Don’t make THIS common mistake!
Vložit
- čas přidán 8. 07. 2024
- Want to take amazing wildlife photos? Check out my new course with 20 modules and over 5 hours of content, no fluff!
journalofwildlifephotography....\
Join me in Botswana in 2024!
www.simondentremont.com/botsw...
My name is Simon d'Entremont and I'm a professional wildlife and nature photographer from Eastern Canada. In this video I'll share with you how I take care of my gear to make sure it works at its best.
I use Topaz Labs software for noise reduction, sharpening and upscaling:
topazlabs.com/ref/1943/Simon/...
Music in intro: "Nicer", by Houses on the Hill. Find that, and other sound effects at Epidemic Sounds
share.epidemicsound.com/0fbndn
My equipment:
Canon R8 body amzn.to/3Iv9aAS
Canon R5 body amzn.to/3UQeROc
Canon R6 body amzn.to/3RpYqVX
Canon R8 body amzn.to/3AR2mcA
Canon R5 battery grip amzn.to/3dUrHKF
Canon 100-400 EF II amzn.to/3UQi4gJ
Canon 17-40 L lens amzn.to/3y71MGt
Canon RF 16mm f2.8 amzn.to/3EmPNJ1
FLM Tripod (CP 34 L4 II) and Levelling Head (HB 75) www.flmcanada.com?aff=sdentrem
Sigma Art 50mm f1.4 lens amzn.to/3fkRjAC
Sigma Art 20mm f1.4 lens amzn.to/3CjKto2
Rokinon 135mm f2 lens amzn.to/3SoB3x3
Sirui x-k40 ball head amzn.to/3E7Z5sc
Sirui lightweight Traveler 7C tripod with head amzn.to/3dS9Bca
Manfrotto Video Head amzn.to/3RlZie5
Wimberley Gimbal Head amzn.to/3flhya8
Jackery portable 240 lithium-ion battery amzn.to/3rCzX5r
ProGrade Gold 128 GB CF Express amzn.to/3fyx1nh
ProGrade Cobalt 325 GB CF Express amzn.to/3y3Ywf1
ProGrade Gold 256 GB SD amzn.to/3y0Xssg
Zoom H1n field recorder amzn.to/3Sozob9
Comica shotgun mic amzn.to/3REWN73
Rode Videomic NTG shotgun mic amzn.to/3BRlcQK
Rode Wireless GO II mic set amzn.to/3BUfIoh
Lenscoat neoprene camera bags amzn.to/3SNiqmz
Lencoat rain cover for 500mm F4 amzn.to/3SGtyl2
Falconeyes F7 LCD panel amzn.to/3y75z6F
Lowepro 450 AW large backpack amzn.to/3xZOHyL
Lowepro Flipside 300 small backpack amzn.to/3SOTWt7
Mindshift 36L (closest available) backpack amzn.to/3C0fagy
DJI Mavic Air 2S drone (flymore combo) amzn.to/3M9TuDL
B&W circular polarizer, 77mm amzn.to/3SKc6Mx
B&W 2 stop ND Filter amzn.to/3URyIN6
B&W 6 stop ND filter amzn.to/3y6gs8G
B&W 10 stop ND filter amzn.to/3fwRIjs
Nikon Monarch 5 8x42 binoculars amzn.to/3URprEz
Blackrapid retro-classic shoulder strap amzn.to/3y0wUHt
FjallRaven trekking pants amzn.to/3y77DeV
Heat 3 gloves (shell only) www.theheatcompany.com/en-us/...
Heat Company Merino Wool liners www.theheatcompany.com/en-us/...
HP Omen 17.3" performance laptop amzn.to/3BZ7w69
Synology NAS storage amzn.to/3BXfcWF
16 TB hard drives for NAS amzn.to/3LTdrOW
Follow me on:
Facebook / sdentrem
Instagram / simon.dentremont
Website www.simondentremont.com/
If you're trying to locate dust on a sensor, keep in mind that the image is flipped upside down by the camera's electronics. Dust at the top of the image will be at the bottom of the sensor and vice versa.
Thanks for posting that!
yeap and if you know what you doing you will buy a good loop and not waist time on shooting images and looking something what might not be there
...and mirrored. (Dust in upper right on the image is at bottom left on the sensor).
But not on a mirrorless.
@@katjathelion The lens flips the image so it'll be true regardless of mirrorless or DSLR.
I live in the Yucatan and have the opposite problem. Inside, with air conditioning, the storage environment is cool and dry. But, as soon as I go outside, with the tropical humidity, my lens elements immediately fog up. So, I leave my gear in the bag outside for about an hour before I use it, so it has time to slowly acclimatise to the outside environment before I can use it. 😅
I had to do that when I visited Florida. I think I only had one kit lens at the time, but it was still pretty bad for fog. I live in Canada, and haven't had any problems here, especially as I usually go from location, to car, to house, so there's that middle step of a vehicle that has some heat or air conditioning, but not as extreme of a difference.
Our AC in Tamaulipas only cooled the bedroom to 80 degrees, but anyway I didn't have a digital camera then and never knew of these issues :)
I have the same issue traveling in South China and Southeast Asia. I purchased one of those "dew heater strip" devices that wraps around the lens and warms it. It plugs into an external battery via USB and warms the lens to a similar temperature as the ambient outside. In this environment, I have found that the lens needs to be warmer than the dew point coming from the humidity cabinet. This may not be the best solution, though. If someone has better advice, please do let me know. One downside to the dew heater strip, it is not a smart device, so it doesn't have a timer or cutoff. It will continue to warm the lens if you forget about it and leave it turned on.
You live in a beautiful place to photograph Macaws! While visiting Costa Rica in 1992 I was eating breakfast on the beach at my hotel. I looked up and saw a Scarlet Macaw in a palm tree about 12' from my table. I stood up, held out my arm and the Macaw flew down and landed on my arm' We shared breakfast I was allowed to preen a few head/neck feathers! Living in CO with four large Macaw companions, maintaining humidity indoors with humidifiers and outdoors with a misting system maintains beautiful feathers and happy emotional states for all of us. How long have you lived in the Yucatan?
@@MacawAviculture Hi! To be honest, I haven't seen macaws here in the wild, only in captivity. I live in the northern Yucatan ... about 40 minutes south of Playa del Carmen. There are, however, plenty of other, gorgeous tropical birds to see in the area. While they aren't common, I've even seen keel billed toucans around the neighbourhood, though I've never had a camera with me when it happened. HOWEVER, my wife is from Caracas, Venezuela, and that's been, for me, the place to see macaws. They're everywhere down there: downtown, ... in the suburbs, ... along the highways, absolutely everywhere. Big blue ones. Lovely looking, and very noisy. You always know when some are near. They always travel in pairs, too. So you never see just one. I'd love to see a scarlet macaw, though. How wonderful for you to have one keep you company for breakfast. Thanks for the note.
Good tips with one exception. While cleaning the camera body lens mount is a good idea it should probably be done before cleaning the sensor itself, not afterwards, as it may dislodge dust particles that then fall on the previously cleaned sensor.
I have a youtube folder: "photography masterclass." Before I found this channel it was a hodgepodge of content creators, but lately, every entry has been "Simon d'Entremont, Simon d'Entremont, Simon d'Entremont...". Today I gave up. I now have a "Simon d'Entremont Masterclass" folder.
Haha too kind!
An important point often neglected is cleaning of lens and camera body caps.
Over time they can collect a lot of dirt, particles that then transfer to lenses and sensor.
So regularly also blow the inner surfaces of these caps, and as they are made in plastic you can even simply wash them with soap and water.
I once made the mistake of putting my lens cap in a linty pocket 😅 discovered my mistake the next time I took the lens cap off 😬
@williamstrachan get some low tack adhesive discs and put them on the back your lens caps and camera body caps .dust will stick to these keeping them from the lens elements and sensor .
One other tip for changing lenses is to turn off your camera. Your sensor is an electronic device (obviously) but with this, has a bit of a charge to it especailly when powered on so this can sometimes attract dust particles, so you should also turn off your camera when changing lenses (it's strongly recommended anyway, not so much for dust, but because it could cause the camera to not recognize the lens in some cases - although I've never really had this happen, but more importantly, some in-lens stabilization systems need the camera to be turned off first so it "parks" the lens stabilization motors in their place). Another tip is when you have spare body and lens caps, screw them together so they seal so dust doesn't get into them while in the bag (also make it a point to blow out lens caps before putting them back on, as any dust in the caps will just get dumped into the back/front of the lens, and possibly then onto your sensor the next time you use the lens -- if it's the rear lens cap.
turning off/off the camera may also trigger the electronic cleaning process too, I have had that clean the sensor without needing to do anything, or just some air then the electronic to get the dust out, and not needing to use the sensor swab
You are by far the most effective photography teacher on CZcams! Thank you for these tips and taking the time to thoroughly review topics that are probably not as exciting to you, but as you can see in the other comments, super helpful to us.
I agree with you Zachary 100%. I love the way he explains the subject. Thank you Simon
A great resource 😊
All nice tips, thanks!
Glad it was helpful!
The only tutorial that I keep watching it from the start to the end every single time. Great work thank you
I once shot an interview where the image from one of the cameras was blurry. It took me a while to realize that although I religiously clean the lenses before shooting interviews, I had only been attending to the front element and ignoring the rear - which turned out to be where the smudge was. So, now I clean the front and rear elements before attaching the lenses to the cameras and heading out. I hope that isn't excessive...
My wife is astounded that I keep all my gear in separate drawers in my dresser and that I'm gentle with it.
I told her that it's my livelihood so I take care of it.
One last step with lens cleaning is use the blower to blow dust off the lens facing side of your lens cap.
Humidity has killed so many of my lenses. The most recent was a Canon EF 100-400 L Mk 1 with a bloom of mould across some of the inner elements. If you live in a humid country or just have a damp problem in your ancient house, like I do, keeping your gear in a big plastic box with a rechargeable silica gel container is a cheap way of keeping your lenses and bodies from dying.
If you have such expensive gear you need to invest in a dry cabinet.
I've watch a few of your videos and man! so informative but fun to watch. Even though I've been a photographer for a few years I've learnt lots of useful tips and knowledges from your videos. Thanks so much Simon.
Condensation is the enemy of electronics. I live in a bus with a couple of desktop computers, sometimes out in the arid west where humidity is seldom a problem, but sometimes back east or even along the coast where humidity is usually high. The worst condensation problem I ever had was a two-week period when the bus interior reached the dew point. It stopped both computers from working. It was so bad that when I pulled a memory stick out while drying to dry the system, there was just a bit of water dripping off the contacts. Since the bus is usually dusty too, I basically end up with a muddy motherboard.
One thing I've done to fight dust is keep my good camera and lenses in a case, and then I put that case is a clear plastic trash bag. It seems to help a lot.
I’m so glad to have found this channel. I’m just beginning my photography journey and to find a seasoned photographer with such great photos sharing tips… I’m surprised this channel hasn’t blown up yet. It will. Thank you Simon for your tips for the next generation of photographers!
Mr D' is no doubt the best Wild Life Photographer, and Presenter of his work, and Educating those of us that love Photography.
too kind!
@@simon_dentremont So did you make it through your trip without getting a lot of problems with dust on your sensor? I live in a dusty climate and it is a constant battle with me. Oddly, my father doesn't have problems nearly so much this way, the only difference being my camera is a Canon and his a Nikon.
Basic but important concepts that I will strive to keep in mind. In the past, sometimes I have and sometimes not!
2:01 adjust lens focus/zoom so that rear element is as close to the mount as possible, to minimize gaps where dust can get into the lens. 6:40 if you clean your mount, do this before cleaning the sensor.
This is a great help, thank you.
Great advice! Thanks!
One thing about modern digital photo sensors: they are really robust. The filter on top of the sensor is pretty much the same as your typical UV screw filter as used on a lens. The Challenge is to clean it without anything left, not to not damage it.
However: unlike a lens front element the protecting sensor filter is one of the more expensive repairs to be performed on a camera. So dont force it.
I hope you're right about this. The main IL camera brands are Canon, Fuji, Nikon, Olympus?, Panasonic and Sony (am I missing any?). I'm curious how you know that all these brands deal with that filter atop the sensor in the same way...that they are all, in fact really robust. Like I said, I hope you're right!!!
Excellent video, thanks a million.
A few years ago I had a new Nikon D7200 and somehow managed to get dust on sensor. I then successfully managed to ruin the sensor trying to clean it.
Thankfully a local camera specialist did a fantastic job and saved the sensor. Best £30 I've ever spent, still use the D7200 to this day.😊
Excellent advice...this is my favorite photography channel. Clear, concise , and to the point. Five stars.
Super tips, thank you. Hope you enjoy your trip and bring back some great images!
This is awesome. Thank you
Great video! Thanks Simon!
Thank you for the reminders! 👍
I chuckled at the "hold the camera to your body" when swapping lenses. Not only is there a sizeable amount of dust, dander, and dreck--the difference in electrical potential can actually cause static electricity to drive rubbish into the well body where the sensor and/or mirror are located. Also, it's a good idea to discharge brushes or cloths prior to using against something grounded. Once upon a time, antistatic brushes using Polonium-210 such as StaticMaster were all the rage. You can still get these, but they are only good for about a year.
Thanks, Simon! Yet more great information and tips! I will add: those rain jackets protect well in dusty conditions, and, if in dusty conditions and you use a zoom lens extended, wipe the barrel before retracting the lens to help keep dust from being sucked into the inner lens. I have dust inside my 100-400 MK II which is supposed to be well sealed--can't get it out.
Amazing...thank you! 👍
thanks so much.
Wonderful tips! Thank you!
Good tips. Something I like to do before selling my gear is to look at my cameras and lenses under a light with a magnifying glass. Even after cleaning I'll find a couple more dust particles that I couldn't see with my eyes alone. I know these particles don't matter much. But, I like to get my gear as clean as possible before passing it on to the next person.
Great tutorial! Every photographer should watch this. I baby my gear because I know down the road, I will sell it to buy new. It is inevitable that my lenses and camera get dirty photographing birds on trails and at wildlife refuges. I live at the coast in NJ. Lots of shooting by salt water, so I like to give the outside of my camera and lens a wipe down with a water dampened cloth after a day at the beach due to the salty air. I've really enjoyed the photos that you've shared so far from Botswana. Remarkable!!! Thank you, Simon!
One important thing is that sensor cleaning with IBIS are usually done with camera turned on and IBIS off to stabilize the sensor and not to move around the delicate IBIS mechanism while cleaning. Idk if that's the case for newer Canon R5 and R6 cameras.
no, it’s off during cleaning.
Mr. d'Entrmont, another great video sir. 100% agree with everything...I have the rain hood you presented. I just keep it in my bag as it takes little room and had to use it while shooting a Civil War reenactment and it poured at one point. Another added thing I've been testing for a year for dust and lens protection is KUVRD lens caps for water/dust/bump protection.
I ruined all my lenses years ago when I was starting out with photography, extreme temperature changes was the main cause, not storing the gear properly allowing fungus build up in the lenses. I learned the hard way. thank you for another video.
Simon is such a brilliant photographer and communicator. My go to video for wildlife photography tips every week. And he has also got great taste in music! I love his theme music. If you don’t know it is a track called “Nicer” by Houses on the Hill and Rue Rosa. I had never heard the track or the artists, but it complements Simon’s tutorials so well. And I am always left with the feeling that the world is actually Nicer for hearing the track and because of Simon using it. Looking forward to the tips from the trip to Botswana.
Too kind! Thanks!
And how many of those moronic Jump zoom cuts did you dodge before the actual message of the video!! LOL
Thank you for teaching me how to clean my sensor safely!
One little tip I do when I’m going out to shoot in cold and humid environments is that I take my camera body and lens(es) I plan to use and put them into ziplock bags. Especially going into very humid climates. Then I place those items into my camera pack and place my camera pack into the truck of my car for my drive to the location. This allows the gear to acclimatize to the temp change as I drive without any humidity affecting them. If it is really humid and I have issues with fogging of my lenses, I also keep a power pack and a lens warmer in my pack. I put them on my lens and it keeps my lens’ front element warm enough to keep moisture from building up on it. It also helps heat the lens barrel enough to help create a warm zone inside the camera to help keep the sensor from fogging up as well. The power pack I carry is a 50k mah. I also have a charging cord in my pack for charging up on the drive. The lens heater comes in handy when working in very humid climates even when it isn’t cold. I do a lot of photography on the beach for sunrises and sunsets. Those times get very humid. My lens wrap as allowed me to get shots other photographers have missed because their lenses kept fogging up where mine didn’t. A lot of those photographers see me out shooting and know me now. They would see my shots taken the same times they were out and ask me how I got the shots when their lenses kept fogging up. I told them. Now most of them also have lens warmer wraps. I have a motto that I live by in my photography in the almost 40 years I have been shooting. Knowledge gained that isn’t shared is knowledge wasted. We should be teaching what we learn and always strive to continue learning. We will never learn it all.
Thanks. I live in Vietnam. It's hot and humid here so I keep my camera and lenses in a dry box to reduce the risk of mold growth and to provide a clean, organized place to keep my gear.
Great ideas! Thanks
Well done. Fantastic tutorial.
Thank you! Cheers!
Another I do, having a UV filter on the front of the lens. By using that, it protects the front of the lens from damage and needing to be clean. It is also much cheaper to replace a cracked/damaged front filter than the lens.
Same here! Simon, if you read this thread, any thoughts on UV filters? It looks like you don't use them!
Thanks Simon. This is extremely useful!
Not only was this a very useful video, but it also removed a lot of stress about cleaning the sensor, thank you for posting!
Glad it helped!
I use distilled water to clean lens elements, found it works better than any chemical.
Recently found your page and you really are the best at giving clear and helpful information.
Thanks for the tips. Have a safe and fruitful trip.
Another great informative video! Thanks!
Merci Simon , des tips très utiles.
that was so helpful! thank you ❤
I'm so glad!
Nobody ever explains why circular motion is advised for cleaning your lens glass. I learned many years ago that IF you scratch the lens with a particle of dust or dirt it is far better to have a circular scratch as this minimizes it's visibility on any images. A straight scratch (i.e. wiping back and forth) will create distortion in your final image that will be far more visible. Always use a circular motion.
During winter, I do not use heat in the car on way home. When I get there, the camera bag is wrapped with my parks. in 6 hours all gear is at room temp.
Nice tips, I've had no end of trouble with dust on the sensor or my new mirror-less camera. Seldom/never cleaned the sensor on my DSLR.
Wow didn't know about the lightroom trick!!
Great video and appreciate all the time and effort you put into them to teach the audience.
Glad you enjoyed it
This is a very interesting video. And the cold environement tip is awesome. Thank for all this.
Thanks what great advise, you’ve helped me feel more confident about cleaning my lenses and especially cleaning the sensor in my cameras thank you 👍
a complementary tip i found useful is not to use the rocket blower lightly
THANKS FOR THAT LIGHTROOM TIP!!! That's awesomely helpful. Great video Simon!
Good tip! Sensor dust is the nemesis - especially in video!! I'm a big fan of the Visible dust Arctic Butterfly - the mild static charge for the brush "grabs" the dust - better to me than just blowing the dust around, though a good blower has it's place too. The only thing you have to be careful is not touching the sides of the camera putting the brush in - can place oil on your sensor and then you will absolutely have to do a sensor swab clean. But don't fear it!
Once again, amazing advice Simon! As a photo hobbyist, I really appreciate it!
Great advice! Thank you Sir!!!
Awesome tips even for the experienced, thank you…
Safe travels...
Excellent tips!!
4:07 keep in mind the dust that usually gets on the protection layer of the sensor now gets inside the shutter mechanism, the most fragile part of the camera. Its the first thing i turn off when handling a new camera.
Not sure if anyone else mentioned it, but for those using the big lenses with drop-in filters, those filters get surprisingly nasty dirty. I clean the one on my 500mm f/4 II once in a while and always surprised at how much filth gets on there, even with a lenscoat covering its location on the lens barrel!
Always great advice!
Thanks!
Have a great trip!
Just returned from Borneo. My way to protect my gear from condensation was to put the camera in a plastic zipped bag and throw in a couple of silica gel bags. Worked perfectly and cost me 5 USD.
Many thanks, very usefull! When I change lens, usually blow with a pump, but not with this such tiny pump, but with medical pump.
At home 1) blow the sensor 2) clean with a Lenspen sensorcleaner 3) blowing out again. Sometimes wet cleaning.
About condensation. First time couldn't figure out why my images were blurry as everything was clean and checked before going out, turned out the front element of the lens fogged up due to temperature changes.
Ur videos are my go to for photography tips...thanks
Happy to help!
Great advice, Thanks!
Thankyou Simon lam learning alot from you
Merci beaucoup
Great advice as usual!
Another nugget..... Fantastic advice again Simon. 👍
Simon, once again you continue to impress me with your very useful and "to the point" photography tips! One thing I noticed in your video and is something I do regularly is to change out your lens/camera cleaning cloths. They get dirty quickly and there is no excuse to try to clean a lens or camera with a dirty cloth and transfer the dirt/grime. Make sure you clean them too or just replace with new ones when cleaning your gear.
Yes they’re cheap so I replace them often
Awesome, Enjoyed the photos you have been able to send. Looking forward so much to your returning home, and sharing your Amazing Talents.
Just discovered little spots taking practice shots of trees and sky. Realized I needed to clean the sensor. Came right to this channel to wander through the videos and sure enough I find exactly what I need. All this stuff came with the kit, but would have been a tidbit nervous with a little guidance from Simon. Thank you, Simon! From me and my Canon.
Glad it helped!
Great as Always
Good points. Remember to clean camera mount before cleaning sensor.. also if you have a DSLR also clean the mirror, and maybe the semi-transparent mirror below it used to send light to the AF sensor. Plus battery door and pop up flash mount. For rainy conditions old fashioned shower caps can help but look, well old fashioned.
Botswana is beautiful! I look forward to seeing your photos.
I use an additional trick for condensation - i keep a dessicant pouch in my airtight camera cases. It will reduce condensation in temerature changes and reduces the possibility of fungus growing in and on your camera parts and lenses.
Thanks Simon.
There is a sensor brush whose use comes between blowing and swabbing. I've never needed to go beyond it.
Thanks! This is really good information! Much appreciated.
Good video...but I will offer advice; reduce as much as possible circular cleaning motion on any glass lens, or mirror. I routinely worked on laser systems in my +20 years in the US Navy; and then I worked (and retired) from Intel Corp, maintaining and repairing lithography equipment (the 40 lb lens in the Nikon Body 12 litho toolset 20 years back was a +million dollar lens). Cleaning of all mirrors and glass on those laser systems and lithographers was was specifically done in directional movement; circular cleaning lends a heightened risk of swirl scratch and was prohibited. Same goes for telescopic glass, avoid circular movements to the maximum extent possible. Of course, consumer camera lenses are not quite as sensitive...while a nice lens at 2-10K seems expensive to us as consumers (and it is), it is basically chump change for what is used in weapon systems or industrial uses (hence, the stringent cleaning procedures).
Great tips. The Lightroom one at the end is brilliant. Thanks for this.
One additional tip that could fall under the maintenance category, check for firmware updates once in a while, especially if you have never done it before. Mainly for your camera, but newer lenses can also sometimes get some updates to fix issues ore for compatibility to new camera bodies.
Brilliant!! Thank you very much from London UK
I've found that Mountain Dew is perfect for cleaning my sensors. For our local environment with all the air pollution from the East Palestine industrial accident, I typically clean it with mountain dew once a day. A few swipes with a typical kitchen sponge and I'm off!! Thanks great video!
fantastic tips as always Simon. Keep it up
Great timing
That dust locator in LrC is an eye opener. It also highlights how bad LrC's UI scaling is adapted to hi-res (like 4K) displays.
Good tips again Simon
Thank you for your content. Always helpful!
Second that!
I had been wanting to ask about this! Thanks for the tips, I thoroughly enjoy your presentations! Best of luck on your safari!