How to swap your automatic Miata to manual
Vložit
- čas přidán 5. 01. 2022
- Our first video is here!
Please subscribe, as we will have lots of exciting content coming soon!
Check us out on facebook: speedbyy
or our webiste: www.speedbyyllc.com
Tutorial to swap your automatic Miata to manual.
Parts you'll need:
Manual PPF
Manual pedals
Clutch master cylinder
Clutch slave cylinder
1.8 Driveshaft (assuming you are a 1.6 car)
Manual flywheel and clutch
Clutch line (SS braided is a great option)
Fluids
A Weekend
A friend (maybe)
A video the community needs!
i love you're tiktoks dude!
Boss, this SAVED my life! I am in the starting stage of my swap. I just ordered the rest! I was stressing hard about a drive shaft and the wiring. No one really goes into the detail you did. Thank you SO MUCH!
So glad it helped you! Good luck on your swap!
For real!!! I have a 97 automatic and my transmission started slipping, thank you!!
how much dd the swap cost you
I'm glad I came across this. I found an auto miata with trans issues, and I figured it'd be more fun with a manual since I'd need a new trans anyways.
This video came out at the perfect time. Going to look at an NA today as a project car, but this is going to be my first and was definitely stressing. It's an auto and reading about the manual swap felt like I would be going in completely over my head - but you made it look completely reasonable! Thanks for the great vid, liked & sub'd :)
Hoping today is the day I finally get to head home with a Miata...
bro this is the first video ive watched on your channel and i already love your videos
THANK YOU SO MUCH. I bought an automatic miata and ive been planning on manual swapping and didnt really know how to do it. This vid really helped me.
Dude thank you, I’m hopefully soon going to swap with my 2001 miata nb.
Completed the swap on my 97. Car runs like crap now. Idles at 2k + rpms and sputters when it occasionally drops down to 1k. Supposedly there is a pin on the ECU that needs to be ran to ground to tell the car it is a manual now. The circuit is called the AT / MT Designation circuit. This seems to be specific to the 96/97 cars. I have not tried to do this yet so I can't confirm in this info is valid.
What was the overall cost of this swap? I have an automatic nb and i'm saving for a manual swap.
surprised you have 77 subscribers, you'll defiantly have thousands one day 🤟cheers for this, about to swap mine to a 6 speed, hope there's not to much difference! Also, what ratio is the Auto diff? (1.8 1994)
Im hoping I can still use it with the 6 as an awesome touring car!
Great video but I am not a mechanic. I do own a 2014 Miata hardtop and I think the clutch is going out on me. Would appreciate some input. The clutch used to engage pretty far off the floor board but I noticed recently it engages just a couple inches off the floor brd. I am thinking it needs to be looked at now before too much longer. Thoughts and what I should know when searching for a mechanic to look at it? TIA
I'll never forget doing this for the first time 7 years ago
My manual transmission on my miata broke on the shifter housing part im replacing the whole transmission and clutch should i replace the flywheel or can i reuse it (trying to spend the least amount of money)
I didn’t see any mention of how you address the check engine light on the dash? My understanding based on some reading is that the ecu is confused because it it looking for the auto transmission and it isn’t there. I think you have to swap the ECU for a manual version to really fix this but I think it requires reprogramming and there is something with the immobilizer that needs to be adressed too, so I'm still researching. Any tips on this would be appreciated.
hey can someone just clarify that with the 1.8 u can reuse the auto driveshaft with the manual trans?
Thank you!
so what you're telling me is, if i manual swap a miata.... i mine aswell put a aftermarket exhaust too! Thanks
What'd you do with all the wires from the transmission computer?
What about the instruction to wire the transmission?
So if I have a 1.6 car and I’m swapping the 1.8 5 speed I will need the 1.8 driveshaft?
How much did everything cost?? And was it hard to find parts?
Does 1.6 transmission direct swap to 1.8 engine and differential?
Okay soooo dumb question here, after the trans swap, what needs to be done to remove the check engine light the RIGHT way lol
Are you able to get the check engine light off and my speedometer doesn’t work any help is appreciated
Hpw do you remove the vss malfunction code for the vehicle speed sensor
and do your dash lights still work?
How do you get the reverse lights to work after the swap ? Great vid btw !
Did you figure out about the reverse lights?
just swapped mie, The wriring is abit harder because I dont have have abig connector like you, I have a bunch of different wires lol
Did you re-use the automatic speedo cable with the manual transmission? Checking if they are the same to try and save $100
yes u can use
do i need to swap the ecu?
I got confused when you said to jump two wires for the neutral switch at the end, can you explain abit more what it does and why I need to do it, whats a neutral switch?
I was following up until that point ans got completely lost there. Did you ever figure out what he meant?
@@originalusername143 I forgot what i was confused about at this point but i do remember its most likely the Automatic Transmission immbilizer wires, which i had to cut and splice together, they are the two heavy wires in the whole bunch, much thicker then the rest, bridge them properly otherwise the car wont start.
If I bring a auto to you how much does it cost to swap
What about brake lights
Good evening, I just saw your superb video, with a lot of detail. I have the same MX5, but with a manual gearbox and I dream of making it automatic, I am told that it is impossible so give me your opinion please
If you were swapping a manual to an automatic wouldn't you require the wiring harness for an automatic transmission?
Can you reuse the bolts that hold the transmission to the engine?
Yes, Bell housing bolts are reusable.
i just bought a '95 NA with no engine, no transmission and no interior
it has all body panels in very good condition no dents or anything (only problem is small paint chips)
it has all the suspension, steering and brake components and its sitting on spare tires
it was originally a automatic and i want to make it a manual
any advise on bringing this car back to life and getting another miata out on the road would be greatly appreciated
question, will the spedometer still work after u manual swap???
yes
Why does do the break and throttle pedals need to be switched?
Because the auto break pedal is a bit larger and would hit the clutch pedal. Manual break pedal is as smaller.
Question, where did you connect the clutch plug?
Nowhere, I put a wire in to jump it.
Did you have to change the ECU and Starter ???
No! You’ll have a check engine light for transmission codes but it will run.
This information is out there, already. Thank you for touching on the neutral safety. But what about the odo? Reverse lights? Hardly any GOOD videos showing how people are getting those two components of a manual swap is done. It would've been a very unique video, had those bases been touched. But great vid overall.
Odometer still works with a speedometer cable, reverse lights are pinned into that large main connector.
Do you have a video of how to swap a manual Miata to an automatic?
Is the wiring different from the automatic to the manual do you have to spice anything
You have to wire up the neutral safety switch to the manual trans to start the car or you can jump the two wires together but im currently trying to figure out how to wire up the reverse lights
@@postit4273 nice does your speedometer work? I have the electronic version not cable.
@@leepeezy I haven't done the swap yet, im currently working on getting the manual trans out of the car I'm getting rid of so im not there yet
@@postit4273 okay
@@postit4273 did you ever figure out the reverse lights?
13:29 I’m having trouble installing my ppf
my miata wont start
same here i’m not getting a crank at all, did you ever figure it out?
Question is why did you buy an automatic in the first place!!!
Probably cheap enough that it was still a better deal than the rest even once the swap was factored in
Its so hard to find a auto i cant find one lol
Um, I actually only buy automatic Miatas. They are lovely. I mash the go pedal and gosh, it goes! I stomp on the slow pedal, and yup, I slow right down! Then when I need to I float around corners and curves just like god meant me to! Manuals are only good for overachievers who have something to prove. Besides, i need a hand free for my drink, my girlfriend, or a doobie! Just kidding about the doobie. That would be crazy, right? Settle down, I was joking, sheesh! I love my automatic Miatas those. They are simply sublime!
Couldn't agree more auto Miatas are abominations 😂