My gps blinkig but not showing longitude lattitude cordinates
My gps not blinking any clue?
Can you help me with the project pls reply me if yes
Dada please mention the name of the components and please give the code
Problem statement:-
when an object enters into the geo fence, the buzzer and led will turn ON until object is in geo fence.
Please can u help with this
Code and hardware idea
Hi may you upload
code ?
In the description
Which Recharge use for this sim
sms pack
where did you bought the key sistem?
online
Sir using 4 channel relay plz code...
Bro buzzer diagram not show...
Circuit diagram
Arduino not respon sent sms replay
Can we buy your prototype ??
Yes
buzzer ka kya kam hai ,how to connect buzzer pin
if you not required then you not put it
But you hadn't told why u have use
@@arughanawhen if any person try to unlock the bike or car that's time buzzer is beep
@@JustDoElectronics thanks for replying my question
@@arughana Your Welcome
Total price of the model
if you making your own then is cost around 2500
He Uploaded wrong circuit diagram and code😢
key on karne pe bhi motor on kyu nahi hua
ku ??
How much of the cost bro
check website
Bhai ye code to work hi nhi kar ra
kar rahaa ha aap ko karma nahi aa raha ya boloo aap
@@JustDoElectronics sir code compile ho raha hai but upload me problem aarahi hai uska solution batao ????
Nice sir ❤️
So nice