MN82 Toyota Landcruiser THE UPGRADES. They didn’t all fit and the rear axle was broken !
Vložit
- čas přidán 21. 04. 2024
- #mn82 #mn82upgrades #cheaprc #rccrawler #rclandcruiser #budgetrc
MN82 Toyota Landcruiser THE UPGRADES. They didn’t all fit and the rear axle was broken ! Yep not a great experience , should I have saved my money and kept it stock ? What do you think?
Thank you for watching another 110 RC Scale Tales Video . Please comment, give me a like and if not already please subscribe it really does help my channel.
This video was filmed using IPhone 15 Pro MAX and DJI Osmo 4 . Edited on iMovie .
• MN82 1/12 Toyota Land ...
• MN82 1/12 Toyota Land ...
Music from Epidemic Sound please follow link for more information
www.epidemicsound.com/referra...
(C) 110 RC Scale Tales 2024 - Auta a dopravní prostředky
Nice
Thank you
Men... sorry for the bad Luck!
But this is usefull for us as a Awesome info❤
Thks 🎉
Thanks
You're welcome my Friend ❤
Not sure if you've had the same problem as me but it looks like your axle (maybe both) is missing a bearing.
There should be one on the inside of the drive shaft with a small shim/washer and then on the outside of
the case where the driveshaft pokes through I think it's a 6mm x 2.5mm with a 3mm center.
I could see on the video at 5:45 you will notice that the driveshaft is not straight.
If there's no bearing the shaft flops all over the place and binds like crazy.
There is a small 'well' or groove for a bearing to fit into, I guess the Q/C on these parts is non existent.
Yeh I think you’ve nailed the problem, I ended up taking the hop up axles off and returning to stock . I’m tempted with the silver release with more lights . Thanks for watching
Very nice, how is it in perfoming now?
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Hmm wait for the video
I also bought a bunch of metal parts and nothing fits lmao
Yeh a bit disappointing ! The only thing on mine now of hop up parts is wheels and shocks . Thanks for watching
You need to shim the axles so that there's no play inward, both front and rear otherwise it will bind whenever you hit a bump
Yeh would of taken your good advice , both axles are broken now so originals are back on . Not impressed with parts I received so truck is mostly stock original now
@@RcScaleTales broken how? Parts are cheap to replace however, it's not specific to the MN82, seems like all the RBR/C parts have quirks lol
Bummer about the axles and the wheels weren't greatest either 😞
Yeh waste of money really
@@RcScaleTales At least it may be possible to use the metal axle parts to replace and reinforce some of the original parts, like the metal steering knuckles and joints. I experimented by modding my MN82 with a different rear axle configuration that changed the shaft angle and lift and have had good results on the stock parts while I will upgrade the front shaft to metal.
I didn't want to buy a full kit because of both the price and potentially sketchy fitment and tolerances that I've seen other reviewers complain about, so I started stock, thrashed it, and am gradually getting upgrades where they are required.