Thank you so much, you made it look so easy. The minute I finished your video instruction I went and took mine out and replaced it. I'm a 64 year old woman if I can do it anyone can. Just take your time don't be in a hurry. Thank you again.
This was a perfect video. I had already taken off the faucet but couldn't figure out how to do the drain. I'm a female in my mid-70s and it was so easy. To do everything from beginning to end it took me 45 minutes. I have two more to do and they'll each take less than 30 minutes and I will have saved myself $300!! Thanks fo much for this video.
thank you for the video. I'm wrestling with replacing a 1970's BR sink drain (and fixtures)... your vid got me close enough to defeat the old skook design.
Thank you for your video! I replaced mine for the first time! I looked at multiple videos, and yours was the most in depth! Much appreciated for your help, keep up the good work!
Thank you so much for sharing your knowledge with us! I was able to re-putty the drain flange and put the whole thing back together again thanks to your helpful video.
Thanks for the video. I successfully replaced mine after years of putting off buying a whole new sink because I thought that was what I needed to do. Great pace of explaining!
this covers it all in a thorough, easy to understand format. i am very grateful for your instructions and the time spent to produce it and help others.
Only thing I do differently is to add pipe dope on threads where rubber gasket, washer and nut go. Not convinced the rubber seal will always squeeze to the root of the threads
Bought a Jaclo brass and stainless pop-up drain similar to yours. Not much change back from a hunnert dollars. But instructions? No. Not a damn thing. Your video got me there.
Thank you so much for the great video. I am getting ready to replace my pop up drain. Your detail presentation is excellent. Was happy to observe the direction of the gaskets when assembling the nuts. I will be watching your channel. Bill
I was SOOO upset that I had to replace my drain! So ordered from Home Depot and decided to take a crack at it, turning on your video. Did I happen to mention I'm a chick? Anyway, I digress. I just wanted to tell you that my frustration with my sink vanished when I began laughing at your cat inspecting your work, his/her tail in the camera's eye! Kitty says "You did a meow-velous job!" TOO FUNNY! Thanks!
Thank you for your input and for watching. You should see when i'm working and the cat and my dogs all come to see what I'm doing. I hope your replacement of the drain went ok.
Can’t just use any kind of plumbers dope or putty on PVC or ABS it will deteriorate the plastic after awhile. There are specialized sealers to be used on plastic pipe threads that are also good for metal threads, available at big box stores like Home Depot. You may have to cut the vertical portion if too long, should go at least 1” into the P-trap. This video uses an extension on the vertical, something that is usually sold separately. I’m not a plumber just a DIY guy.
Thank you for the video! I was trying to donit myself but the old drain halo on the top won't unscrew...there is cement. I tried to remove it and use the pliers but won't even move. Any recommendation?
Some drain fixtures come with a rubber seal for the drain cap(the piece that the drain neck screws up into), would we put the putty between the seal and cap or under the seal to still be pulled against the drain?
What did you use to 14:19 is that the same thread lock you put on the metal sink drain the same that you used on the PVC? Wasnt sure if there was a specific one to use when connecting metal to PVC
How much would u charge to change the r Toilet and the pedestal sink and also shower doors and the shower faucets and fresh paint ? Just asking because I wouldn’t know how to charge ???
I think I figured it out. Didn’t have the “piece up on the top” screwed on far enough. VERY IMPORTANT!!!!. OMG. I have taken this apart and put it back together so many times……..
My sink drain still leaks. What am I doing wrong???? I bought a new assembly so new washer. It leaks under at the rubber washer. Am I screwing the nut on too hard?
Wish you would have clarification placements on the washers.. you know the rubber seals. There are so many types of styles. Wish you had a few examples. Remember, this is viewed in many Countries and States. Just saying.. 👋🏽😊🇹🇹
All the videos fail to show the other side of the P-trap that do not use screw connectors and have been glued into place. A replacement video showing that is what I need.
![How To Install Bathroom Sink Drain/Faucet, No Leaks Under Gasket, Threads [SOLVED] 2023](http://i.ytimg.com/vi/mTmUO-0ELps/mqdefault.jpg)
Thank you so much, you made it look so easy. The minute I finished your video instruction I went and took mine out and replaced it. I'm a 64 year old woman if I can do it anyone can. Just take your time don't be in a hurry. Thank you again.
Glad it helped! Great job.
This was a perfect video. I had already taken off the faucet but couldn't figure out how to do the drain. I'm a female in my mid-70s and it was so easy. To do everything from beginning to end it took me 45 minutes. I have two more to do and they'll each take less than 30 minutes and I will have saved myself $300!! Thanks fo much for this video.
I want to thank you never had anyone teach me things like this and you just saved me so much time and money so I thank you sir
You are so sweet to do this. My husband won't take care of my sinks, and both of them have a problem. Now I can fix them! Thank you!
You are so welcome!
thank you for the video. I'm wrestling with replacing a 1970's BR sink drain (and fixtures)... your vid got me close enough to defeat the old skook design.
Glad it helped
I didnt understand how the drain close open thing worked, thank you!!!
Thank you for your video! I replaced mine for the first time! I looked at multiple videos, and yours was the most in depth! Much appreciated for your help, keep up the good work!
Glad it helped!
@@getitdonehomerepair Great Video! Lots of detail and easy to follow! Subscribed way back!
Thank you so much for sharing your knowledge with us! I was able to re-putty the drain flange and put the whole thing back together again thanks to your helpful video.
Glad it helped
Thanks for the video. I successfully replaced mine after years of putting off buying a whole new sink because I thought that was what I needed to do. Great pace of explaining!
You're welcome!
Love the name! Get it Done! Giving all your viewing inspiyright from the start!! And this video was EXTREMELY INFORMATIVE! Great details! Thank you!!
I appreciate that!
I appreciate that!
Very well done video. Instructions were clearly laid out and simple to follow. Like the kitty helper making sure you were doing it right!
I've done this before but always forget exactly how, your video walked me right through it, thank you!
Glad I could help!
Excellent video with easy,simple step by step instructions to get the job done.
this covers it all in a thorough, easy to understand format. i am very grateful for your instructions and the time spent to produce it and help others.
Glad it was helpful!
Thank you for your help. I was struggling to fix this for the last one hour. Watched this and fixed it in couple of minutes. Really useful.
Glad it helped
Awesome video! Clear and thorough! Tackled the first drain successfully. Two more to go!
Thanks for watching. I'm happy to help.
This was EXTREMELY helpful! Saved me a lot of time and frustration. Thank You!
You're welcome!
Bout' to do my first tomorrow. Thank you for making a concise video and simply explained. Much appreciated.
Glad it was helpful. Thanks for watching. Don't forget to sub.
Thanks, last time I made a mess. Now on this replacement I followed all steps and did it pretty neat!
Glad it helped!
Only thing I do differently is to add pipe dope on threads where rubber gasket, washer and nut go. Not convinced the rubber seal will always squeeze to the root of the threads
Thank you so much for this video. I just got done doing two drains. Great instructions!
Glad it helped!
Excellent video. Going to the hardware store and get me a new drain to install using your procedure
Glad it helped
Useful video, thank you. And I love the photo-bombing cat, lol.
Glad it helped! The cat just wanted to make sure I was doing a good job.Lol
Thank you. Your video was of the same drin as the one I was removing.
Glad it helped
Well done, thanks!
Glad it was helpful!
You explained this very well. I watch a lot of DIY videos and most are not presented as well as this
Glad it was helpful! Thanks for watching.
Very informative and thorough.
Heading back to HD because I forgot all kinds of stuff🤦
Thank you
Glad it was helpful!
Bought a Jaclo brass and stainless pop-up drain similar to yours. Not much change back from a hunnert dollars. But instructions? No. Not a damn thing. Your video got me there.
Great video, thanks
No problem 👍
Very clear video, well explained, step by step process for drain replacement. Thank you much!!!
Glad it helped
Thank you so much
You're most welcome
Very thorough! I have about the same hardware, though the thread lock I have is a little different. Answered all my questions. Thanks!
Glad it was helpful!
Perfect. Exactly what I needed to see because sure can't rely on my memory. Lol much thanks.
Glad I could help!
I'm not a handyman but you just helped me to fix my wife's sink easily. She think I'm a genius.
Glad you liked it! I'm happy to help.Great job.
Thank you so much for the great video. I am getting ready to replace my pop up drain. Your detail presentation is excellent. Was happy to observe the direction of the gaskets when assembling the nuts. I will be watching your channel. Bill
Welcome to the channel.
Thank you for a great video. Followed your advice and everything worked out.
you are a LIFE saver, thank you so much
Glad it helped!
Good video. Will do this tomorrow. 😀
Thanks a lot for your clearly explain how to replace it
Glad it helped
thanks for taking the time to make a well explained very detailed instructional video
Glad you enjoyed it!
It was very helpful to fix mine. Thank you!
Glad it helped!
Nice thorough instructional video. This certainly helps me to replace my drain. Thank you.
Glad it helped
Great job, great video! Extremely help. Please contine making excellent videos😊
You are a great teacher! Thanks!
You're very welcome!
Thank you for your help.
Glad it helped
I was SOOO upset that I had to replace my drain! So ordered from Home Depot and decided to take a crack at it, turning on your video. Did I happen to mention I'm a chick? Anyway, I digress. I just wanted to tell you that my frustration with my sink vanished when I began laughing at your cat inspecting your work, his/her tail in the camera's eye! Kitty says "You did a meow-velous job!" TOO FUNNY! Thanks!
Thank you for your input and for watching. You should see when i'm working and the cat and my dogs all come to see what I'm doing. I hope your replacement of the drain went ok.
@@getitdonehomerepair You are sweet! Thank you for having animals. They need us!
great review
Thank you!!! Super helpful video
Glad it was helpful!
Thanks brother for making the video, informative.
Thanks for watching.Glad I could help
Fantastic video. Very helpful. Thank you!
Great video thanks man.
Glad you liked it!
On mine, the little lever inside the drain that pushes the stopper up and down broke off and fell to the p trap....oh, and I like your cat!
Where the bottom gasket (just above the brass nut) goes into the bottom of sink from underneath, any need for silicon and sealant there?
Great job explaining your work. You were very helpful. Thank you!!
Glad it was helpful!
Thank you........Very helpful
You are welcome!
What if I don't have a cat to help? ;-)
Hahaha You will just have to do the best you can.
Thanks, couldn't believe how easy it was. Thanks for the clear instructions.
Glad it helped!
Can’t just use any kind of plumbers dope or putty on PVC or ABS it will deteriorate the plastic after awhile. There are specialized sealers to be used on plastic pipe threads that are also good for metal threads, available at big box stores like Home Depot. You may have to cut the vertical portion if too long, should go at least 1” into the P-trap. This video uses an extension on the vertical, something that is usually sold separately. I’m not a plumber just a DIY guy.
Thank you for the video! I was trying to donit myself but the old drain halo on the top won't unscrew...there is cement. I tried to remove it and use the pliers but won't even move. Any recommendation?
I’m gonna try it pray for my success 🙏😔
Thank you sooooo much !!
You're welcome!
Great video thank you! Noticed the nubble light hat too, fellow Mainer?
Thanks for noticing. I don't live the Maine but I love to visit.
Some drain fixtures come with a rubber seal for the drain cap(the piece that the drain neck screws up into), would we put the putty between the seal and cap or under the seal to still be pulled against the drain?
What did you use to 14:19 is that the same thread lock you put on the metal sink drain the same that you used on the PVC? Wasnt sure if there was a specific one to use when connecting metal to PVC
Here is the link for the product. It is good for metal and plastic
amzn.to/48eWhEU
How much would u charge to change the r
Toilet and the pedestal sink and also shower doors and the shower faucets and fresh paint ? Just asking because I wouldn’t know how to charge ???
Sorry I just work on friends and family homes and I do all the work for free.
I'm not seeing any info, including on the product, about how long to let the thread sealer to cure. Thoughts?
You can use it right away. There is no cure time.
How come my stopper jiggles and tilts in the open position? I have no leaks and it works but its annoying.
I have a popup stopper. When I try to take the tailpiece off, the whole flange inside the sink turns. How do I take the pipes off?
Instead of using thread locker along all the threads, is it safe to go with Teflon tape instead?
Yes, I too prefer Teflon tape.
Is there a beveled gasket on the pivot arm ball? AIs gasket at the nut or at pipe?
I don't think that the pivot arm has a gasket.
I think I figured it out. Didn’t have the “piece up on the top” screwed on far enough. VERY IMPORTANT!!!!. OMG. I have taken this apart and put it back together so many times……..
My sink drain still leaks. What am I doing wrong???? I bought a new assembly so new washer. It leaks under at the rubber washer. Am I screwing the nut on too hard?
Be sure “piece on top” is screwed on tight! Very important!!!!
What are the sizes from the wall to the tail pipe?
Thanks for watching.
Wish you would have clarification placements on the washers.. you know the rubber seals. There are so many types of styles. Wish you had a few examples. Remember, this is viewed in many Countries and States. Just saying.. 👋🏽😊🇹🇹
Thanks for watching.
Instuctive video and the cat made it better.
Thanks for watching.
All the videos fail to show the other side of the P-trap that do not use screw connectors and have been glued into place. A replacement video showing that is what I need.
Thanks for watching.
@@getitdonehomerepair Lots of very practical videos to be sure,,,
Those Chinese chrome units always corrode in 5 years! Especially the trap pipes!
Thanks for watching.
HOW DO YOU GET THE ACTUAL DRAIN OUT OF THE SINK. YOU SKIPPED THAT PART BOTH SIDES ARE LARGER THAN THE DRAIN
See segment 0:53 - 2:57. Hope this helps.
2021 Pandemia. You got another subscriber.. Be safe folks..Get Vaccinated..
Thank you. I agree get Vaccinated.
Meow 😺
Most of the video you see the water bucket, and not what he is trying to show the viewer.
.
There is absolutely no need or good reason to put all that gray crap all over the pipes and fittings.
Thank you! You're a lifesaver.
Glad it helped!
Great video. Very helpful. Thank you 😊
Thanks for your video. Very helpful.
You are welcome!