Video není dostupné.
Omlouváme se.
Pressure pump fitting | Automatic pressure pump | Washing machine pressure | Shower pressure
Vložit
- čas přidán 24. 10. 2022
- Know how to fit Pressure pump for washing machine or Shower.
Sequential procedure is shown in this video, to fit Pump easily.
Here is the link for V guard automatic pressure pump:
amzn.eu/d/iRblLBG
Link for fixing washing machine or fridge on adjustable trolley / Stand :
• Fix washing machine on...
Approximate expenses for Pump fittings:
1) Pressure Pump cost : 4500 INR
2) Piping fittings : 1500 INR
3) Plumber : 500 INR
4) Electrical fittings : 600 INR
5) Electrician : 500 INR
Total Cost is around 7600 INR.
Thanks for your information, I spent @RS 4500 /- total cost. @RS 2500/- for a Pressure Pump ,@RS1000/- for Electrican and plumber and Approx @Rs 1000/- for Fitting material.
Hi which pressure pump and from where to buy ?
Please share the pump details
Hi
ekadam mast explanation, kjup changali mahiti milali.
I like your output piping. Good use of a single motor for at least two outputs
Thanks, Sir, for giving me good information.
Thanks for the info!
Thanks , useful info, how long u r using this pump..
Just wanted to confirm on pump positioning, as per instruction it should be horizontal not vertical, but as per space vertical is more suitable so if it’s working fine for long duration than it’s fine.
I am using it from last 1 month.
You are correct. motor shaft shall be horizontal as per manual drawings. I have kept pump in wrong way, to remove maximum water from syntex. That is to reduce dead volume of Syntex tank.
If you can install pump below bottom line of Syntex, then you can keep pump with horizontal shaft position ( 3 correct positions given in manual). Also you can remove max holdup of Syntex.
@@deepakkhilari7415 sir what is syntex?
Sorry spelling mistake. It's sintex tank. That is white tank shown in video
Bitha hai ya nahi on your screen first got message never install pressure pump for wm
What's price of pressure pump
Can water flow reverse when the motor is switched off to fill the tank from other source?
Can the same pump be used to get pressure in shover ?
Means can I install it after geyser
Do you need hot water in shower ? If yes then no need to install pump after geyser.
You can install pump at bottom of water storage/Syntex tank. This will pump water to shower via geyser. But for more flowrate of 30 LPM, you will not get very hot water.
Geyser Inlet if fixed on Pressure Pump outlet the problem is solved -- The pump is than pussing Cold water to Geyser resulting in enhanced pressure fro Hot water outlet in Geyser. The pressure pump can route the hot water also -- But the Aforementioned techniques enhances the life of PPump.
Rgds
Very good and informative video
Thanks a lot
Hi i connected water booster pump’s outlet to my washing machine and the machine doesn’t seem to auto start. However when test it disconnecting to the machine, it works fine. What could be the reason?
Please watch complete video. Suction piping shall be similar to video to work pump in auto mode..
There shall be gravity flow from line/pump to start pump in auto mode.
Syntex tank and water pump shall be above washing machine as like video.
@@deepakkhilari7415 in my case the tank is smiliar to pump but still not working
Hi , I live in an apartment where pressure is always maintained but water has a high salt content. I have a counter top dishwasher but due to high salt content scaling appears badly. I have planned to install a plastic tank (50L )beneath the dishwasher. I'll connect my R.O to the tank. If I run R.O say 4-5 hours then the tank will be filled with clean water. Till this step I have no doubt. If I connect the pressure pump from clean water tank ( located under ) to the dishwasher inlet and set it up in auto mode will this arrangement work. My intention is to supply clean water to the dishwasher. Dishwasher typical consumption per cycle is 10 L max .
Hello. I am assuming that Dishwasher bottom and 50 L plastic tank bottom is at same level. Pressure Pump suction is connected to 50 L plastic tank and discharge is connected to Dishwasher. Pressure Pump inlet and outlet line size is 1".
With above arrangement you will get pressure around 1 kg/cm2 gauge and 24 lit per minute flowrate. I think it will work and satisfy your requirement.
Elevation of "50 L plastic tank with pump" can be above Dishwasher.
But do not install "50 L plastic tank with pump" below elevation of Dishwasher. It will reduce pressure.
@@deepakkhilari7415 50 L tank will be placed below the counter i.e below dishwasher because 1. I have no loft
2. Even If I fabricate a stand and place the tank above dish washer I will not be able to pump the R.O water to the tank. Any other alternative?
@Prashanth ji, 1 to 1.5 meter height difference between pump and Dishwasher is acceptable.
That is pump is at floor and Dishwasher is above 1 meter.
@@deepakkhilari7415 Thankyou very much for guiding me.
Thank you for appreciation.
मेरा यहि पंप है पर बॉश् प् फ्रन्ट लोड मशीन पानी लेना शुरू करें तो ये पंप ऑन नही होता !
पैनासोनिक का टॉप लोड मशीन में यह पंप ऑन हो जाता था 😂
Hello please reply... I bought Bosch dishwasher and done the same setting ( in comment section Mr Prashant put a query)but my setup doesn't work. I bought lubi pump and set the tank of 35 litre above pump with 1 bar pressure approx hight 3 feet.. and now i bkm panic and searching solution on net and I found this comment.. please help me to get rid of it
Ok. I am not getting clear idea. Can you send pictures of your pump, tank , washer setup.
deepak.r.khilari@gmail.com
is preasure pump lagene se keya gyser ki jo hot water ki speed obhi barenge or uski liye alag preasure pump lagane parega?
geyser se pani aa raha he usaki speed badh jayega. Lekin jyada speed ki wajah je pani ka temperature pahile ke mukabale kam hoga (pump lagane se pahile).
thank you Depak Vai.
Hello sir
Maine same pump mere dishwasher ko lagaya hai par wo auto pe kaam nahi karata manual rakhana padata hai .. kuch idea hai kya pls batana
Pl watch complete video.
Suction line video jaise karo. Syntex tank and pump, dish washer ke upar hona chahiye. Pump ko bypass mat dena
Line/pump se gravity flow hona chahiye tabhi pump auto start hoga
Bhaiyaa, isse off on kese krna, matalb hr time on rahta ya, jb use krna ho har bar upr jake on krna,.. Ye clear kr dijiye
Aur jb light nai hogi, to phir pressure pahle se bi kn nina ho jayega
Auto me rakhna. To har time on off karna jaruri nhi. Pani ka use nhi hoga to automatically band hoga. Pani ka use karoge to automatically start hoga.
Light nahi rahegi ya fir pump switch band karoge to pani ka normal flow hoga by gravity
@@deepakkhilari7415 inverter se connection de skte hai...
Inverter par load kitna dalegi..?
I had installed dsk 0.5 pressure motor 4yrs ago. But recently there is a water leakage occurred from the motor near the outlet point. How can we fix it?
Ok. Please check leakage from pump or piping. Damage of Pump gasket can cause leakage from pump.
@@deepakkhilari7415 Plumber told there is a internal leakage from the pump. Plumber don't know to repair the pump. Who repairs such pumps?
@@feddythechamp contact manufacturer's customer care number.
Hi Deepak Thanks for the Video Mate !! I am facing pressure issue in the shower and Toilet flush(no tank flush valve) The vertical height between the tank and shower is 4-5 feet only. Can this VGuard little pump of 0.18hp solve this problem. Or do i need to buy a 0.5hp bigger pump. I read in reviews that this small pump doesnt deliver enough pressure for shower & Toilet & the 0.5hp pump is a bit expensive and might also cause leakage issues in the connections because if higher pressure. Will appreciate your suggestion.
Yes. 0.18 kw pump is ok for 5ft height.
That is shower is 5ft above tank. You will get around 1m3/hr flow for 5ft height.
If your tank is 5ft above shower then you will get 1.8 m3/hr flow
@@deepakkhilari7415 thank you !!
How about the noise? Is it noisy?
Not much
I have Bosch washing machine. It's display shows low water pressure tap symbol but clothes are washed very well. Just it takes 10 mins more than its usual time. I think low pressure will not affect washing machine. Am I correct Brother
For front load washing machine, Pressure is required. Lower pressure can cause water valve failure.
If your machine is working then Pump is not required.
Is your machine front load?
What is the approx height difference between tank/ Syntex to washing machine?
@@deepakkhilari7415 yes mine is front load washing machine. May be 15feet height. Washing machine working properly without interruption but taking 10 to 15 mins more time than usual
@@deepaksonu1785 ji , machin is working fine then no need to invest in pump.
@@deepaksonu1785 for 15 ft height difference you are getting around 0.5 kg/cm2g (7 psig) pressure ) that is enough..
@@deepakkhilari7415 thanks for the valuable information 🤝🤝
I have no sintex but i want to buy washing machine so what can i do for water pumping. ...
Ground
If possible install sintex tank 5m above machine. Pressure pump for washing machine will not required.
Please read the instructions on pump, pump shaft should be horizontal not vertical
Can it be work in fully automatic front load washing?
Or what means automatic mode in motor can it be operated automatically while my washing machine is on ?
Automatic pump starts only when you consume water for washing machine or shower or tap.
Once you stop consumption, pump will stop
After seeing your video I will install this same motor normally it’s works fine like when I on the tap the motor will be start automatically and stop after off the tape but in case of fully automatic washing machine it’s not working properly
Sir v gaurd ka aacha h ya fir BTALI ..plz reply
V guard. Using from last 2 months and working smoothly
@@deepakkhilari7415 iron ki body h toh junk lagega ? Kya ?
Water ke liye chalega cast iron material.
Sir i have a query....
I have top load Samsung Washing machine. But the tank is merely 4 ft above the ground and on that same floor i have installed the washing machine. So i dont get the appropriate pressure. Will this motor can solve my problem ?
Yes
It worked for you with 4ft height now ?
Kya yah niche se Pani khich sakta hai
Khichega. Niche 5 meter se height jyada na ho. Foot valve acha hona chahiye.
Niche se Pani khichane ke time ye auto me kam nhi karega. Manual me karna padega.
Auto sensor ke flow switch ka on and off threshold kya hai? Yeh setup kiya hai maine par washing machine and dish washer ke flow rates pe auto start nahi hota har baar.
Yes aapne kaise solve kiya ye issue
ek pipe aur valve tank mein back flow ke daal diya - jabhi washing machine chalata hun tabhi motor bhi on aur valve half open kar deta hun (motor on auto mode always)
Aur pipe diameter 0.5 se 0.75 kar diya jisse dishwasher bina motor ke chal jata hai
@@nitinsahu5789
Same issue for me
Kitana hp ka hai sir ?
Sahi hai sir
Thank you 🙏
I want to buy it for my washing machine
The tank is on ground level as well as washing machine is on ground level
Will this pump satisfy my requirement.. ?
Pump will work in manual mode only in ur case.
There shall be gravity flow from line/pump to start pump in auto mode . That is possible in my case shown in video.
To have gravity flow from line and pump , Syntex tank and pump shall be above washing machine.
Thanks for useful information...keep it up 💯👍👍👍
Thank you🙏🙏
Gav konta apla
20 A switch algse lagana pdega Kya?
Yes. For safety
Sir v.guard pressure pump price ???
4000 rs . Expenses are in description
4200
Washing machine ka line itna uper se kyu liya niche se sidha kyun nahi liya
1.48 wrong pump installation
Check user manual
Kha milega bhai, price
4200
Amazon
Details given in description
Hello sir thank you so much for making video as i was finding such videos. Yesterday i install the same motor but i am not satisfied with the pressure as i can only see minimal difference as if i want to explain u in simple words i live in apartment where we usually gets water at morning 8 and evening 8 so. The pressure which is get at that time i was expecting same but when installed the pump i am not getting that pressure as when the machine is off the pressure which get is only 2-3% difference when the motor is on . If you sir don't mind can please get ur Instagram id or something where i can i cannot with you and share you the video please. I installed this motor on 26 July and i am commenting on 27 July night that is 01:27 hrs
deepak.khilari.5
भाई साहब आपका सर्विस मुंबई वेस्टनमें कहाँसे कहाँतक है.आपका काँट्याक नंबर प्लीज.
I am only video maker
यह पंप भी ठीक से काम नहीं करता है।
I am using from last 7 months. No issues
Thumbs down for the clickbait thumbnail👎
share your mobile no. we need to install for washing machine
Please see complete video and follow same.
Share video on insta deepak.khilari.5