Thank you for watching. Please, don't forget to like this video and subscribe if the video was helpful for you. Let me know if you have any questions regarding Hollyland Mars 400S Pro.
Hi! Great video! I have the exact same setup with a C200 and a EosR. But I have a hard time color matching them for live stream. Would you like to share your settings for your cameras? It looked good in this video. Many thanks from Sweden.
i know Im asking the wrong place but does anybody know of a tool to get back into an instagram account..? I was stupid forgot the login password. I love any assistance you can give me!
@Khari Keaton I really appreciate your reply. I found the site thru google and Im in the hacking process now. I see it takes quite some time so I will reply here later with my results.
I bought 300 Pro and I wanted to buy 400S Pro for my Canon C300 mark III, so I can live stream with two cameras without any cables. This video really helped to make my decision.
Dave, how is it going? I'm about to purchase two sets! I want to use them for football live streaming. Are you noticing any interference between receivers when you place them next to each other on your table?
Thank you very much for this excellent coverage. I was looking exactly this type of information - the DELAY side of it. I'm building a setup for live stream weddings and those would be three humble Sony's (two mobile a7 III on monopods and one a6400 on a tripod) with nice primes, connected wirelessly to the Atem mini Pro ISO. I think that would do it.
Interesting question. When I compared using HDMI vs SDI output on my Canon C200, I didn’t see any delay difference. Also in my test I used SDI output of my Canon C200 and HDMI output of my Canon EOS R. As you can see in my test they both have the same delay. Occasionally I had one frame delay on my Canon EOS R. It could be because of HDMI output vs SDI output, but I think overall Canon C200’s both HDMI and SDI output is more reliable and working without any delay comparing to my Canon EOS R.
I have the same setup but my HDMi port to the transmitter will not read on my JVC camcorder . I can use the SDI on port on the JVC camcorder but on the ATEM minpro display shows a green like image
Tengo el mismo problema cuando conecto las cámaras con hollyland 400s pro al atem mini pro salen video verde lo conecto directo de cámara lo reconoce bien alguna solución De antemano gracias
Could you make similar video only with Cosmo line from Hollyland? I’m interested to see the delay difference when using HDMI connection vs Cosmo line wireless system. I think it would be really useful to see how sound sync will work when switch the cameras. Thank you
Thanks for a great video, particularly regarding latency with 2 systems operating simultaneously. On that note, how many systems can run simultaneously as looking at utilising at least 4 if possible.
@@austinscherzberg4569 Each transmitter needs its own receiver as they are operating on different channels. How would you switch with only one receiver?
Great Video! I was planning on purchasing 4 hollyland 300 pros for my sony a6400's. do you think I would have interference between the multiple transmitters? I saw you used 2...but am I pushing it trying 4?
Thanks. I used two Hollyland 400s Pro and one 300 Pro at the same time and I didn’t have any problems. I’m not sure about using four 300 Pro at the same time though. You should try contact them and ask if it’s possible. They have great customer support.
excellent review, no stupid unboxing (I mean , who cares what the box looks like) straight into the technical guts of it all and not 1 but 2 units to compare. thumbs up and sub from me. well done.
Thanks for the insight information bro. I have two sets of Hollyland wireless transmitters and an Atem mimi Pro iso. They work perfectly how my challage is audio when using DSLR cameras. Unless I use external audio capture device.
Andrew, thank you for your comment. I would say the latency is little bit less when your preview video in their app compared through their receiver connected to a monitor.
Glad that you liked. If you meant wireless set up using Atem Mini Pro, then yes, I used ethernet to connect to internet. When I connected 400s Pro’s receiver to my laptop using usb c to lan adapter, I just used wifi network. Hope it helped.
@@philpritchard5173 Sometimes we just use our mobile LTE connection for our live stream and depending on the cellular coverage, it works great. I just connect my iPhone to my Macbook using USB cable and turn on personal hotspot on my iPhone. Also using usb c to lan adapter you can share MacBook internet connection with your Atem Mini Pro using ethernet cable.
Thank you for this excellent video! This was exactly what my team and I needed. Any chance anyone can point me in the right direction for how to adjust the delays he showed in the video. I have three cameras. One is plugged in directly via HDMI to the ATEM Pro Mini, and the other two are using MARS 400s PROs. I'm just not familiar with the ATEM software, so a link to a tutorial or document would be really helpful.
Good day! Help me please. Question about Atem mini pro ISO. HDMI output goes to preview. With Tape-c we write to SSD disk. Ethernet goes to a computer for streaming. I would like one more output to the LED screen of the hall. Please tell me what adapters you need?
Hi, I am also interested in this question. I tried to establish a connection on 3 different computers with Win10,Win7,WinXP via a USB-E Lan 10/100/1000 Mb adapter (aliexpress) strictly following the instructions. Does not work. The Hollyland website has instructions for setting it up, it has a line: Note: The LAN-Type-C adapter could only be Hollyland Adapter. In your review, not a proprietary Hollyland adapter. Did you manage to set up RTSP USB C - Lan?
I’ve been talking to support and apparently for it to work you need to purchase the official Hollyland USB C Lan adapter for it to work. Supposedly it has some communication protocols built in that allow it to work. And the only way to purchase it is by contacting sales. I don’t know if it’s worth using that feature anymore. Haha
Thank you for the question. When we used two units of 400S Pro in our live stream, we didn’t have any interference issue. I think you can use up to 3 units without interfering each other. Hope it helps.
Hi Alex, thank you for the question. You should always have to keep different channels for each unit. I would say keep at least 2-3 channels difference. Let’s say if you have two units, put first to the channel 2and the second one to 8. This will help you to prevent any interference issues.
Update: I tried using a power bank with the transmitter however the transmitter was not pairing well with the reciever so I bought an npf970 and now it works well however both the transmitter and receiver are heating up. Don’t know why this is :/
Hi there, i am currently trying to connect my Mars 400S Pro via rtsp to a PC. Nobody ever talks about any problems at that step. But when i connect it via the recommended rtsp://192.168.218.25:5554 i do not get any signal (neither over VLC nor OBS nor vMix) - i already switched Network cables and tried it on three different PC (using the app i get a signal - so basically it's there and the screen states 1080I50). No success. Do you have to prepare your PC in any way for that (besides activation DHCP which is active by default anyway)?
Hi, honestly I had the same problem as you have. The thing is you can’t use any kind of LAN to USB C adapter. There are some recommended devices. Also Hollyland support team connected using TeamViewer to my laptop to make proper changes to make it work. So I would really suggest contacting Hollyland support on this. They’re very helpful. Good luck.
Díky za dotaz. Já bych řek jsou skoro stejné. 400S Pro má SDI vstup/výstup a trošku další rozsah. Pokud nepotřebujete SDI vstup nebo integrovaný video přenos do počítače přes USB C adaptér, tak v tom to případě 300 Pro je dostačující. Navíc 300 Pro má HDMI Loopout.
If you have your camera set at 4k and record internally to SD card.. can you then connect the camera via HDMI into the 400s and receive a 1080 signal at the receiver ? will it downscale the 4k input to 1080 to allow you to stream at 1080 but still record on the camera at 4k ?
Each camera has it’s own settings for HDMI output. Even if you set your camera to record 4K to internal SD card, you can always set HDMI output to 1080P. At least I have like that in my all Canon and Panasonic cameras. Hope it helped
@@Hayotfilmscom some cameras dont allow the HDMI output to be different from the internal recording resolution though.. it would be good to know if this unit can still downscale in those scenarios when you may need it.. have you tried 4k input to see what it does ?
I just tried it for you using my Canon C200. I changed HDMI output resolution to 4K and it didn’t work. So I think it doesn’t downscale it to FullHD from 4K. I hope it helped
Thank you for watching. Please, don't forget to like this video and subscribe if the video was helpful for you. Let me know if you have any questions regarding Hollyland Mars 400S Pro.
Hi! Great video! I have the exact same setup with a C200 and a EosR. But I have a hard time color matching them for live stream. Would you like to share your settings for your cameras? It looked good in this video. Many thanks from Sweden.
i know Im asking the wrong place but does anybody know of a tool to get back into an instagram account..?
I was stupid forgot the login password. I love any assistance you can give me!
@Emmitt Zahir Instablaster :)
@Khari Keaton I really appreciate your reply. I found the site thru google and Im in the hacking process now.
I see it takes quite some time so I will reply here later with my results.
@Khari Keaton It did the trick and I finally got access to my account again. I'm so happy:D
Thank you so much you saved my ass !
I bought 300 Pro and I wanted to buy 400S Pro for my Canon C300 mark III, so I can live stream with two cameras without any cables. This video really helped to make my decision.
Glad that helped. Thank you for watching!
Sorry Joao, May I ask that will they signal jam at the same time?
I just purchased three of these. Can't wait to get them and put them through their paces!
Dave, how is it going? I'm about to purchase two sets! I want to use them for football live streaming. Are you noticing any interference between receivers when you place them next to each other on your table?
Jeezz, that what I call creativity, nice prank at 00:26 made my day!
I love your B roll hahaha very neat and funny
Thank you very much for this excellent coverage. I was looking exactly this type of information - the DELAY side of it. I'm building a setup for live stream weddings and those would be three humble Sony's (two mobile a7 III on monopods and one a6400 on a tripod) with nice primes, connected wirelessly to the Atem mini Pro ISO. I think that would do it.
Cool! Glad that helped!
Thank you for pointing out how to connect it to the computer without ATEM Mini and Video Capture Card
Very helpful real world explanation video. Also nice is that it also works as an ASMR video.
Thank you so much for your video. I have been checking for the latency review for 400s Pro. Yours are the most useful ones. Thank you
Loved the cinematic intro!
Thank you for this review. It answered many questions I had about using the Hollyland Mars devices for live streaming.
Awesome B Roll in the beginning :)
Thanks, glad that you liked ;)
Can you explain to me, what is the benefit of the USB - LAN adapter, and what's the workflow to bring that into OBS?
Thank you for the testing audio delay. I was concerned how it will sync up using wireless video system if one camera was connected through HDMI.
Glad it helped!
Great video 👏🏾👏🏾
Brilliant overview, thank you!
Great video, thanks!
Greetings from Papua New Guinea.
Thank you for this video with very practical suggestions.
nice review. Did you notice any visible delay difference between hdmi and sdi connection? SDI is supposed to be faster than hdmi.
Interesting question. When I compared using HDMI vs SDI output on my Canon C200, I didn’t see any delay difference. Also in my test I used SDI output of my Canon C200 and HDMI output of my Canon EOS R. As you can see in my test they both have the same delay. Occasionally I had one frame delay on my Canon EOS R. It could be because of HDMI output vs SDI output, but I think overall Canon C200’s both HDMI and SDI output is more reliable and working without any delay comparing to my Canon EOS R.
NEW SUBSCRIBER HERE THAT INTRO WAS AWSOME
I have the same setup but my HDMi port to the transmitter will not read on my JVC camcorder . I can use the SDI on port on the JVC camcorder but on the ATEM minpro display shows a green like image
Tengo el mismo problema cuando conecto las cámaras con hollyland 400s pro al atem mini pro salen video verde lo conecto directo de cámara lo reconoce bien alguna solución
De antemano gracias
Could you make similar video only with Cosmo line from Hollyland? I’m interested to see the delay difference when using HDMI connection vs Cosmo line wireless system. I think it would be really useful to see how sound sync will work when switch the cameras. Thank you
Thank you for your comment. Unfortunately I don’t have any product from Cosmo line to test an audio delay. If I get any, I will make a new video.
Thanks for a great video, particularly regarding latency with 2 systems operating simultaneously. On that note, how many systems can run simultaneously as looking at utilising at least 4 if possible.
I am curious to know the same! I would probably use 2-3 of these at the same time.
i am right now trying to figure this out as well, would you jsut need 4 systems or could you have just 4 transmitters and 1reciever?
@@austinscherzberg4569 Each transmitter needs its own receiver as they are operating on different channels. How would you switch with only one receiver?
Great Video! I was planning on purchasing 4 hollyland 300 pros for my sony a6400's. do you think I would have interference between the multiple transmitters? I saw you used 2...but am I pushing it trying 4?
Thanks. I used two Hollyland 400s Pro and one 300 Pro at the same time and I didn’t have any problems. I’m not sure about using four 300 Pro at the same time though. You should try contact them and ask if it’s possible. They have great customer support.
Thank you so much! I’ll do that!
How has it been using 4 at the same time? I'm thinking of using 2-3 at the same time.
Awesome video man!
Super review. Many thanks 👍
excellent review, no stupid unboxing (I mean , who cares what the box looks like) straight into the technical guts of it all and not 1 but 2 units to compare. thumbs up and sub from me. well done.
what a nice video!!! that's what I wanted to know.thank u!!
thanks its really helpful for beginner. what about audio? hollyland mars
Thanks for the insight information bro. I have two sets of Hollyland wireless transmitters and an Atem mimi Pro iso. They work perfectly how my challage is audio when using DSLR cameras. Unless I use external audio capture device.
Thank you for your review. I have one question. Latency of the preview in their app is the same as you would preview though RX?
Andrew, thank you for your comment. I would say the latency is little bit less when your preview video in their app compared through their receiver connected to a monitor.
Grt video, thx. For the wireless set up, how did you connect to internet for streamimg, i.e. was this through wifi again? Or ethernet?
Glad that you liked. If you meant wireless set up using Atem Mini Pro, then yes, I used ethernet to connect to internet. When I connected 400s Pro’s receiver to my laptop using usb c to lan adapter, I just used wifi network. Hope it helped.
@@Hayotfilmscom thx...one goal I have is to see if mobile 3g, 4g or 5g will stream also..and then have 100% wireless set up from camera to viewer.!
@@philpritchard5173 Sometimes we just use our mobile LTE connection for our live stream and depending on the cellular coverage, it works great. I just connect my iPhone to my Macbook using USB cable and turn on personal hotspot on my iPhone. Also using usb c to lan adapter you can share MacBook internet connection with your Atem Mini Pro using ethernet cable.
@@Hayotfilmscom fantastic!!
really good video - helped me a lot... who is the voiceover person i start ... great voice ...
Thank you for this excellent video! This was exactly what my team and I needed. Any chance anyone can point me in the right direction for how to adjust the delays he showed in the video. I have three cameras. One is plugged in directly via HDMI to the ATEM Pro Mini, and the other two are using MARS 400s PROs. I'm just not familiar with the ATEM software, so a link to a tutorial or document would be really helpful.
Just plug n play.. Or must used app to connect video records or pc
good video. good review. thank you :)
awesome video, how did you do the voice over for the intro?
Can you stream a video simultaneously using HDMI and SDI the same time using 400S Pro?
Thank you for the question. I just tested, it doesn’t work. You can stream only one video in the same time.
Good video buddy
Good day! Help me please. Question about Atem mini pro ISO. HDMI output goes to preview. With Tape-c we write to SSD disk. Ethernet goes to a computer for streaming. I would like one more output to the LED screen of the hall. Please tell me what adapters you need?
Hey! Did you have any difficulties setting up the RTSP USB C Lan? I've been trying everything and I can't get it to work. Thanks
Hi, I am also interested in this question. I tried to establish a connection on 3 different computers with Win10,Win7,WinXP via a USB-E Lan 10/100/1000 Mb adapter (aliexpress) strictly following the instructions. Does not work. The Hollyland website has instructions for setting it up, it has a line:
Note: The LAN-Type-C adapter could only be Hollyland Adapter.
In your review, not a proprietary Hollyland adapter. Did you manage to set up RTSP USB C - Lan?
I’ve been talking to support and apparently for it to work you need to purchase the official Hollyland USB C Lan adapter for it to work. Supposedly it has some communication protocols built in that allow it to work. And the only way to purchase it is by contacting sales. I don’t know if it’s worth using that feature anymore. Haha
Great review.
Thank you
Thanks bro. 🙏👍
Great video
Hi, Nice video, you don't have the Shinobi SDI? I think you can connect the Canon to the Shinobi SDI and loop to your MARS
Hi there, yes, you can do that. I just have Shinobi without SDI, so I can use only HDMI input there.
can we talk about HDMI input 1 in the ATEM mini, are you having the same problem?
Isn't the usb c for power only ?
Very informative!! Do you recommend a bonded cellular device like Teradek or LiveU ?
I haven’t used these devices, so unfortunately I can’t comment on this.
Did you experience any interference when using two units of 400S Pro the same time?
Thank you for the question. When we used two units of 400S Pro in our live stream, we didn’t have any interference issue. I think you can use up to 3 units without interfering each other. Hope it helps.
@@Hayotfilmscom Follow up with this question. Do you keep the receivers in different channels or the same when live streaming? Thank you!
Hi Alex, thank you for the question. You should always have to keep different channels for each unit. I would say keep at least 2-3 channels difference. Let’s say if you have two units, put first to the channel 2and the second one to 8. This will help you to prevent any interference issues.
Awesome review! Is a power bank a compatible device for use with the usb-c power output?
Thanks! Yes, you can use a power bank to power your 400s Pro or 300 Pro using USB C cable.
Update: I tried using a power bank with the transmitter however the transmitter was not pairing well with the reciever so I bought an npf970 and now it works well however both the transmitter and receiver are heating up. Don’t know why this is :/
Thanks info
Ayuda no puedo conectar los dispositivos rx y TX y me marca sin canal
thank you
Hi there,
i am currently trying to connect my Mars 400S Pro via rtsp to a PC. Nobody ever talks about any problems at that step. But when i connect it via the recommended rtsp://192.168.218.25:5554 i do not get any signal (neither over VLC nor OBS nor vMix) - i already switched Network cables and tried it on three different PC (using the app i get a signal - so basically it's there and the screen states 1080I50). No success. Do you have to prepare your PC in any way for that (besides activation DHCP which is active by default anyway)?
Hi, honestly I had the same problem as you have. The thing is you can’t use any kind of LAN to USB C adapter. There are some recommended devices. Also Hollyland support team connected using TeamViewer to my laptop to make proper changes to make it work. So I would really suggest contacting Hollyland support on this. They’re very helpful. Good luck.
Where Can i buy the sony MPF 970 battery
how to fix audio delay
when i use mars por 400 no audio?
Co byste doporučil 300 Pro nebo 400S Pro? Děkuji
Díky za dotaz. Já bych řek jsou skoro stejné. 400S Pro má SDI vstup/výstup a trošku další rozsah. Pokud nepotřebujete SDI vstup nebo integrovaný video přenos do počítače přes USB C adaptér, tak v tom to případě 300 Pro je dostačující. Navíc 300 Pro má HDMI Loopout.
If you have your camera set at 4k and record internally to SD card.. can you then connect the camera via HDMI into the 400s and receive a 1080 signal at the receiver ? will it downscale the 4k input to 1080 to allow you to stream at 1080 but still record on the camera at 4k ?
Each camera has it’s own settings for HDMI output. Even if you set your camera to record 4K to internal SD card, you can always set HDMI output to 1080P. At least I have like that in my all Canon and Panasonic cameras. Hope it helped
@@Hayotfilmscom some cameras dont allow the HDMI output to be different from the internal recording resolution though.. it would be good to know if this unit can still downscale in those scenarios when you may need it.. have you tried 4k input to see what it does ?
I just tried it for you using my Canon C200. I changed HDMI output resolution to 4K and it didn’t work. So I think it doesn’t downscale it to FullHD from 4K. I hope it helped
@@Hayotfilmscom no problem.. thank you for the info :)
Hezké video
Díky moc
Is it possible to relink the HD files to camera raw files in daVinci ?
Only manually
Отабек из Узбекистана?