Need to move the agling braces for the curl. if you moved the top bars' mount point about 1.5-2.5" closer to the bucket hinge, then you should be able to get a reasonable curl without having to change/remount anything else.
It looks like all the weight is at the rear,and the tongue has to be forced down on the ball hitch! Or does the arm come off the digger for transport? Works pretty good,what size engine is on it and how much is the pump rated at in gpm?
friend owned an old one of these, professional one. but I don't know what happened to it after they sold the farm. I never knew about the clearance auction until a week later.
I know nothing about this machine, but it seems like if it goes up against resistance on a level slightly higher than topsoil then it stops working. Does it have different settings where it can bare down? (I really know zero about what I'm talking about)
Amazon/Ebay/Hydraulics shops. IMO best solution is to get an old tractor, like a Ford 8N or similar, cheap spare parts still available for these, easily rebuildable hydraulic pumps. And get an old Farman/similar sized backhoe for it. This is a setup you can actually do some heavy work with, towable backhoes are too lightweight for rocky soil. Get a used frontloader for it (most people let you have old equipment like that if you just come pick it up) and you can shuffle the dirt back in without spending 13,5 eternities. There are standards to hydraulic cylinders that makes that kind of stuff fully rebuildable and serviceable still so don't get turned off. If you're really hung up about using a towable backhoe simply get a cheap used trailer you can drive the tractor on top of and boom, off you go, no point making something harder than it needs to be. Nothing to it ^^
This would be painful to run compared to my case 580 backhoe! Any resistance at all except the loose soil this guy digs in, and the thing would be all over the place. You need some weight on the outriggers/the machine or that bucket aint going to dig shit but sandy soil.
fuck, man! this is not the worst i've seen! nice one! most other builds utilize much 5 mm plates, which are ass to weld, this one does away with cutting two walls of the square pipe and fitting a smaller square pipe for the next linkage. not shitty, i'd say! and the bucket has nice "fuck you local tractor dealer" written all over it as it's diy, i'd still go with more typical bucket depth, not this shallow, although it looks fairly comfortable for softer gravel. Planning to build my own excavator, hate the word backhoe, for digging for the house basements, etc. You don't by any chance have any plans, arm length, and stabilizer pad geometry, if there is any? suppose you do away with the same trusty 6,5 hp honda 4-tacter and some 2000 psi from the pump? Along with.. what's that bugger - waste valve, eh? for feeding the excess pressure to res.? would appreciate any help. thanks, man.
Sir please please tell me cylinder size and hydraulic motor capacity please and pump It will be ur help to me I have to build my own Please help me i am not a engineer
I agree with the others, your curl isn't the best, maybe you could remount the hyd cylinder. The title reads digging a pond, that soil looks like it's sandy
Every backhoe video I see is someone basically digging in sand or loose soil. Would be nice to see someone digging in the real world with rocks and roots. Just sayin.
I have almost same looking backhoe, but with almost 500cc engine and 60mm hydraulic cylinders at 200bar and it is quite powerfull. Ofcourse, it can not tear the 5cm diameter roots or 0.5m rocks, but it is working pretty good.
Pointless to keep.pilinh dirt up on the edge and letting it fall back in the hole. Second these are piece of shit had one it's slow and wouldn't pick up nothing heavy it would stop waste of money
Dear Friend, Good day ! I am alice from Jining Honor Machinery Co.,Ltd ! It is so much appreciate to receive your inquiry ! Of course! We are the source manufacturer of towable backhoe, with more than 10+ years of production experience. The towable backhoe is our best-selling product in US, UK and Canada. Here attached some more clear photos for your reference ! In order to provide you with the most suitable machine, we have 9 hp, 13hp ,15hp , please confirm to us which one you prefer ? Look forward your early confirmation ! Thanks Alice
Killer man. Been hand digging one. This is definitely on my wish list!
my son got one like this for Christmas form Toys R Us... but seriously...this is a cool way to dig...I' want one
Хорошая штука. У нас на таких медведи работают после того, как выпьют водки и сломают балалайку. 👍
Nice, I would put longer cylinder for more downward curl though. Very nice job.
I’ll collect my social security waiting on you to finish😂😂😂 I’ll stick with my kubota mini track
I wish I had that much topsoil on top of the giant rock I live on.
ya no shit i couldnt dig 5" with it in my solid shale. i would kill for nice ground like that lol.
I would rather live on Rock then ON the Clay i am 😅
Need to move the agling braces for the curl. if you moved the top bars' mount point about 1.5-2.5" closer to the bucket hinge, then you should be able to get a reasonable curl without having to change/remount anything else.
Just wondering. Did it hold water? Doesn't look like it has any clay.
Moves the dirt out And it roller coasters back in. Ahhhhh bright
It looks like all the weight is at the rear,and the tongue has to be forced down on the ball hitch!
Or does the arm come off the digger for transport?
Works pretty good,what size engine is on it and how much is the pump rated at in gpm?
How much does it cost for this one?
friend owned an old one of these, professional one. but I don't know what happened to it after they sold the farm. I never knew about the clearance auction until a week later.
I know nothing about this machine, but it seems like if it goes up against resistance on a level slightly higher than topsoil then it stops working. Does it have different settings where it can bare down? (I really know zero about what I'm talking about)
is that your own design? or what plans/ model is it?
Could you share the features of the 3 hydraulic pistons you use? Thank you
lol try that in new hampshire. the granite state. there is a rock every inch of soil.
That thing needs a longer stroke cylinder for the curl...
How many psi is your pump?
I have been interested in building one of these but I'm curious where do you buy the hydraulics for this?
Amazon/Ebay/Hydraulics shops.
IMO best solution is to get an old tractor, like a Ford 8N or similar, cheap spare parts still available for these, easily rebuildable hydraulic pumps.
And get an old Farman/similar sized backhoe for it.
This is a setup you can actually do some heavy work with, towable backhoes are too lightweight for rocky soil.
Get a used frontloader for it (most people let you have old equipment like that if you just come pick it up) and you can shuffle the dirt back in without spending 13,5 eternities.
There are standards to hydraulic cylinders that makes that kind of stuff fully rebuildable and serviceable still so don't get turned off.
If you're really hung up about using a towable backhoe simply get a cheap used trailer you can drive the tractor on top of and boom, off you go, no point making something harder than it needs to be.
Nothing to it ^^
Mockery of the world real machines
What brand and model is this,,looks like it works pretty well compared to HARBORFREIGHT
Anyone else notice there isnt one rock or tree root in that dirt?? I wonder how it would perform if it hit some resistance??
I love that show Sho Nuff & Bruce Leroy Green!
It would make it more difficult.
I want one of them
HI I like your backhoe it is a pice of work i was planing to biuld one for me what help can i get from you
pond depth?
How would this go in a quartz bedded ground
This would be painful to run compared to my case 580 backhoe! Any resistance at all except the loose soil this guy digs in, and the thing would be all over the place. You need some weight on the outriggers/the machine or that bucket aint going to dig shit but sandy soil.
Will you sell me your Case 580 for $3500, matching the price of this trencher from Harbor Freight?
how do turn the arm left/right? electric motor?
man for small things this little bad boy could be used and could save yourself some ass bustin work
Are you still making these?
Do you still build and sell? How much?
how much do u sell them for
Are you still monitoring this video?
Do you still build it towables?
Are they Highway towable?
Where are you located? I live near Augusta Georgia.
They sell them at Harbor Freight and Northern tool
If you live on sand and silt get one of these.
Скажите какой мотор у вас стоит, и какой насос по производительности если можно номерацию,Спасибо
Tell me what engine you are on, and which pump performance if possible numbering, Thanks
Looks like your go a fall in
You didnt even want the pond, you just needed a reason to use that heheh
Do u still sell these?
nicht ein Steinchen... nicht eine Wurzel..... baggern wie im Sandkasten
Herbert Hoppe
kkkkkkk e muito engraçado
Hello i need plans only to build one same You tell me they price of plans and drawings tnkz...
Kitna price ka hai sir
fuck, man! this is not the worst i've seen! nice one! most other builds utilize much 5 mm plates, which are ass to weld, this one does away with cutting two walls of the square pipe and fitting a smaller square pipe for the next linkage. not shitty, i'd say! and the bucket has nice "fuck you local tractor dealer" written all over it as it's diy, i'd still go with more typical bucket depth, not this shallow, although it looks fairly comfortable for softer gravel. Planning to build my own excavator, hate the word backhoe, for digging for the house basements, etc. You don't by any chance have any plans, arm length, and stabilizer pad geometry, if there is any? suppose you do away with the same trusty 6,5 hp honda 4-tacter and some 2000 psi from the pump? Along with.. what's that bugger - waste valve, eh? for feeding the excess pressure to res.? would appreciate any help. thanks, man.
JurisKankalis மற்றும்
how do I contact you? I need one
Sir please please tell me cylinder size and hydraulic motor capacity please and pump
It will be ur help to me
I have to build my own
Please help me i am not a engineer
Might take awhile
cuanto cuesta uno de estos
Qual preço de uma máquina dessas
How much was a
This has balls and smoothness unlike others but the curl sucks
I agree with the others, your curl isn't the best, maybe you could remount the hyd cylinder. The title reads digging a pond, that soil looks like it's sandy
Every backhoe video I see is someone basically digging in sand or loose soil. Would be nice to see someone digging in the real world with rocks and roots. Just sayin.
I have almost same looking backhoe, but with almost 500cc engine and 60mm hydraulic cylinders at 200bar and it is quite powerfull. Ofcourse, it can not tear the 5cm diameter roots or 0.5m rocks, but it is working pretty good.
let me know I have cash...
Có thể chuyển về việt nam không
Not in my clay :)
Bucket doesn't curl in worth a shit
qysh me maru a din
That sorry
Pointless to keep.pilinh dirt up on the edge and letting it fall back in the hole. Second these are piece of shit had one it's slow and wouldn't pick up nothing heavy it would stop waste of money
pos
Dear Friend,
Good day ! I am alice from Jining Honor Machinery Co.,Ltd ! It is so much appreciate to receive your inquiry !
Of course! We are the source manufacturer of towable backhoe, with more than 10+ years of production experience. The towable backhoe is our best-selling product in US, UK and Canada.
Here attached some more clear photos for your reference !
In order to provide you with the most suitable machine, we have 9 hp, 13hp ,15hp , please confirm to us which one you prefer ?
Look forward your early confirmation !
Thanks
Alice