10 kw power ??? Oh my God ! If you are able to produce 10 ,000 watts power from a 300 watts motor, You are absolutely a Super man .Then it would be very easy to provide enough power for any nation profitably .
Как ни странно но эти ролики набирают миллионные просмотры! И лайкают тупые бездари которые верят во весь этот бред! В школах выучивают дибилов с малолетсва! В италиив школе нету химии, биологии, физики итд итп ! Результат тупой народ! Но самое страшное когда ты пойдешь в госпиталь адвокату механику к хирургу!!!!!!
I wonder why he didn't lift that plywood off the table while it was running? This is a confidence trickster! Prove me wrong! There is a sneaky power connection through a hole in the table. Share a new video with air under the plywood, and passing your hand underneath.
Dude, there is no hole, he connected a 12v wired battery, you can see the wire on the rigth side connected to the little motor, (13:40). This is NOT a free energy proyect
@@pstonard told you already, look at 13:40 and you see the cable at the rigth side of the table, connected to the motor, the motor move the generator, this one transform mechanical energy to electrical again and induce current that ligths the bulb lamps. Sorry if I didn't explain it more datailed but it is hard for me expain thermodynamics and Faraday's inductance law with my English level. Search on youtube more about it and see why bulbs lamps gets on
@@ELCDPMAYOR How much energy is consumed by the light bulbs? Hint: P = V * I How much energy is delivered by the battery? Again P = V * I How much energy is lost in imperfections (electrical resistance, friction, windage)? This trickery does not obey the conservation of energy theorem. It is fake. QED.
@@pstonard dear friend, Battery feeds motor, motor moves generator, generator transforms movement to electricity that ligths the bulbs, that's how it works, I don't have the technical data about battery output, motor output and rpm, the same for the generator and bulbs consumption. I did't build it but the blinking bulbs it is from the alternancy current fron the generator, in fact, some of the bulbs went off, because generator has no output power enogh to ligth them all. I know what you're saying when ask for the data, but it is not fake, it is ineficient, just connect the bulbs direct to the battery that feeds the motor and avoid all the unnecesary work
я автомобильный генератор пристраивал к эл. двигателю от от современной стиралки, убрав диодный мост; так через три минуты работы под тремя нагрузками движок стал задыхаться, то-есть обороты упали, (где-то 11 тыс.оборот в минуту), а этот индеец крутит гену от игрушки......ясен пень что это фуфел для детсада......
Обычный автогенератор на 100 ампер спокойно держит от 8 до 10 кВт. В этом видео показана суть, но сделано коряво. Если все сделать аккуратно и отцентровав магниты все работает!!! Люди пользуются без каких либо проблем.
They just half show the way To build a generator not once did he show that the magnets have to alternate south , north, south, north they could care less if someone waste their time doing something that won’t work they just want those likes and subscriptions which I will not give either but I will hit the dislike for wasting my time..! That he can count on!
Estimado, esto es totalmente falso, ese alternador no alcanza a generar 1 KW La tensión además es muy baja, recuerde que es un alternador de vehículo para cargar una batería de 12 V El motor que utiliza para mover el rotor del alternador es extremadamente débil imposible que pueda mover ese rotor si es que este genera, aún así si logrará moverlo, la fijación del alternador es tan inútil. Es muy larga la lista de inconsistencias técnicas. Es un completo timo
@@petemiddleton64 be careful both of you.. lookup the type of alternator you get first, is it a star or delta winding.. please study before you hookup..
ok basicly you put a lot energy in one motor heating, belt friction, dynamo heating, and get less power out then you loose energy. this johnson motor handles about 100 watts and youre lamps also 100 watts so you loose about more of 100 watts
tout a fait d'accord, il s'agit d'un essai, ..et ça peut marcher, cependant pour appliquer cette technique en grand, cela mérite de savants calculs que je suis bien incapable de faire, malheureusement. comment produire beaucoup, stable, et dans la fréquence, avec quels aimants? comment évaluer la "capacité des aimants...etc etc je susi preneur de tout conseil!
Я не могу понять одну вещь ?. Если это тест, повесьте что-нибудь посерьезнее: микроволновку, холодильник, электрочайник, электроплиту, утюг, телевизор, скороварку, вентилятор и т. д ?. Чтобы знать, стоит ли вообще развивать этот мотор ? для частного дома ?. Каждое новое видео выходит с лампочками, NAFUI они нужны ???.
Двигатель на 1,5 кВт достаточно. Есть кое какие нюансы другие. Генератор нужен мощный. Если 100А генератор нагружать можно до 10квт. Сварочник 7.7квт работает спокойно!
Un bombillo no prende pero en todo caso es muy poco tendrian que probarlo con una lavadora algo que consuma mas de 6 ampers para ver los resultados efectivos saludos espero que lo pongan espero respuesta.
Si funcionara le aseguro que no lo va a eseñar hacer por este medio.y mucho menos arregalarlo asi.esto es puro video para llamar la atencion y ganar por vistas.
@@davidminuesa no amigo...he estado muy ocupado pero se que si funciona pues ya lo había hecho antes... desarmé un carro y vos a utilizar varias cosas para experimentos...saludos
@@cantu3456 Hola Faustino, gracias por tu respuesta. Voy a ponerme con este asunto, a ver si lo consigo hacer funcionar. Aquí en España, la luz se ha convertido en un impuesto de lujo.
А теперь, разберите генератор грузового авто на 24В 100-200А, полюса в виде треугольников на роторе генератора срежьте болгаркой на каждый полюс генератора их всего 12 и вместо них поставьте неодимовые магниты длиной 30мм шириной 20мм и высотой 10мм. Залейте весь ротор эпоксидной смолой. Выведите три конца обмоток генератора это будет три фазы генерируемого напряжения 220-240В. Соедините валы двигателей ременной передачей через шкивы. Подключите к трем фазам генератора трехфазный двигатель через электроавтоматический расщепитель. Раскрутите ротор генератора пока у вас не появится напряжение 220В запуска трехфазного двигателя. И двигатель будет поддерживать вращение генератора постоянно! А с генератора вы еще сможете постоянно снимать по 2000кВт электроэнергии 220В с каждой фазы, так как их фазы три. Такой ролик и не один есть на Ютубе. Но если я оставлю ссылку здесь, под комментарием, Ютуб её не пропустит. And now, disassemble the truck generator for 24V 100-200A, cut the poles in the form of triangles on the generator rotor with a grinder for each pole of the generator, there are only 12 of them and instead put neodymium magnets 30mm long 20mm wide and 10mm high. Fill the entire rotor with epoxy. Bring out the three ends of the generator windings, this will be the three phases of the generated voltage 220-240V. Connect the motor shafts with a belt drive through the pulleys. Connect a three-phase motor to the three phases of the generator through an electro-automatic splitter. Spin the generator rotor until you have 220V to start a three-phase motor. And the engine will keep the generator spinning all the time! And from the generator you can still constantly remove 2000 kW of electricity 220V from each phase, since there are three of them. There is more than one video like this on CZcams. But if I leave a link here, under the comment, CZcams won't let it through.
@@Brilliant_7_7_7 делаю сейчас, Вообще эта тема, с построение мини генераторов на 220В началась после генератора Сёрла. Почитай, чувак собрал генератор на магнитах и не один, а после опрпределенных оборотов генератор потерял при вращении 40% массы. А один образец его генератора на глазах очевидцев просто поднялся в воздух... У него много опытов с магнитными генераторами и то что сейчас собирают самоподдерживающие генерацию генераторы на 220-380В - жалкая реплика...
Buona sera lo cercato di fare anche io così ma non funziona c'è qualcosa che non mi torna. A le spazzole esterne.ed internamente non ho tolto nulla ho messo le calamite s/n . Ho collegato i cavi esterni come ho visto in video testandoli messa la bobina di 35 Fr e nulla non fa niente. Facendolo dlgirare con un avvitatore
Mình cũng mua công nông đời mới máy gắn có nam châm điện OK về mình tháo gỡ chạy chực tiếp 3 pha ra 220v xuất ra chỉ 40W thôi có nam châm điện gắn có rồi thử nghiệm rồi làm quạt gió OK . chạy phát 220v ko được ít von.
It would seem for these bar magnets to work they would have to be polarized in a surprising way, i.e., the bars are not N-S on each end but N-S along its length. By the way they are sticking together it might be so. But I assume the way he rotates each bar would be key, if it is a working motor. Assuming each bar is N-S, N-S, etc. , then I think he would have to rotate each one opposite from the last as he installs it. I will now go back and try to decipher his hand movements...
First bar at 4:07, he rotates 90 deg. clockwise looking at the right end after pulling it loose from the stack. This would be the necessary move if polarized on that edge. No idea if it is N or S, and don't need to know. They just must alternate.
Dear mr. Yasir, the video shows a very big 3.300 uF 450V electrolytic capacitor that has a plus and minus polarity. How come that it can work? Does your alternator produces AC or DC or do you us a diode rectifier?
The purpose of this posting is to generate CZcams ad revenue through view clicks. It has nothing to do with science, engineering, or revealing the hidden power of special magnets or any secret construction skills. Do you think that a discovery of this magnitude, if true, would appear first on a You Tube video?
Alternator generally generates AC current ...it's the duty of the diode rectifier to change it to DC...so it must be DC since he disconnected the rectifier ...what am struggling with is how does he determine the amount of magnets should be enough to generate between 220-250v
Hola, si te fijas bién en el min 13:40, verás que lo que alimenta el motor, es un cable que va desde una batería de 12v al motor, tal y como el creador del video indica, se puede ver el cable al lado derecho, el condensador (creo yo), lo usa para recolectar energía de una fase, ¿con qué fín?, no tengo idea, pero tu observación es buena, ¿cuando se acabe la batería qué?. Saludos
Love your work. This is another video proving Nikola Tesla was right and the aether does exist. We were suposed to have free electricity 1010 years ago but the world controlers did not want that. The aether has infinate energy available in it and all we have to do is convert it. Good job. Keep it up.
The purpose of this posting is to generate CZcams ad revenue through view clicks. It has nothing to do with science, engineering, or revealing the hidden power of special magnets or any secret construction skills. Do you think that a discovery of this magnitude, if true, would appear first on a You Tube video?
@@pstonard This has been shown on youtube time and again over the last 20 years and many times before that in other media for the last 120 years. Free energy has been and is available since the advent of turning magnets to convert the aether to electricity for over 200 years. It was only in 1918 that the physics of the aether was changed with the adoption of the fake Quantum theory and suposid reality of particle physics. Electrons do not move through wires to make electricity travel through wires and never did. The electrical energy is transmitted through a wave of energy vidrating the electrons as the wave of energy moves past them, the same as a wave moves through the ocean, Even in a tidal wave the so cslled particals that are being moved at the start of it are not the particles being washed up on shore at the end of it. Tesla was the one that braught free energy to the masses but the controlers did not want us to have fredom and then move at a very much higher level of self control to a future where we would have been driving nothing but electric cars since 1910 and on the moon in 1930 and Mars in 1935 and the next stay by now. We are not allowed to have that kind of fredom in this world controled by the Jewish cabal. Just imagin that if we had that fredom then cancer and many other deseases would not exist. the many controling wars that we have had and are still having would not exist. Are you able to understand that level of interlectual fredom and the level of human atainment that would be experienced by everyone today.
@@DieterSoegemeier Interesting story you have there! Completely void of any legitimate burden of proof. If this contraption has any merit let's subject it to scientific peer review and document that it really does deliver electrical energy, with an over unity gain. Commonly called perpetual motion, and contrary to the conservation of energy theory. If proved to be real I'm sure there will be no shortage of developers ready and willing to invest and commercialize it. Or, do you have another conspiracy theory that will conveniently stop that from happening?
@@pstonard Yes peer reviewed by those not brainwashed into a system where this is not possiable, for example. Did you know that the guy that came up with the theory conservation of energy, was a guy that believed in aetheric energy, as everyone did before the brainwashing done after 1918. Example; first law of thermodynamics states that 'we can not creat or destroy energy, we can only convert it' This was based on the infinate energy in the aether. Quantum bull shit did not exist then. The energy is there, so why do we not use it. Every generator and alternator on the planet is a free energy converter, its just that we turned to fossle fuels to power it and of course that is so inefficent that it makes it almost impossiable to see any laws of physics do what they are suposed to teach us. The Tesla coil is another free energy device that if used correctly converts electrostatics into electric current but we are not allowed to do that, we use it incorrectly thrning 12 volts into 50,000 v0olts to fire some fuel with a spark plug. Not what Tesla built it for. But sure if you want to get some science quantum geek to look at it, he will dismiss it before he even looks at it. Very scientific.
@@insane.asylum6059 Overlooking the fact that this is a CON, and the project can't possibly work, and if it did, not deliver anywhere near the claimed 10kW The automobile alternator can output AC by direct connection to the Stator windings, and bypass (or removing) the six diodes inside. However, the output frequency will be determined by the Rotor speed, and the number of Poles. The open circuit voltage will be dependent on the Rotor energizing current, and at optimum speed and excitation deliver 12V (after rectification) at up to 95A (depending upon model) giving about 1kW (12 * 95 = 1,140)
Нет инструмента, вот и испортил гайку. С зубилом и молотком только слизанные гайки отворачивать. Зато шурик имеется, но даже бит не оказалось и винты отвёрткой крутил.)))
Odborník na vysoké úrovni když nerozezná alternátor od dynama které se do automobilů už nejméně 45 roků neinstalují pro svou malou účinnost a velké rozměry. Asi bude chlapec z Indie když sedí na zemi asi na ulici před domem a pracuje tradičním způsobem rukama i nohama. Že by další revoluce v miniaturizaci?
I have the same problem. Using a 200 Amp Alternator with 6 Wires from the stator together with an 750W / 50 Hz /3000 rpm 1phase E-Motor and don't know how to wire them, 'cause most people here use an 3-wire Stator in their Alternators...
10 kw power ??? Oh my God ! If you are able to produce 10 ,000 watts power from a 300 watts motor, You are absolutely a Super man .Then it
would be very easy to provide enough power for any nation profitably .
it is possible on youtube only!! hahaha
что, нет специалистов ,что бы это фуфло отсеивать, или разбогатеть кто то решил на лайках ???
Как ни странно но эти ролики набирают миллионные просмотры! И лайкают тупые бездари которые верят во весь этот бред! В школах выучивают дибилов с малолетсва! В италиив школе нету химии, биологии, физики итд итп ! Результат тупой народ! Но самое страшное когда ты пойдешь в госпиталь адвокату механику к хирургу!!!!!!
Прежде чем делать такие выводы и писать комментарии почитай физику!!! У меня все отлично работает!!!
Он вставил в ротор генератора неодимовые магниты даже не отцентровав? Клейком покапал?
Ещё один болгарин Марк))))
which grade magnet should be used ?
Mantap the best Bang 👍👍 Sayangnya aku gak punyak Magnet nya. Karena harga magnet Mahal gak bs beli.
Alsalaam A'alaykum, Masha'Allah ,
Ye generator ke liye kaunsa Alternator suitable hoga
I wonder why he didn't lift that plywood off the table while it was running? This is a confidence trickster! Prove me wrong! There is a sneaky power connection through a hole in the table. Share a new video with air under the plywood, and passing your hand underneath.
Dude, there is no hole, he connected a 12v wired battery, you can see the wire on the rigth side connected to the little motor, (13:40). This is NOT a free energy proyect
@@ELCDPMAYOR Agree this not a Free Energy project. Please explain where you think the energy to light up the bulbs comes from.
@@pstonard told you already, look at 13:40 and you see the cable at the rigth side of the table, connected to the motor, the motor move the generator, this one transform mechanical energy to electrical again and induce current that ligths the bulb lamps. Sorry if I didn't explain it more datailed but it is hard for me expain thermodynamics and Faraday's inductance law with my English level. Search on youtube more about it and see why bulbs lamps gets on
@@ELCDPMAYOR How much energy is consumed by the light bulbs? Hint: P = V * I
How much energy is delivered by the battery? Again P = V * I
How much energy is lost in imperfections (electrical resistance, friction, windage)?
This trickery does not obey the conservation of energy theorem.
It is fake. QED.
@@pstonard dear friend, Battery feeds motor, motor moves generator, generator transforms movement to electricity that ligths the bulbs, that's how it works, I don't have the technical data about battery output, motor output and rpm, the same for the generator and bulbs consumption. I did't build it but the blinking bulbs it is from the alternancy current fron the generator, in fact, some of the bulbs went off, because generator has no output power enogh to ligth them all. I know what you're saying when ask for the data, but it is not fake, it is ineficient, just connect the bulbs direct to the battery that feeds the motor and avoid all the unnecesary work
Quanti Ampere e quanti volts ti fornisce quel progetto?
Chique show 👍🎸!!!!!
Спасибо за видеоролик.
Era mas fácil conectar focos de corriente directa a la batería...
size and strength of your magnets ???
how or with what you measured the 10 kW
This is more like 300W Far from 10kw. And as i can see you did more damage installing that neodimium magnets without knowing witch is S or N.
Yes he knows,but he don't want to give you out the secret.
You have to discover the secret yoursels,like he discover the alternator ruth...
Bu mıknatıslarin özelliklerini söyleyebilir misin aynı nereden temin edebilirim
Thank you so much Yasir Hello.
so I see 4 wires is that an alt or generator?
я автомобильный генератор пристраивал к эл. двигателю от от современной стиралки, убрав диодный мост; так через три минуты работы под тремя нагрузками движок стал задыхаться, то-есть обороты упали, (где-то 11 тыс.оборот в минуту), а этот индеец крутит гену от игрушки......ясен пень что это фуфел для детсада......
таак весь изюм и заключается - в этой самой приблуде от игрушке !!!)))
тока этого- он нам не покажет !!1
А если меньше бы подключил нагрузки? Обороты упали бы? И подключить стабилизатор напряжения пытался?
Это где такие движки в стиралке, что 11тыс выдают?))
Обычный автогенератор на 100 ампер спокойно держит от 8 до 10 кВт. В этом видео показана суть, но сделано коряво. Если все сделать аккуратно и отцентровав магниты все работает!!! Люди пользуются без каких либо проблем.
Você não colocou Norte e Sul?
Tem que Colocar este Capacitor?
Ou pode ser sem o Capacitor?
Responda por E-mail Obrigado 🤠
Also plz. Share car alternator specifications.
Idea is good. What is the technical specification of magnet & capacitor
Możesz mi podpowiedzieć jak się fachowo nazywa ten pasek zębaty z tymi przekładniami.
Ciao ..dove hai acquistato calamite cosí lunghe..?
Comunque bel video..
Ti ringrazio anticipatamente per la risposta..
Grazie
La idea la apollo pero el motor deve llevar una polea grande mientras el alternador una chica asi lograra mas bueltas
bravo, magnifique conception
What is the rpm of alternater
What is directions of magnets
And can you run a 750w Or 1000w motor from this
They just half show the way
To build a generator not once did he show that the magnets have to alternate south , north, south, north they could care less if someone waste their time doing something that won’t work they just want those likes and subscriptions which I will not give either but I will hit the dislike for wasting my time..! That he can count on!
what for is that capacitor?
How would you know where to wire in the capacitor?
Like how would you know which 2 wires out of the 4 total that you used ?
czcams.com/video/AyaV6eswOSc/video.html
Look at it with an alternator in front of you and you ca figure out which wires you need by the way it’s laying in this video
how is getting current the small motor ?
par batterie!😀
👏👏👏👏👏👏👏.
Bravo!!!!!!! Que gran Show!!!!!!.
Exelente 😒
Con un esquema eléctrico ayudaría, para mi siguiente proyecto.
Estimado, esto es totalmente falso, ese alternador no alcanza a generar 1 KW
La tensión además es muy baja, recuerde que es un alternador de vehículo para cargar una batería de 12 V
El motor que utiliza para mover el rotor del alternador es extremadamente débil imposible que pueda mover ese rotor si es que este genera, aún así si logrará moverlo, la fijación del alternador es tan inútil.
Es muy larga la lista de inconsistencias técnicas.
Es un completo timo
where can I have these magnates plz tell
Magnetic energy, good job
3
Can a 220 wading plan work on dat
Love the idea going to try it myself .😇😍😍🤪
and me
@@petemiddleton64 be careful both of you.. lookup the type of alternator you get first, is it a star or delta winding.. please study before you hookup..
1.알터네이터 코일 결선방법
2.강한고 큰자석 n52사용
3.자석 정확한 위치에 장착
4 구동모터 1500rpm이상
750w이하사용 권고합니다
권투를 빕니다
@@sksdksckddn 당신이 맞습니다, 당신은 전자 제품에 대한 경험이 있습니까?
@@justchris846 계속 공부중이에요
ok basicly you put a lot energy in one motor heating, belt friction, dynamo heating, and get less power out then you loose energy. this johnson motor handles about 100 watts and youre lamps also 100 watts so you loose about more of 100 watts
tout a fait d'accord, il s'agit d'un essai, ..et ça peut marcher, cependant pour appliquer cette technique en grand, cela mérite de savants calculs que je suis bien incapable de faire, malheureusement. comment produire beaucoup, stable, et dans la fréquence, avec quels aimants? comment évaluer la "capacité des aimants...etc etc je susi preneur de tout conseil!
Ce model de alternator este 12 sau 24v si citi A
Hi, bro! Use a key to undo the nut.... What a nutter... 🗝️😉™️☑️🆗👍
Я не могу понять одну вещь ?. Если это тест, повесьте что-нибудь посерьезнее: микроволновку, холодильник, электрочайник, электроплиту, утюг, телевизор, скороварку, вентилятор и т. д ?. Чтобы знать, стоит ли вообще развивать этот мотор ? для частного дома ?. Каждое новое видео выходит с лампочками, NAFUI они нужны ???.
Ты что в школе плохо физику учил, чтобы крутить 1 квт генератор, нужно 1,2 квт двигатель. Поэтому какой мощности они привод поставили то и нагружают
czcams.com/video/AyaV6eswOSc/video.html
Двигатель на 1,5 кВт достаточно. Есть кое какие нюансы другие. Генератор нужен мощный. Если 100А генератор нагружать можно до 10квт. Сварочник 7.7квт работает спокойно!
Похоже надо свое видео делать))
Осталось моторчик от этого же конденсатора запитать 😂😂😂
Need a link to the magnets pls
will you make generator for me? how to order?
Bom dia felicidade paz legal parabéns.
Полная ерунда. Сделал все так. Неработает вообще😮
Может что то подсоединил не так?
wow so cool
Un bombillo no prende pero en todo caso es muy poco tendrian que probarlo con una lavadora algo que consuma mas de 6 ampers para ver los resultados efectivos saludos espero que lo pongan espero respuesta.
La verdad q 4 bombillos no son nada asi sean de 100 W CU no llegan a un amper y todos hacen la misma prueba
Si funcionara le aseguro que no lo va a eseñar hacer por este medio.y mucho menos arregalarlo asi.esto es puro video para llamar la atencion y ganar por vistas.
@@geminisvelos Esos y muchos + si no la mayoria son pura paja
왜 저는 안될까요
220볼트 모터로 직접 전기를
연결해서 돌리면ac4-8v가최고전압이에요
어떻게해야 하나요
Os vídeos destes tipos e so tretas tudo aldrabice
Clever magnet placement
How can you remove a nut with a hammer and chisel, what technique is this?
Tengo un alternador y lo voy a probar para ver si funciona así..gracias por la gran idea..saludos desde Allende nuevo leon México
Muestras el resultado...
@@serjim claro... saludos
Hola compañero, ¿Cómo llevas el proyecto? ¿Has conseguido hacerlo funcionar?
@@davidminuesa no amigo...he estado muy ocupado pero se que si funciona pues ya lo había hecho antes... desarmé un carro y vos a utilizar varias cosas para experimentos...saludos
@@cantu3456 Hola Faustino, gracias por tu respuesta. Voy a ponerme con este asunto, a ver si lo consigo hacer funcionar. Aquí en España, la luz se ha convertido en un impuesto de lujo.
If you try to do it yourself one day, you will see all of the details in this video are not true and against basic knowledge.
10 kw ma quante ampere?
Esse Matosinhos é de 12 V ou de ernergia
А теперь, разберите генератор грузового авто на 24В 100-200А, полюса в виде треугольников на роторе генератора срежьте болгаркой на каждый полюс генератора их всего 12 и вместо них поставьте неодимовые магниты длиной 30мм шириной 20мм и высотой 10мм. Залейте весь ротор эпоксидной смолой. Выведите три конца обмоток генератора это будет три фазы генерируемого напряжения 220-240В. Соедините валы двигателей ременной передачей через шкивы. Подключите к трем фазам генератора трехфазный двигатель через электроавтоматический расщепитель. Раскрутите ротор генератора пока у вас не появится напряжение 220В запуска трехфазного двигателя. И двигатель будет поддерживать вращение генератора постоянно! А с генератора вы еще сможете постоянно снимать по 2000кВт электроэнергии 220В с каждой фазы, так как их фазы три. Такой ролик и не один есть на Ютубе. Но если я оставлю ссылку здесь, под комментарием, Ютуб её не пропустит. And now, disassemble the truck generator for 24V 100-200A, cut the poles in the form of triangles on the generator rotor with a grinder for each pole of the generator, there are only 12 of them and instead put neodymium magnets 30mm long 20mm wide and 10mm high. Fill the entire rotor with epoxy. Bring out the three ends of the generator windings, this will be the three phases of the generated voltage 220-240V. Connect the motor shafts with a belt drive through the pulleys. Connect a three-phase motor to the three phases of the generator through an electro-automatic splitter. Spin the generator rotor until you have 220V to start a three-phase motor. And the engine will keep the generator spinning all the time! And from the generator you can still constantly remove 2000 kW of electricity 220V from each phase, since there are three of them. There is more than one video like this on CZcams. But if I leave a link here, under the comment, CZcams won't let it through.
mbm, ты сам это делал?
@@Brilliant_7_7_7 делаю сейчас, Вообще эта тема, с построение мини генераторов на 220В началась после генератора Сёрла. Почитай, чувак собрал генератор на магнитах и не один, а после опрпределенных оборотов генератор потерял при вращении 40% массы. А один образец его генератора на глазах очевидцев просто поднялся в воздух... У него много опытов с магнитными генераторами и то что сейчас собирают самоподдерживающие генерацию генераторы на 220-380В - жалкая реплика...
@@Brilliant_7_7_7 czcams.com/video/ovSPkIcJJDk/video.html
Скинь ссылки где можно почитать и ознакомиться
Would it be possible to turn a motor using a small car alternator with magnets?
No spanners no sockets to remove the nut on pulley just wondering 🤔
Sua ideia é linda simples, mas você teve que pensar nisso.👌👌👌👌👍👍👍
BORZALOM ! ---ebből három másodperc is elég volt ! ! !
Как определить какие магниты нужны?
Esse alternador só gera bem com RPM alta 👍
Quantos.de saida
These are impossible because the coil is not proportional to the voltage you need
Como se le ocurre quitar una tuerca con un martillo y cincel que técnica es esta??
كم يبلغ الكابستر بالميكرو فراد ممكن توضيح
Were will get magnet
알터 코일결선을바꾸어야 하나요
How many inches of magnets how many kilowatts ??
Ok felicitări
Buona sera lo cercato di fare anche io così ma non funziona c'è qualcosa che non mi torna.
A le spazzole esterne.ed internamente non ho tolto nulla ho messo le calamite s/n . Ho collegato i cavi esterni come ho visto in video testandoli messa la bobina di 35 Fr e nulla non fa niente.
Facendolo dlgirare con un avvitatore
good!!
great
Mình cũng mua công nông đời mới máy gắn có nam châm điện OK về mình tháo gỡ chạy chực tiếp 3 pha ra 220v xuất ra chỉ 40W thôi có nam châm điện gắn có rồi thử nghiệm rồi làm quạt gió OK . chạy phát 220v ko được ít von.
How much hour come use
👍👍👍🌺🌺🌺🌺
실제출력이 맟나요
That's something I did 15 years ago.
adorei seu vídeo
Дайте ему ключи кто-нибудь
How is it 6000?????
Can it really work as 10kw?
watch this. czcams.com/video/QPDt-pfg2JE/video.html
Pero con que alimentas el motor?
Con una batteria nascosta
Loool that thing is running on battery.
Y cuando el motor no tenga corriente como lo prendes
Can you tell me how the magnets are arranged?
Ya I'm also to sure as it's not the way I understand it. N_s _N_s. That's how I believe it should be.
It would seem for these bar magnets to work they would have to be polarized in a surprising way, i.e., the bars are not N-S on each end but N-S along its length. By the way they are sticking together it might be so. But I assume the way he rotates each bar would be key, if it is a working motor. Assuming each bar is N-S, N-S, etc. , then I think he would have to rotate each one opposite from the last as he installs it. I will now go back and try to decipher his hand movements...
First bar at 4:07, he rotates 90 deg. clockwise looking at the right end after pulling it loose from the stack. This would be the necessary move if polarized on that edge. No idea if it is N or S, and don't need to know. They just must alternate.
Aha! Second bar 4:26 I think he flipped clockwise 270 degrees to the necessary direction to achieve alternating poles orientation!!!
Third bar at 4:33 is flipped it 90 deg. CCW viewed from the right or bottom again, correct according to theory!
Dear mr. Yasir, the video shows a very big 3.300 uF 450V electrolytic capacitor that has a plus and minus polarity.
How come that it can work?
Does your alternator produces AC or DC or do you us a diode rectifier?
Good question
The purpose of this posting is to generate CZcams ad revenue through view clicks. It has nothing to do with science, engineering, or revealing the hidden power of special magnets or any secret construction skills.
Do you think that a discovery of this magnitude, if true, would appear first on a You Tube video?
@@pstonard Thanks for your response, I agree with you.
Alternator generally generates AC current ...it's the duty of the diode rectifier to change it to DC...so it must be DC since he disconnected the rectifier ...what am struggling with is how does he determine the amount of magnets should be enough to generate between 220-250v
First of all this is 1000 percent fake
만들어 줄수 있나요
Ну, если с зубила начали откручивать гайку, то будет работать!
А где же помощь какой то матери?
عالی بود
Hi, why don't put în all the hols N~S~N~S?
Cuando se agote la batería que está disimulada en el falso condensador se para, verdad ?
Hola, si te fijas bién en el min 13:40, verás que lo que alimenta el motor, es un cable que va desde una batería de 12v al motor, tal y como el creador del video indica, se puede ver el cable al lado derecho, el condensador (creo yo), lo usa para recolectar energía de una fase, ¿con qué fín?, no tengo idea, pero tu observación es buena, ¿cuando se acabe la batería qué?. Saludos
Love your work. This is another video proving Nikola Tesla was right and the aether does exist. We were suposed to have free electricity 1010 years ago but the world controlers did not want that. The aether has infinate energy available in it and all we have to do is convert it. Good job. Keep it up.
The purpose of this posting is to generate CZcams ad revenue through view clicks. It has nothing to do with science, engineering, or revealing the hidden power of special magnets or any secret construction skills.
Do you think that a discovery of this magnitude, if true, would appear first on a You Tube video?
@@pstonard This has been shown on youtube time and again over the last 20 years and many times before that in other media for the last 120 years.
Free energy has been and is available since the advent of turning magnets to convert the aether to electricity for over 200 years.
It was only in 1918 that the physics of the aether was changed with the adoption of the fake Quantum theory and suposid reality of particle physics.
Electrons do not move through wires to make electricity travel through wires and never did. The electrical energy is transmitted through a wave of energy vidrating the electrons as the wave of energy moves past them, the same as a wave moves through the ocean, Even in a tidal wave the so cslled particals that are being moved at the start of it are not the particles being washed up on shore at the end of it.
Tesla was the one that braught free energy to the masses but the controlers did not want us to have fredom and then move at a very much higher level of self control to a future where we would have been driving nothing but electric cars since 1910 and on the moon in 1930 and Mars in 1935 and the next stay by now.
We are not allowed to have that kind of fredom in this world controled by the Jewish cabal.
Just imagin that if we had that fredom then cancer and many other deseases would not exist. the many controling wars that we have had and are still having would not exist. Are you able to understand that level of interlectual fredom and the level of human atainment that would be experienced by everyone today.
@@DieterSoegemeier Interesting story you have there! Completely void of any legitimate burden of proof. If this contraption has any merit let's subject it to scientific peer review and document that it really does deliver electrical energy, with an over unity gain. Commonly called perpetual motion, and contrary to the conservation of energy theory. If proved to be real I'm sure there will be no shortage of developers ready and willing to invest and commercialize it. Or, do you have another conspiracy theory that will conveniently stop that from happening?
@@pstonard Yes peer reviewed by those not brainwashed into a system where this is not possiable, for example.
Did you know that the guy that came up with the theory conservation of energy, was a guy that believed in aetheric energy, as everyone did before the brainwashing done after 1918.
Example; first law of thermodynamics states that 'we can not creat or destroy energy, we can only convert it'
This was based on the infinate energy in the aether. Quantum bull shit did not exist then.
The energy is there, so why do we not use it.
Every generator and alternator on the planet is a free energy converter, its just that we turned to fossle fuels to power it and of course that is so inefficent that it makes it almost impossiable to see any laws of physics do what they are suposed to teach us.
The Tesla coil is another free energy device that if used correctly converts electrostatics into electric current but we are not allowed to do that, we use it incorrectly thrning 12 volts into 50,000 v0olts to fire some fuel with a spark plug. Not what Tesla built it for.
But sure if you want to get some science quantum geek to look at it, he will dismiss it before he even looks at it.
Very scientific.
@@DieterSoegemeier And you accuse me of being closed minded...! Good luck to you, I don't think we can be friends.
If you added a torch to that nut it'd come right off with a ratchet easily!
Cu de cua xe hang nao day tkiu
yasir, how did you get 4 wires out of a 3 phase generator? thanks.
NAFUI
@TheCip1977 Not true. A three-phase system only requires three conductors. Take a look outside at over head power lines - there are three, not four.
Alternator wiring are star connection 3phase + neutral
@@insane.asylum6059 Overlooking the fact that this is a CON, and the project can't possibly work, and if it did, not deliver anywhere near the claimed 10kW
The automobile alternator can output AC by direct connection to the Stator windings, and bypass (or removing) the six diodes inside. However, the output frequency will be determined by the Rotor speed, and the number of Poles.
The open circuit voltage will be dependent on the Rotor energizing current, and at optimum speed and excitation deliver 12V (after rectification) at up to 95A (depending upon model) giving about 1kW (12 * 95 = 1,140)
Wrong..
I think maybe this video is better without annoying music 👍👍👍👍👍
Why you are not using any heating element on leash and I have made 10kv you some heating elements like rice cooker heating systems I will see
quelle est la taille de l'aimant..?
А что ключем гайку шкива открутить нее?
Нет инструмента, вот и испортил гайку. С зубилом и молотком только слизанные гайки отворачивать. Зато шурик имеется, но даже бит не оказалось и винты отвёрткой крутил.)))
Dvd?
Odborník na vysoké úrovni když nerozezná alternátor od dynama které se do automobilů už nejméně 45 roků neinstalují pro svou malou účinnost a velké rozměry. Asi bude chlapec z Indie když sedí na zemi asi na ulici před domem a pracuje tradičním způsobem rukama i nohama. Že by další revoluce v miniaturizaci?
Hi, my alternator have 6 wire ….how to connect it? Can you help me? Regards
I have the same problem. Using a 200 Amp Alternator with 6 Wires from the stator together with an 750W / 50 Hz /3000 rpm 1phase E-Motor and don't know how to wire them, 'cause most people here use an 3-wire Stator in their Alternators...
@@jrgjurgenson3540 i try same configuration, but i never go over 50V ac. how to have 220V ac ? i hope someone help us
@@jrgjurgenson3540 łączysz jeden do drugiego .Ostatni i pierwszy to twój plus i minus .To po prostu wyjścia uzwojenia które łączysz .
@@alexdrastico7285 ja uzyskałem 3.5 volt .