HOW TO SOFT WASH A HOUSE : part 1 how to use a XJET tool in the application of soap on a house .

How to wash a house with x- jet tool .
Disclaimer: if you attempt anything in this video or try to duplicate anything you do so at your own risk! By watching this video you agree to these terms.
In this video I show how to use a xjet soap application tool .. I only have link for xjet if you want the enclosed tank you can find online or if you want to save money just use a bucket I would get a 5 gallon pail with lid and drill a hole in the lid and run hose through it always be cautious you do not want pail to tip over because the soap can kill the grass .
These are affiliate links and I may earn a small commission on qualifying Purchases.at no additional cost to you .commissions used to sustain channel.
Choose appropriate xjet for your machine pay attention to gallons a minute.
How to soft-wash a house (part 2)
• HOW TO SOFT WASH A HOU...
X-jet
amzn.to/3yjvw3n
amzn.to/3NjYMv3
Plastic tank
amzn.to/3peYMmG
Totally a beast machine
amzn.to/3BrNZgb
Telescoping wand up to 4000psi.
amzn.to/3SRbm8C
#softwashing #house #pressurewashing

[@bankruptsee]

Thanks for the video. What's the mix in your pail?

[@peachypound6108]

Just a tip, you can use a 50' to even 100' 3/8 air hose with the X-Jet. It will draw chemical.
You can also get a Chemical rated Back Pack sprayer, but it is always advised to wear thick “ Waterproof” rain gear. DO NOT just wear a t-shirt nor a water Repellent jacket. That’s a No No.

[@capo17hg22]

Great job 👏

[@jasonwright6938]

I use a backpack sprayer to hold the chemicals. Then I don't need to worry about always moving a bucket. It was a simple project, u should give it a try.

[@capo17hg22]

A backpack won’t help for the roof tho, pointless statement

[@jasonwright6938]

@@capo17hg22 The backpack sprayer just holds the chemicals instead of the bucket. It's not to apply the chemicals. So really, ur reply is pointless

[@Skill_Issue92]

Just have to make sure it doesn't leak or you could get some nasty burns down your backside

[@reviewingwhilewalking553]

that sounds pretty dangerous if you have your xjet hose just resting inside an open backpack sprayer

[@jasonwright6938]

@@reviewingwhilewalking553 I drilled a hole in the screw down cap of the sprayer for the X-Jet hose to go through. I also shortened the hose. I've had no issues using mine for the last 2 year.

[@kidkarate856]

Nice👍👍

[@thrlllckr6244]

Thanks …

[@samuelestrada-porter488]

towards the end are your p washing w a J rod? if so what size hole/angle Also how do you like the xjet on the end of a long wand vs just off a gun and quick connect? thanks

[@thrlllckr6244]

That just a extension pole … and I use regular tips 25degree mostly … the x- jet I’m using on the short wand and it’s adjustable I have links in the description … you always want to make sure you get the right size x-jet for your machine the extension pole is more compatible with most machines up to 4000 psi I believe .

[@kingkeng1122]

Nice video bro. Where do you get your bucket/tank from?

[@thrlllckr6244]

There’s a link in description 👍🏻

[@ssplaya713]

Will this product dilute chemical’s and if so by how much? Thank you.

[@thrlllckr6244]

Yes if you click the link you can see they have those little colorful pieces of plastic they can give you any dilution rate . It comes with instructions too.

[@mikesim6589]

I swear I'm not trying to be an a******.
But you should start at the bottom and work your way up when you're applying.
And started the top and worked your way down when you're rinsing.

[@thrlllckr6244]

I agree and that’s what I always do … however I have done this house multiple times and the day I did this it was about 35 degrees …when it’s that cold it gives a lot of working time I can cover the entire area in minutes before the chem. even starts working… I had no time to review the video … however I agree .and 99.9 % of the time I do exactly that … in the heat it’s a much different story and dark color vinyl siding is very dangerous to apply incorrectly… I always use a weaker mix too when I do dark colors to be safe thanks for the input 🙂👍🏻

[@mikesim6589]

@@thrlllckr6244 No problem buddy I was just saying it in case you didn't know.
I appreciate you taking it in the manner that it was meant.

[@timjesse8267]

Why do you bother with the xjet and chemicals when you have to pressure wash the whole thing anyways? Seem like a waste of time

[@thrlllckr6244]

You do not pressure wash the whole thing … only touch up stubborn areas ..without soap you will be there way longer the xjet is what shoots the soap of your choice on the house …