Video není dostupné.
Omlouváme se.
The BIGGEST RV Inverter I've Ever Installed!!
Vložit
- čas přidán 6. 09. 2021
- This 2007 Country Coach Prevost Bus had a 8000watt dimensions inverter go bad. An inverter of this size is very uncommon. It's also 24VDC and 240VAC so I did not have too many options with replacement. Due to parts unavailability I went with 2 each Victron 5000watt 24VDC inverter chargers as a replacement. This was also my first Victron installation. So join me as I try to figure it out.
Victron 3000watt inverter/charger: amzn.to/2WVXMcH
Victron Cerbo: amzn.to/2VmTE4u
Victron display: amzn.to/3njzy6C
Check out Mortons on the Move: / @mortonsonthemove
Nice install. You need to setup the AC input setting on the Cerbo GX in order to show the AC input on the display. The inverters are also in storage mode. That will need to be turned off using the MK3 or the charger will only charge the batteries to 80%. Victron converters come in storage mode by default.
I’d also check and make sure that “switch as group” is disabled or they will not have any AC power at all when connected to 30 amp power.
Man I actually did a Laugh Out Loud when you mentioned being scared to "Fleep D Sweetch" because I've been in that same spot many times! If you ain't scared, you've become complacent and that's what kills people. You did an jam-up job!
The things that I always watch for is Sparks, Smoke and Smell...One time I was setting up a solar panel setup on my brother-in-law's ClassA and at the exact time I made all the connections LIVE, one of the jackass's that worked for him put something in the shop microwave and it had a foil lined wrapper which of course started sparking and making all the noises you don't want to hear at that time in particular. I jumped all over that dude like he just ran over my dog and he supposedly had no idea I was there ( I was supposed to be all alone). That's my kind of luck though! LoL
LOL Thanks for watching! :)
Im just now catching up on your videos. That was an AWESOME job. electrical isn't my strong suit but you doing in one handed makes it look super easy!! Very cool video!!
That's an incredible amount of power ! You did all of that with one hand lol ! 😆 Your patience and knowledge always seems to pay off ! Thx for sharing.
Scott
A Lot of trial and error! Thanks for watching!
I worked at the local power company for 21 years and can sympathize with the stress of performing the smoke test at the end of the job. Nice job James!
THanks!!!
I said it before - but I'll say it again: you, Sir, are a master of your craft!!!
Thanks!
I know what it’s like to change out one system to an upgraded totally new not spec. That first flip of a breaker is scary.
Terrifying actually lol
Have more confidence in yourself you're a very smart man I'm a little older than you I've been an auto mechanic and a diesel mechanic for the last 35 years I got trust in you you are a very wise man 👍
After seeing you do this, I don't think there isn't a job you can't do. Great job.
Thanks!
Nice job replacing that, I never doubted you. Thanks for another video, stay safe and healthy.
Thanks for the comment, and thanks for watching!
James, I have 100% faith you can do it.
Thanks! I dont! lol
James I sincerely hope you make AT LEAST $150 an hour... your broad ability to troubleshoot, fabricate, create solutions and solve problems is valuable.
thank you very much!
James, you’re showing off now. 😊 I have to admit, roofs must be boring and way too easy for you. I’m starting to see you in a different light. 🤙🏼 Keep up the good work.
Thanks for watching!
Brother, you are a very talented man! The installation looks great and it will probably last for a long time. I've heard from others about how hard these things are to program, but they are really supposed to be some of the best around. Great job James! You are the man!
Thanks 👍
I watched this twice, I REALLY like this idea. Was there cooling in that storage area? I think I would be monitoring the temp in there.
I hate doing jobs that make you shake with fear. That's why we make the BIG bucks, right? Beautiful job buddy, well done.
I'm glad you understand too. I mean, it's difficult to get paid when the components are broken and it's my fault.
@@AZExpert I bet you didn't get a lot of sleep during that job. I am assuming the job was done over a few days? That was defiantly scary, I am sure. Those invertors were VERY expensive.
Great job and I'm glad I can't call you sparky. lol...
me too!
Crips, I was holding my breath and all I was doing was drinking a Coke sitting in my kitchen. Another great job! 😎🇺🇸👍
I Hope you didnt hold it that long!
no job to big no job to small..great job
Well done.
Having spent July in Quartzsite myself, I'd just consider one more thing. Namely, the storage temp range and operating temp range of the Victrons, and maybe adding temp sensors in that bay and inside the inverters. I know that some Victron charge controllers already provide for temp sensor inputs, for purposes such as controlling battery heaters or doing hi/lo temp charging cutoff. I have no idea whether these inverters or their display have that same provision, of if you'd need a separate device.
Now that people have cheap stand-alone WiFi or BlueTooth thermometers in their little 12V compressor fridges or monitoring RV air temp for their pets while they grocery shop, it might be nice to do so for this critical system, even if it needs to be cobbled to a different display or only accessible via an app on their phone.
Nice work James, as always!
Love your videos! Give yourself more credit. I haven't seen anything that you haven't been able to master yet. Thank you for sharing you time with us. We all learn so much from you.
Keep safe and will look forward for your next adventure.
Regards, Myk
Thanks for that!
James hell of a job!
Thanks for watching!
Very nice job. Thank you James for sharing your expertise with us. Happy trails!
Thanks Phil!
Great job, thanks for walking us through the entire process.
You're welcome
James, Excellent job! Very well done. The system is 120/240 volt single phase. Nothing more needs to be said about it. When the screen was showing L1 and L2 watts and combined watts, you take the combined number/240 and the L/120 to get amps. I’m not sure what scares you about AC, but you did pretty well! Only thing I saw that wasn’t quite right was the Romex connector on the FNT at the 50amp box with breaker.
Thanks for the video! Very respectfully, Kevin
BTW. This one got into some of my professional world (kind of)!
I THINK YOU DID A GREAT JOB. I HAVE 2009 COCHMAN SPORTSMAN. ITS FORTY FOOT. I AM VERY NEW TO A BIG COACH LIKE THIS BUT I WATCH YOU AND YOU ARE A GREAT TEACHER. ITS A SHAME YOUR BUSINESS IS NOT IN MY STATE YOU WOULD GET A LOT OF MONEY OFF OF ME.
Just remember to inspect your roof! :)
You definitely have your Crap together in a Ditty Bag with no leaks. Just think all this practice now let’s see what that camp trailer is going to look like out there on the property. A large PV array well pump and a massive sound system that could be heard back in Phoenix. 😁😁😁😂👍💪🏻
YES!
Always in awe James. I have an 06 CC Magna with the 3K Xantrex that I pray will last as long as I have the coach. As I'm sure you know it's stuffed in the electronics bay inside the basement. Definitely something someone thinner and more agile than me has to replace!
I stopped eating 3 years ago to fit in these places
Great job James. You are a genius. My 06 450 Lxi Wanderlodge had 2 Magnum 4500's installed in 2018 prior to my purchase. This is the only bus that I have seen with 2-5000 watt units. I've been out inverted.
LOL
The other input on the home screen is for other charging points, generator or solar systems. The lug connection system is the standard in Europe where Victrons head office is located.
nice job lots of custom design with laying around parts. When you accomplish and defeat a job like this.
You have that feeling of " yea man I whopped this one" James your the man !
Thanks 👍
Nice job making hay out of grass James! You do a great job making things work.
Thanks!
Bravo Bravo installation. 👏
Great job! I'm impressed by your desire to get it right, and doing it.
Thanks for watching!
Well done James! Learned a lot today!
Thank you
You are welcome
Wow, well done my friend. That was amazing.
Thanks for watching!! :)
👍👍 This finished work looks much better and nicer. Always can count on James.
Thanks!
James you are the man. Great job and I knew you could do it.
thanks!
As always nicely done and no smoke
It's always my hope LOL
Good Install job! I would recommend a Brother label maker so you don't have to hand write comments... like remove bolt to slide out inverters.. :)
Thanks for the suggestion
Shall we start a pool on how long it takes for the scowl on his face to be gone? Geez Louise...I was a mineman in the navy..I built,maintained and disassembled various types of under water mines..I have seen that cringe before..job well done brother !
It's been on there for 20 years
@@AZExpert LOL
Was on the edge of my recliner
But I knew you would find a way to get it done. Good job well done
The ways of a true madman . You are very entertaining. Thanks for videos
Thanks!
Thanks for another informative and entertaining video. Closing in on 26k, great work and I hope you're still enjoying making them.
It's a second full time job
Excellent job James I have no idea what you did your the go-to guy
LOL Thanks for watching
That’s nuts. Your like an electrical engineer 👍🏼
LOL something like that
I've had a lot of luck using Master volt mass combi sine wave ,24 volt 4000 watt inverters on large yachts,putt ing 2 together for upwards of 8000, watts.
Great as usual! Thanks for showing the impressive fabrication of the shelf under those massive inverters. Always a pleasure to witness such a profession install.
Hey thanks!
OMG, that was way over my head and I am pretty good on RV repair.
LOL Thanks for watching
So the complaints about the terminals you should never have tools inside the inverter when it is energized. Only test equipment. You are inside of a Arc flash boundary and should treat it as such
You are a master !! Love watching you sweat ! Great job !
Wondering if there will be a overheating problem 🤔
It's all I do. I need an IV bag
Crazy high oil prices which is either great news or the best news ever I'm not sure which.
I think that looks very good and like it was always part of the Coach.
Didn't see you testing the Gen Set with your new set up but I'm sure you did.
Overall an amazing job very well executed as always James, thanks for showing it...
Thanks for watching
You would be surprised how much the Victron systems are becoming the industry standard if you have a question or a stopping point give Dave at AM solar a call he's in Oregon great crew and Victron is their primary go to great products.
It should be a game changer for the owner.
You got this James now talk them into a lithium battery bank.
If only I could...lol
Those are pretty nice units.
Yes they are
Good review on installing big inverters. I hope that there is stain relief on the wires in the back. I wouldn't want them working loose! A plastic cover over those terminals will help prevent accidental shorts.
Check out simpliphi battery system. The batteries are 3.8kw each and can take 100 amps. Its pretty amazing. They also have a all in one set up. Has batteries and hybrid inverter.
Thanks for the suggestion
Fantastic work!!
Thanks for watching!
Very creative build I like how your mind works
Like a madman?
Awesome job James.. I was nervous. For you!!
I'm always a little nervous, Donnie!
They might be a pain to program but I would much rather have victron setup then the volta system I have since it's all locked down and only techs can get into it.
Keep in mind that a 5000 Victron is NOT a 5000 watt sadly, they use a different rating, not true watts... example, the 3000 Multiplus is closer to 2500 WATTS, it's VA they use.
Generators sometimes play the VA vs watts game also. And if your ratio of 5/6 applies to this Victron setup, you can note that 5/6 x 10,000 is 8333 watts. So a better match to the 8000 original, than 10,000 would be.
Thanks for the comment
You are a RV repair God, thanks for all the Info!
Very welcome! Thanks for watching
Love your videos! Always quality repairs!
Thanks!
Well you went with best
"Caution! Genius at work" LOL really nice.
Thanks
Go with smaller lithium batteries which will save room for double 4000w units.
I can only put in what the customer wants to pay for
There is a screen called
Show mobile overview not enabled by default,,,check it out,
Enable this to show the mobile overview page which is designed for Marine and Remote Vehicle applications. This overview gives
direct access to the AC Current limit as well as the On/Off/ Charger-only settings and pump control. Also shows up to four tank levels. (Display & Language)
Good Job! How many days to complete? Also, a how-to on CareFree roof awning replacement on a Country Coach would be cool! :)
I have several awning replacement videos
WOW. You're a genius. Well done!
Wow, thanks!
You the Man... 😎
I am maybe one of them
Did everything work out OK with cooling? I love victron gear, but all the cooling is designed to be mounted upright. I also have my victron multiplus on its back like this (Just a little 3000) and the only problem I ever has was temperature related - Its under my couch and I ended up installing a temperature controlled fan on the front of the couch. Works great now.
There have been no complaints of overheating since it has been installed. I think the aluminum plate helped a great deal, but so far so good. Thanks!
Your touch 50 display should be showing grid power coming in and not say not available. Nice Video. Thanks. Bill’s Cool Projects.
Thanks for the info!
Friggen awesome James!
Thanks!
holy molly $2,500 each???
Nice job James!
Thanks!
Wow…impressive sir…I congratulate you
Thanks!
Ship it to me. I'm not joking. I have a 5KW Quatro (48 volts) in my coach. It's awesome. 2 wow. Those Quatro's can really draw in charge. I had to throttle mine way back. Red should be generator. I use the app to do most of my adjustments. You can turn them on off, switch modes from the app.
did you program the battery type and AH total? that is why you are missing info.
cool like working with inverters
They are expensive to ruin
@@AZExpert I here yea my growatt is to much $$
Nice work.
Thank you
Wow good job. Impressive work.
Thank you very much!
Outstanding! Looks great!
Thanks a bunch!
You, Sir, are a master!!!
Thanks for watching!
You do nice clean work
Thank you! I do my best
Invert light flashing wet
An impressive job!
Thanks!
Great job my dude!
Thanks for watching
Nice work ...again!
lol Thanks...again
Genius.
Sometimes! lol
lmao Victron is one of the best if not the best. expensive very expensive. I use Growatt all in one inverters cause they are way less expensive and do a great job. They also have Mppt which means solar input to each inverter.
Thanks for sharing
FYI Do your self a huge favor and look into hydraulic crimping! Nice Video
I'll check it out!
Nicely done!
Thanks!
That was impressive!
Thanks for watching!
I'm about to install one 5k quattro in our winnebago. Still diagramming. my head is spinning. haha
Good Luck!
@@AZExpert thank you!
Pretty sure that Inverter Service Center in Nashville, TN will fix that Trace
Well I'm in AZ...soooooo lol
Great video - thanks.
Glad you liked it!
Do you ever get easy jobs? Like a Onan carb change?
Nothing is ever easy.
Awesome…
Thanks!
Needs a Battery upgrade to Lithium and Solar Panels
This is one of the reasons that I wouldn't buy a coach older then 9-10 yrs old. But hey to each there own.
Depends on the coach
I don't see any smoke yet....I say that sometimes myself
Still no smoke!
You are the man!
LOL thanks